TE Connectivity

<p>The TE Connectivity 747539-1 is a D-Sub connector housing designed for use with female contacts. It features 15 positions arranged in 2 rows, following the DA (A) shell size layout. The housing is constructed with a steel shell that is tin plated for durability and shielding. The flange is unthreaded, and the mounting type is free hanging (in-line).</p><p>&nbsp;</p><p>This housing is part of the D-Sub, D-Shaped Connector Housings category and is suitable for signal contact applications. The steel shell provides effective shielding against electromagnetic interference. The housing is designed for use with compatible female contacts (not included).</p><p>&nbsp;</p><p>Compliance with RoHS3 and REACH is declared, and the moisture sensitivity level is MSL 1 (unlimited). The part number 747539-1 is cross-referenced as A23478-ND by DigiKey.</p>

<p>The TE Connectivity 1658686-2 is a stamped socket contact designed for use in multi-purpose connector systems. It is constructed from phosphor bronze with a gold plating thickness of 30.0 microinches (0.76 micrometers), providing reliable electrical performance and corrosion resistance.</p><p>&nbsp;</p><p>This contact accommodates wire gauges from 22 to 28 AWG and uses a crimp termination style, making it suitable for automated or manual crimping processes. The socket gender ensures compatibility with corresponding pin contacts in a variety of interconnect applications.</p><p>&nbsp;</p><p>As a multi-purpose contact, it can be used in signal or power circuits within connector housings that accept standard stamped contacts. The gold finish is appropriate for applications requiring low contact resistance and durability over multiple mating cycles.</p>

<p>The TE Connectivity 640427-4 is a 4-position IDC (Insulation Displacement Connector) receptacle from the MTA-100 family. It is designed for 20 AWG discrete or ribbon cable and uses a free hanging (in-line) mounting style. The connector features a 3.96mm (0.156 inch) pitch and a single row of female socket contacts.</p><p>&nbsp;</p><p>Contact plating is tin-lead with a thickness of 80 microinches (2.03 micrometers), providing reliable conductivity. A locking ramp fastening mechanism ensures secure mating with header connectors. The connector housing is yellow and features a closed end design, which helps protect contacts and provides a finished appearance.</p><p>&nbsp;</p><p>This connector is suited for wire-to-board applications in a variety of electronic equipment where a compact, reliable IDC termination is needed. The 3.96mm pitch is common in power and signal connector applications.</p>

<p>The TE Connectivity 141878-1 is a quick connect tab terminal designed for reliable and efficient wire-to-board or chassis connections. This non-insulated male tab features a 0.250" (6.35mm) width, 0.311" (7.90mm) length, and 0.032" (0.81mm) thickness, providing a standard interface for mating quick disconnect receptacles.</p><p>&nbsp;</p><p>Constructed with a brass contact material, this terminal offers good conductivity and mechanical strength. The angled 90° terminal type facilitates compact, space-saving designs where a right-angle connection is required. It is designed for board or chassis mounting and accepts termination methods including screw, rivet, or stud.</p><p>&nbsp;</p><p>The 141878-1 is a 2-tab configuration, suitable for applications needing multiple connection points. The part comes in a bulk packaging format and is marked as RoHS3 compliant and REACH unaffected, though these compliance claims are unverified.</p>

<p>The TE Connectivity 201328-1 is a machined crimp socket contact designed for use with 20-24 AWG wire. The contact is made of brass with a gold plating thickness of 30.0µin (0.76µm), providing reliable conductivity and corrosion resistance. This socket contact is suitable for multi-purpose connector systems requiring a durable and reusable termination method. The crimp termination ensures a secure mechanical and electrical connection when used with appropriate crimping tools.</p>

