Eaton - Electronics Division

<p>The Eaton CB61F4A-TR1 is a 4A, 125V AC/DC rated fast blow surface mount fuse. It is designed for board-level overcurrent protection in compact electronic assemblies. The fuse offers a breaking capacity of 100A AC and 300A DC, with a melting I²t of 4.4 A²s. It is housed in a 2-SMD square end block package measuring 6.10mm x 2.57mm x 2.57mm. The part is approved by CQC, cULus, and PSE agencies.</p>

<p>The Eaton AGC-2 is a 2A fast-acting glass tube fuse designed for overcurrent protection in electronic circuits. It is rated for 250V AC and provides a breaking capacity of 100A at 250V AC and 10000A at 125V AC. This fuse features a typical DC cold resistance of 0.078 ohms and a typical melting I²t of 0.00509 A²s. The nominal voltage drop at rated current is 0.28V.</p><p>&nbsp;</p><p>The AGC-2 is housed in a standard 3AB 3AG package measuring 0.250 inches in diameter by 1.250 inches in length (6.35mm x 31.75mm). It requires a holder for mounting and optional axial leads are available. The fuse is UL Listed (card AGC 1/20-10) and CSA Component Acceptance certified.</p>

<p>The Eaton BK1/S505-1-R is a 1A 250VAC cartridge ceramic fuse designed for overcurrent protection in a variety of electronic circuits. It features a slow blow (time-delay) characteristic, making it suitable for applications with inrush currents that would otherwise blow a fast-acting fuse.</p><p>&nbsp;</p><p>This fuse has a breaking capacity of 1.5kA at rated voltage and a melting I²t of 1.28 A²s. It is housed in a standard 5mm x 20mm ceramic body and requires a holder for mounting. The fuse is approved by multiple agencies including BSI, CCC/CQC, CSA, cURus, IMQ, KC, PSE/JET, SEMKO, and VDE.</p><p>&nbsp;</p><p>The BK1/S505-1-R is part of Eaton's S505 series and is marked as RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified.</p>

<p>The Eaton AGX-3 is a 3 ampere, 250 volt fast blow glass cartridge fuse designed for overcurrent protection in a variety of electronic circuits. The fuse features a fast blow response time, making it suitable for applications where quick interruption of overcurrents is required to protect sensitive components.</p><p>&nbsp;</p><p>This fuse is housed in the standard 8AG package with dimensions of 0.250" diameter by 1.000" length (6.35mm x 25.40mm). It requires a separate fuse holder for installation, allowing for easy replacement in panel-mount or in-line configurations.</p><p>&nbsp;</p><p>The AGX-3 carries approvals from CSA, cURus, and UL, indicating compliance with North American safety standards. It is rated with a breaking capacity of 100A at rated voltage, providing reliable fault current interruption.</p>