Abracon LLC

<p>The Abracon LLC ASFLK-32.768KHZ-LJT is a ceramic SMD crystal oscillator from the ASFLK series, offering a precise 32.768 kHz output frequency for timing applications.</p><p>&nbsp;</p><p>This oscillator operates with a 3.3V supply voltage and features a TTL output type with enable/disable function via a tri-state control. It delivers tight frequency stability of ±20ppm over its full operating temperature range of -40°C to +85°C.</p><p>&nbsp;</p><p>The device is housed in a compact 4-SMD, No Lead ceramic package measuring 5.00mm x 3.20mm x 1.30mm, suitable for high-density surface mount assembly. It supports IR reflow soldering and is RoHS3 compliant.</p><p>&nbsp;</p><p>Key electrical characteristics include 0.5mA typical supply current, 250 ns typical rise/fall time, a 40/60% duty cycle, and low phase jitter of 1 ps RMS. Aging is specified at ±3 ppm/year. The part is supplied in tape and reel packaging with 1000 pieces per reel.</p>

<p>The Abracon ACH-18.432MHZ-EK is a half-size DIP crystal clock oscillator from the ACH series. It operates at a nominal frequency of 18.432 MHz with HCMOS and TTL compatible output logic. The oscillator requires a 5V supply voltage and provides a frequency stability of ±30ppm over the operating temperature range of -20°C to +70°C.</p><p>&nbsp;</p><p>This through-hole component is housed in an 8-DIP, 4-lead metal can package measuring 12.7mm x 12.7mm x 5.6mm. It features a tri-state enable/disable function with active high enable logic. Typical input current is 30mA, with rise/fall time of 10ns and symmetry of 45/55% at half Vdd.</p><p>&nbsp;</p><p>The ACH series is designed for use in microprocessors and digital circuits. The part is RoHS compliant and hermetically sealed, with MSL rating N/A (not moisture sensitive).</p>

<p>This is a 26.54 MHz fundamental mode quartz crystal from Abracon's AB308 series. It is designed for use in microprocessor clocks, consumer electronics, test equipment, and computer peripherals.</p><p>&nbsp;</p><p>Electrical specifications include a frequency tolerance of ±30 ppm at 25°C, frequency stability of ±50 ppm over the operating temperature range of -10°C to +60°C, and a maximum equivalent series resistance (ESR) of 30 Ω. The crystal requires a 16 pF load capacitance and operates at a drive level of 100 µW typical.</p><p>&nbsp;</p><p>The crystal is housed in a cylindrical can with radial leads for through hole mounting. It is RoHS3 compliant and lead free. Standard packaging is bulk of 1000 pieces per bag.</p>

<p>The ASDK2-32.768KHZ-LRT is a surface-mount crystal oscillator (XO) from Abracon’s ASDK series. It operates at a nominal frequency of 32.768 kHz with a CMOS output, making it suitable for timing and clock generation in low-power applications.</p><p>&nbsp;</p><p>The device operates from a 1.8V supply (1.71V to 1.89V) with typical current consumption of 1.0 mA (max 1.5 mA). Frequency stability is ±25 ppm over the operating temperature range of -40°C to +85°C. Output symmetry is 40/60% and rise/fall times are 43 ns typical, 50 ns max.</p><p>&nbsp;</p><p>Housed in a compact 4-SMD, no lead package measuring 2.50 mm x 2.00 mm x 0.95 mm, this oscillator is designed for automated surface mount assembly. It features tri-state enable/disable function and is available in tape and reel packaging (1000 pcs/reel).</p><p>&nbsp;</p><p>Common applications include laptops, digital cameras, wireless LAN, Bluetooth, and mobile communication devices. The ASDK series is RoHS compliant and suitable for reflow soldering.</p>

<p>The Abracon ASEMB-4.000MHZ-XY-T is a MEMS-based XO (standard) clock oscillator designed for high stability and low power consumption. It operates at a frequency of 4 MHz with CMOS output logic. The oscillator offers exceptional frequency stability of ±10ppm over the full industrial temperature range of -40°C to 105°C. It supports a wide supply voltage range of 1.8V to 3.3V, with typical supply current as low as 5mA (no load) at frequencies up to 39.9999 MHz. The device features a standby (power down) function via tri-state enable, with a disable time of 20-100 ns and a standby current of only 15 µA. The ASEMB is packaged in a compact 4-SMD, no lead package measuring 3.20mm x 2.50mm x 0.90mm, suitable for surface mount assembly. It is RoHS/RoHS II compliant and MSL Level 1. Typical applications include consumer electronics, portable electronics, computers and peripherals, and industrial equipment among others.</p>