<p>This TE Connectivity BNC jack connector (female socket) is designed for 50 Ohm coaxial systems and supports frequencies up to 4 GHz. It features a panel mount bulkhead configuration with front side nut mounting, making it suitable for fixed installations where a secure, grounded connection is required.</p><p>&nbsp;</p><p>The connector uses a solder contact termination and a crimp shield termination, and is compatible with RG-174A, 188A, and 316 cable groups. The bayonet lock fastening provides quick connect/disconnect while maintaining reliable RF performance.</p><p>&nbsp;</p><p>The housing is silver-colored, with a phosphor bronze center contact material. This connector is intended for use in RF communication, test equipment, and other high-frequency applications.</p>

<p>The TE Connectivity 1-794612-2 is a stamped crimp pin contact designed for use in rectangular connector housings. It accepts 20 to 24 AWG wire and terminates via a crimp connection. The contact is gold plated with a thickness of 30 microinches (0.76 micrometers), providing reliable conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This pin contact is part of TE Connectivity's broad portfolio of connector contacts and is suitable for a variety of wire-to-wire and wire-to-board applications. The stamped construction offers a cost-effective solution for high-volume production.</p><p>&nbsp;</p><p>The part is packaged in tape and reel for automated assembly. It is listed as RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>This is a 20-position, 2-row male pin header from TE Connectivity, part of their universal header series. It features a 2.54mm pitch and row spacing, with a shrouded 4-wall design for mating alignment and protection. The header is through-hole mounted and terminated via solder.</p><p>&nbsp;</p><p>Electrical ratings include 1A current and 250VAC voltage. Operating temperature range is -65°C to 105°C. The insulation is black UL94 V-0 rated material. Contacts are square male pins with tin finish (30µin). The header includes a keying slot and mounting flange for secure board attachment.</p><p>&nbsp;</p><p>The fastening type is latch lock/eject hooks (long), suitable for board-to-cable/wire applications. The overall contact length is 16.23mm, with a contact length of 6.10mm and insulation height of 13.94mm. The part is RoHS3 compliant (unverified) and MSL level 1.</p>

<p>This is a 60-position, 2-row, shrouded header from TE Connectivity, part of the rectangular connector family. It features a 2.54mm pitch and row spacing, with a board-to-cable/wire style.</p><p>&nbsp;</p><p>The header has a 4-wall shrouded design with long latch lock/eject hooks for secure mating. Contacts are square male pins made of phosphor bronze with a 30µin tin finish. The insulation is black PBT with UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Electrical ratings are 1A per contact and 250VAC. Operating temperature range is -65°C to 105°C. It includes a keying slot for polarization. Mounting is through hole with solder termination.</p><p>&nbsp;</p><p>This connector is suitable for applications requiring reliable board-to-cable connections in industrial, automotive, or consumer electronics where a high pin count and secure latching are needed.</p>

<p>The TE Connectivity 201355-1 is a backplane connector housing with 14 positions arranged in 3 rows. It features a pitch of 3.81mm (0.150 inches), making it suitable for compact backplane interconnect systems. The housing is designed for panel mount installation and comes in a black finish. As a plug connector usage, it is intended for use with corresponding receptacles in backplane applications. The housing provides a sturdy interface for reliable connections in electronic systems.</p>

<p>The TE Connectivity 207719-3 is an AMPLIMITE D-Sub jackscrew socket accessory designed for use with AMPLIMITE Series HDE, HDF, and HDP connectors. This jackscrew socket features a 4-40 socket thread and a 4-40 screw thread, with an overall length of 14.22mm (0.560 inches). Hardware is included with the part, facilitating straightforward installation. The jackscrew socket provides a secure method for mating and unmating D-sub connectors, ensuring reliable cable-to-connector retention in various electronic applications. This component is suitable for use in many industrial and commercial systems requiring D-sub connector hardware.</p>

<p>The 787663-3 is a guide module accessory manufactured by TE Connectivity. It is specifically designed for use with GBIC (Gigabit Interface Converter) connectors, providing alignment and support for the connector interface.</p><p>&nbsp;</p><p>As a pluggable connector accessory, it facilitates proper insertion and retention of GBIC modules in networking equipment.</p>