Assmann WSW Components

<p>The AK-SATA-100 is a 1-meter Serial ATA (SATA) connection cable from Assmann WSW Components. It features 7-pin female receptacles on both ends, designed for external SATA connections. The cable is shielded and uses a flat cable construction with a red PVC jacket. Connectors are black insulator crimp-type with push-pull fastening. The cable is rated for 50 mating cycles and has a Hi-Pot test voltage of 300V DC. Pin assignment follows SATA standard with pins 1-3 as GND and pins 4-7 as signal.</p>

<p>The AWP26-8241-T-R is a 26-position IDC socket connector from Assmann WSW Components. It features a 2.54mm pitch and 2 rows of gold-plated female contacts. The connector is designed for free hanging (in-line) mounting and uses IDC termination for ribbon cable. It includes feed through and strain relief features. The housing is gray. This connector is RoHS compliant.</p>

<p>The Assmann WSW Components A-2004-1-4-LP-N-R is a modular connector jack designed for telecommunications and networking applications. It supports 6p6c configurations (RJ11, RJ12, RJ14, RJ25) and is terminated via solder to a through hole PCB.</p><p>&nbsp;</p><p>This jack features a right angle (90°) orientation with the tab facing down, making it suitable for edge-mounted or low-profile designs. The unshielded construction is appropriate for applications where EMI shielding is not required. A board lock feature secures the connector during soldering and use.</p><p>&nbsp;</p><p>Contacts are made of phosphor bronze with a gold finish, ensuring reliable electrical connections and corrosion resistance. The single-port, single-row design simplifies PCB layout and assembly.</p>

<p>The AWZ-26-T is a strain relief accessory designed for rectangular connectors with 26 positions. It provides mechanical support and prevents cable strain, ensuring reliable connections in various applications. Compliant with RoHS3 and REACH regulations, this part is suitable for use in environments requiring environmental compliance.</p>

<p>The A-DSF09LPIII/FP-R is a D-Sub plug connector from Assmann WSW Components, featuring 9 male pin contacts arranged in 2 rows. It uses IDC termination for ribbon cable connections, making it suitable for mass-termination cable assemblies. The connector has a shell size of 1 (DE, E) and is designed for free hanging (in-line) mounting, with an unthreaded housing/shell flange feature. It includes feed through and strain relief features to protect the cable and contacts. The contacts are rated for signal applications with a current rating of 3A. The insulator material has a UL94 V-0 flammability rating. This connector is commonly used in computer peripherals, data communication equipment, and other applications requiring a reliable 9-pin D-Sub interface.</p>

<p>The A-2014-2-4-N-T-R is a modular connector jack from Assmann WSW Components, designed for 8p8c (RJ45, Ethernet) connections. It features a single port with one row of contacts, making it suitable for standard networking applications.</p><p>&nbsp;</p><p>This jack is mounted through hole and oriented vertically, with solder termination for secure electrical connection. It is unshielded and does not contain an LED. The contacts are made of phosphor bronze with a gold finish, providing reliable conductivity and corrosion resistance. A board lock feature ensures stable attachment to the printed circuit board.</p><p>&nbsp;</p><p>The tab direction is user selectable, offering flexibility in cable insertion. The component is RoHS3 compliant, REACH unaffected, and has an MSL rating of 1 (unlimited). These characteristics make it a versatile choice for Ethernet and data communication interfaces in various electronic devices.</p>

<p>The Assmann WSW Components AWZ-14-T is a strain relief accessory intended for use with 14-position rectangular connectors. Its primary function is to provide mechanical support and protect the cable-to-connector junction from stress and bending forces, enhancing the reliability of the connection in various applications.</p><p>&nbsp;</p><p>The accessory supports 14 positions and is designed as a rectangular connector accessory. The part is compliant with RoHS3, REACH, and has an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions for handling and soldering.</p><p>&nbsp;</p><p>This strain relief is suitable for use in environments where cable movement or vibration could compromise connector integrity. It is classified under rectangular connector accessories and is part of the connectors and interconnects category intended for general signal or low-power connections.</p>