<p>The Abracon ASFL1-8.000MHZ-EK-T is a standard crystal clock oscillator (XO) designed for surface mount applications. It operates at a nominal frequency of 8 MHz with HCMOS and TTL compatible outputs. The device is powered by a 3.3V supply voltage (2.97V to 3.63V range) and draws typically 8 mA (maximum 15 mA).</p><p>&nbsp;</p><p>This oscillator offers a frequency stability of ±30 ppm over the operating temperature range of -20°C to +70°C. It features a tri-state enable/disable function with a start-up time of typically 1 ms (maximum 10 ms). The output symmetry is 40/50/60% with rise and fall times of 5 ns typical (10 ns max).</p><p>&nbsp;</p><p>The ASFL1 is housed in a compact 5.0mm x 3.2mm x 1.3mm 4-SMD no-lead package, suitable for high-density SMT assembly. The part is available in tape and reel packaging (1000 pcs/reel) and is RoHS3 compliant.</p>

<p>The ABLS2-6.000MHZ-D4Y-T is a 6.0000 MHz quartz crystal from Abracon LLC designed for surface-mount assembly. Operating in fundamental mode with an 18 pF load capacitance, it delivers a maximum equivalent series resistance of 100 Ω and a frequency tolerance of ±30 ppm. The device maintains ±30 ppm frequency stability over the full -40°C to +85°C operating temperature range.</p><p>&nbsp;</p><p>The crystal features a low profile 3.3 mm height and compact 11.40 mm x 4.70 mm HC-49/US package, suitable for thin equipment and RoHS compliant reflow processes. Typical applications include computers, modems, microprocessors, and wireless devices. The package is hermetically sealed, resulting in an MSL rating of Not Applicable for moisture sensitivity.</p><p>&nbsp;</p><p>Specifications also include a shunt capacitance maximum of 7 pF, drive level of 100 µW typical / 1000 µW maximum, and first-year aging of ±5 ppm. Insulation resistance is a minimum of 500 MΩ at 100 Vdc. The part is tape and reel packaged for automated assembly.</p>

<p>This quartz crystal resonator from Abracon's ABLS2 series operates at 14.7456 MHz in fundamental mode with an 18pF load capacitance. It provides a stable frequency reference for microprocessor and wireless applications.</p><p>&nbsp;</p><p>Electrical characteristics include a maximum ESR of 50 Ω, frequency tolerance of ±30 ppm, and frequency stability of ±30 ppm over the operating temperature range. Drive level is typically 100 µW with an absolute maximum of 1000 µW. Aging is limited to ±5 ppm in the first year.</p><p>&nbsp;</p><p>The crystal is housed in a low profile HC-49/US surface mount package measuring 11.4mm x 4.7mm x 3.3mm. It is RoHS3 compliant and hermetically sealed, making it suitable for reflow soldering without moisture sensitivity concerns.</p><p>&nbsp;</p><p>Typical applications include timing references for microprocessors, modems, wireless devices, and other digital circuits requiring precise frequency control.</p>

<p>The Abracon ABMM2-25.000MHZ-E2-T is a ceramic SMD crystal operating at 25 MHz fundamental mode with 18 pF load capacitance. It offers ±20 ppm frequency tolerance and ±20 ppm stability over the operating temperature range of -20°C to +70°C. The equivalent series resistance (ESR) is 40 Ω maximum, with shunt capacitance of 7.0 pF typical. Drive level is 100 µW typical and 500 µW maximum. Aging is ±2 ppm in the first year at 25°C.</p><p>&nbsp;</p><p>Designed for surface mount assembly, the crystal comes in a 4-SMD, no lead package measuring 6.0 x 3.5 x 1.2 mm. It is RoHS compliant and suitable for reflow soldering. Typical applications include microprocessors, modems, communication equipment, and other timing circuits requiring a stable clock source.</p><p>&nbsp;</p><p>The part is available in tape and reel packaging with 1000 pieces per reel. Its compact size and reliable seam-sealed ceramic package ensure high performance in a variety of electronic designs.</p>

<p>The ABLS-8.000MHZ-12-B-4-Y-T is an 8 MHz fundamental mode quartz crystal from Abracon’s ABLS series. It is designed for surface-mount applications and comes in a compact HC-49/US package measuring 11.4 mm x 4.7 mm x 4.2 mm. Key electrical specifications include a load capacitance of 12 pF, a maximum equivalent series resistance (ESR) of 80 Ω, and a frequency tolerance and stability of ±30 ppm over the operating temperature range of -20°C to +70°C. The crystal operates in fundamental mode with a typical drive level of 100 μW. This component is suitable for use in computers, modems, microprocessors, and wireless communication devices. It is RoHS compliant and has an MSL rating of 1 (unlimited). The ABLS series offers tight stability and extended temperature range options, making it a versatile choice for timing applications.</p>

<p>The Abracon LLC ACH-24.576MHZ-EK is a half-size DIP crystal clock oscillator from the ACH Series. It operates at a nominal frequency of 24.576 MHz with HCMOS and TTL compatible output logic. The oscillator requires a 5V supply voltage and draws a typical supply current of 45 mA.</p><p>&nbsp;</p><p>Frequency stability is rated at ±30 ppm overall, which includes initial tolerance and temperature stability. The operating temperature range is -20°C to +70°C. The device features a tri-state enable/disable function with VIH ≥ 2.2V for enable and VIL ≤ 0.8V for disable.</p><p>&nbsp;</p><p>The oscillator is housed in an 8-DIP, 4-lead half-size metal can package measuring 12.70 mm x 12.70 mm with a seated height of 5.60 mm. It is through-hole mountable. Typical start-up time is 1 ms with a maximum of 10 ms. Rise and fall times are 5 ns maximum for frequencies above 24 MHz.</p>

<p>The ABLS-19.6608MHZ-B2-T is a surface mount MHz crystal from Abracon LLC, part of the ABLS series. It operates at a fundamental frequency of 19.6608 MHz with a frequency tolerance of ±20 ppm and stability of ±50 ppm over the -20°C to +70°C temperature range. The equivalent series resistance (ESR) is 40 Ω maximum, and the load capacitance is 18 pF.</p><p>&nbsp;</p><p>This crystal is designed for surface mount assembly in a compact HC-49/US package measuring 11.40 mm x 4.70 mm x 4.20 mm. It operates in fundamental mode and has a drive level of 100 µW typical, with a maximum shunt capacitance of 7 pF.</p><p>&nbsp;</p><p>The ABLS-19.6608MHZ-B2-T is suitable for use in computers, modems, microprocessors, and other wireless applications requiring a stable clock source. The package is compatible with RoHS reflow processes.</p>

<p>The ASFLMB-100.000MHZ-LR-T is an industrial-grade MEMS (Pure Silicon) clock oscillator from Abracon's ASFLMB family. It provides a nominal 100MHz LVCMOS output with an overall frequency stability of ±25ppm over the -40°C to +85°C operating temperature range.</p><p>&nbsp;</p><p>It operates from a supply voltage of 1.8V to 3.3V with a maximum supply current of 15mA (no load). The oscillator features a standby (power-down) function with fast startup time of 3.0ms (max) and disable time of 100ns (max). Output symmetry is 45/55% measured at 1/2 Vdd, and rise/fall times are 3.0ns (max) into a 15pF load.</p><p>&nbsp;</p><p>This device is housed in a 4-SMD, no-lead package measuring 5.00mm x 3.20mm x 0.90mm and is RoHS3 compliant. It is suitable for applications including equipment connected to PCs, portable electronics, consumer electronics, and industrial environments.</p>