<p>The AWZ-20-T is a strain relief accessory designed for use with rectangular connectors. It accommodates 20 positions, providing strain relief for cable assemblies. The component is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited).</p>

<p>The A-DF 09 A/KG-T2S is a 9-position D-Sub receptacle from Assmann WSW Components, featuring female sockets in a right-angle solder termination for through-hole PCB mounting. The connector uses a steel shell with tin plating and includes board locks for secure attachment. Contacts are brass with gold flash selective Sn plating, rated for 3A current and 250V AC/rms 60Hz. Insulation resistance is 1000MΩ at 500V DC, and the connector can withstand 1000V AC/rms for 1 minute. The operating temperature range is -40°C to +105°C, with a mechanical life of 500 cycles. The insulator is glass-filled thermoplastic PBT with UL94 V-0 flammability rating. This connector is suitable for various data and signal applications requiring a reliable D-Sub interface.</p>

<p>The AWG28-16/G/300 is a 16-conductor flat ribbon cable manufactured by Assmann WSW Components. It is designed for internal wiring applications where space-saving and organized routing are required. Each conductor is 28 AWG stranded wire (7/0.127mm) with a 1.27mm pitch, making it compatible with standard IDC connectors. The cable is rated for 300V and 105°C maximum operating temperature, with a UL Style 2651 listing and VW-1 flame test compliance. The jacket is made of gray PVC, providing good flexibility and insulation. The cable is unshielded, suitable for low-voltage signal and control circuits. It comes in a 300 ft (91.44m) length, ideal for medium to large wiring runs.</p>

<p>The AWP 14-7240-T is a 14-position IDC socket connector from Assmann WSW Components designed for ribbon cable termination. It features a 2.54mm pitch and 2.54mm row spacing with two rows of female socket contacts.</p><p>&nbsp;</p><p>The connector uses IDC (Insulation Displacement Contact) termination for quick and reliable cable assembly. Contacts are finished with gold flash for reliable signal integrity. The gray housing includes feed through and polarizing key features for correct orientation.</p><p>&nbsp;</p><p>This free hanging (in-line) connector is suitable for internal wiring applications where a compact, reliable connection to ribbon cable is required.</p>

<p>The A 14-LC-TT is a 14-position DIP IC socket from Assmann WSW Components, designed for through-hole mounting on PCBs. It features a 0.3" (7.62mm) row spacing and a 2.54mm (0.100") pitch, making it suitable for standard 14-pin DIP ICs.</p><p>&nbsp;</p><p>The socket uses an open-frame construction with a polybutylene terephthalate (PBT) housing and tin-plated phosphor bronze contacts. It is rated for an operating temperature range of -55°C to 85°C, allowing use in a variety of environments.</p><p>&nbsp;</p><p>Termination is via solder connections, and the socket is RoHS3 compliant and REACH unaffected. The MSL rating is 1 (unlimited), indicating no moisture sensitivity restrictions for storage and handling.</p>

<p>The AKSO-200/G is a 2.00mm pitch open top shunt designed for through-hole mounting. It features 2 positions arranged in a 1x2 grid, with female sockets accepting male pin headers. The shunt is rated for 1A maximum current. Contacts are gold finished for reliable low-resistance connections. The housing is made of black Polybutylene Terephthalate (PBT) with a UL94 V-0 flammability rating. Typical applications include configuration jumpers on PCBs, header bridging, and circuit selection. The part is stated to be RoHS3 and REACH compliant, with MSL 1 (unlimited). Lead time and detailed operating temperature range are not specified in available data.</p>

<p>The AWHW10-G-SMD-R is a 10-position shrouded header from Assmann WSW Components, designed for board-to-cable/wire applications. It features two rows of male pins with a 2.54mm pitch and row spacing, surface mount solder termination, and a push-pull fastening type. The insulator is made of PA9T+30% GF (UL94 V-0) in black, and contacts are brass with gold flash plating. Electrical ratings include 3A current, 1000V AC withstand voltage, 20 mΩ max contact resistance, and 1000 MΩ min insulation resistance. Operating temperature range is -40°C to +105°C. The header includes a keying slot and pick-and-place feature for automated assembly. Packing is tube with cap.</p>