<p>The ASDMB-12.000MHZ-LY-T is a MEMS-based clock oscillator from Abracon's ASDMB series. It operates at a frequency of 12 MHz with LVCMOS output logic, designed for low power consumption and compact surface mount applications. The device offers excellent frequency stability of ±10 ppm over its operating temperature range of -40°C to 85°C.</p><p>&nbsp;</p><p>The oscillator supports a wide supply voltage range from 1.8V to 3.3V, with a maximum supply current of 15 mA (typical 5 mA under no load). Features include a standby (power down) function to minimize power consumption when not in use, fast startup time (1.5 ms typical), and low jitter performance (60 ps cycle-to-cycle, 10 ps period RMS).</p><p>&nbsp;</p><p>The part is housed in a miniature 4-SMD, No Lead package with dimensions 2.5 mm x 2.0 mm x 0.9 mm, suitable for high-density PCB designs. It is RoHS3 compliant and has an MSL level of 1 for unlimited floor life. Applications include portable electronics, computers and peripherals, consumer electronics, and industrial equipment.</p>

<p>The ASE-24.000MHZ-LC-T is a 24 MHz crystal oscillator from Abracon's ASE series, featuring CMOS output and a compact 3.2mm x 2.5mm x 1.2mm surface-mount package. It operates from a 3.3V supply voltage (3.135V to 3.465V) and draws 4.4mA to 13mA supply current. The device offers ±50ppm frequency stability over an operating temperature range of -40°C to 85°C. Key electrical characteristics include symmetry of 45% to 55% at half Vdd, rise/fall times of 2.4ns to 4.0ns, and start-up time of 1ms to 2ms. RMS jitter is typically 3.2ps with a maximum of 5ps, and aging is ±3ppm in the first year.</p><p>&nbsp;</p><p>The oscillator includes a tri-state enable/disable function (high impedance when disabled) and can drive a 15pF CMOS load. Output voltage levels are 0.9*Vdd (high) and 0.1*Vdd (low). The base resonator is crystal, and the package is 4-SMD, no lead, suitable for automated assembly. The device is RoHS/RoHS II compliant with MSL level 1 (unlimited floor life). Typical applications include CCD clock for VTR cameras, PC and PC card equipment, PDAs, wireless communication, and laptops/SSDs.</p>

<p>The Abracon ASDMB-24.576MHZ-LC-T is a MEMS-based standard clock oscillator (XO) offering a precise 24.576 MHz output frequency. It features a frequency stability of ±50 ppm over the operating temperature range of -40°C to +85°C. The device operates from a supply voltage range of 1.8V to 3.3V, making it suitable for low-power applications.</p><p>&nbsp;</p><p>Typical supply current is 5 mA for frequencies up to 39.9999 MHz (maximum 15 mA). The output is LVCMOS with high-level output of 0.8*Vdd and low-level of 0.2*Vdd. Rise and fall times are typically 2.4 ns and 2.0 ns respectively with a 15 pF load. The oscillator has a startup time of 1.5 ms typical and 3.0 ms maximum.</p><p>&nbsp;</p><p>Housed in a compact 4-SMD, No Lead package measuring 2.50mm x 2.00mm x 0.90mm, this oscillator is designed for surface mount assembly. It is RoHS compliant and has an MSL rating of Level 1 (unlimited). The device is suitable for applications such as consumer electronics, portable devices, and industrial equipment.</p>

<p>The Abracon LLC ACO-24.576MHZ-EK is a full-size DIP crystal clock oscillator (XO) operating at a nominal frequency of 24.576 MHz. It provides both HCMOS and TTL compatible outputs with a typical supply voltage of 5.0V (4.5V to 5.5V range). The oscillator features a maximum frequency stability of ±30 ppm and a typical supply current of 45 mA.</p><p>&nbsp;</p><p>The device includes a tri-state Enable/Disable function, allowing the output to be disabled for testing or power saving. Output symmetry is specified at 45% to 55% at 1/2 Vdd for HCMOS or 1.4Vdc for TTL. Typical rise and fall times are 5 ns with a 15 pF HCMOS load.</p><p>&nbsp;</p><p>Packaged in a 14-DIP, 4-lead full-size metal can with through-hole mounting, the oscillator measures 20.20 mm x 12.60 mm x 5.08 mm. It is RoHS compliant and hermetically sealed with no moisture sensitivity (MSL = N/A).</p>

<p>This is a MEMS-based XO (standard) oscillator from Abracon's ASDMB series. It provides a 4 MHz LVCMOS output with a frequency stability of ±50 ppm. The supply voltage range is 1.8V to 3.3V, making it suitable for low-power applications.</p><p>&nbsp;</p><p>The oscillator features a standby (power down) function with a typical stand-by current of 15 µA. Electrical characteristics include a typical startup time of 1.5 ms, disable time of 20 ns, and symmetry (duty cycle) of 45% to 55%. Rise and fall times are 1.8 ns and 1.0 ns typical respectively.</p><p>&nbsp;</p><p>The device is housed in a compact 2.5 mm x 2.0 mm x 0.9 mm 4-SMD No Lead package, suitable for surface mount assembly. It operates over a temperature range of -40°C to +85°C and is RoHS compliant with MSL Level 1.</p><p>&nbsp;</p><p>Typical applications include clock generation for VTR cameras, equipment connected to PCs, low profile equipment, computers and peripherals, portable electronics, consumer electronics, and industrial equipment. The MEMS resonator provides robustness in shock-prone and humid environments.</p>

<p>The ABLS-25.000MHZ-K4F-T is a 25 MHz fundamental mode crystal from Abracon LLC's ABLS series. It operates at a frequency of 25 MHz with a load capacitance of 18 pF and a frequency tolerance of ±30 ppm. The equivalent series resistance (ESR) is 40 Ω maximum, and the shunt capacitance is 7 pF maximum. This crystal is designed for surface mount applications and is housed in a compact HC-49/US package measuring 11.40 mm x 4.70 mm x 4.20 mm.</p><p>&nbsp;</p><p>This crystal is suitable for a wide operating temperature range of -40°C to +125°C, making it appropriate for industrial and automotive environments. It is RoHS3 compliant and hermetically sealed, with MSL not applicable. The drive level is 100 μW typical with a maximum of 1 mW, and aging is ±5 ppm in the first year.</p><p>&nbsp;</p><p>Typical applications include computers, modems, microprocessors, and wireless devices. The part is available in Tape &amp; Reel packaging for automated assembly.</p>

<p>The ASTMK-0.001KHZ-LQ-DCC-H-T is a surface-mount MEMS oscillator from Abracon's ASTMK series. It is designed as an XO (standard) type oscillator using a MEMS base resonator to generate a precise 1 Hz output with LVCMOS logic levels.</p><p>&nbsp;</p><p>Key electrical characteristics include a wide supply voltage range of 1.5V to 3.63V over the full -40°C to +85°C operating temperature range, with frequency stability specified at ±100ppm maximum. Core operating current is typically 0.9µA at 1.8V and 25°C, with a maximum of 1.4µA under worst-case conditions. Initial frequency tolerance is ±20ppm at 25°C after reflow, and aging is ±1ppm per year.</p><p>&nbsp;</p><p>This oscillator is housed in a compact 4-SMD no-lead package measuring 2.00mm x 1.20mm x 0.60mm, suitable for space-constrained applications. It is RoHS3 compliant and has an MSL rating of Level 1.</p>

<p>The Abracon ACOL-32.768MHZ-EK is a full-size DIP crystal clock oscillator (XO) operating at 32.768 MHz. It features HCMOS and TTL compatible outputs with a nominal supply voltage of 3.3V (range 2.97V to 3.63V). The oscillator provides an enable/disable function via tri-state control, with output enable time of 4 ms and disable time of 100 ns.</p><p>&nbsp;</p><p>Frequency stability is rated at ±30 ppm over the operating temperature range of -20°C to +70°C. The device draws a maximum input current of 30 mA and offers symmetry of 45% to 55% at 1/2 Vdd for HCMOS or 1.4 Vdc for TTL. Rise and fall time is 5 ns maximum (10 ns with 50 pF load). Output load is 15 pF for the frequency range up to 79.999 MHz.</p><p>&nbsp;</p><p>The oscillator is housed in a 14-DIP, 4-lead full-size metal can package measuring 20.20 mm x 12.60 mm x 5.08 mm, with through-hole mounting. It is RoHS3 compliant and suitable for clock signal sources in digital chips and microprocessors, as well as low power applications.</p>

<p>The ABLS2-12.000MHZ-D4Y-T is a 12 MHz fundamental mode quartz crystal from Abracon LLC's ABLS2 series. It offers ±30 ppm frequency tolerance at +25°C and ±30 ppm stability over the full -40°C to +85°C operating temperature range. The crystal is designed for a load capacitance of 18 pF and features a maximum equivalent series resistance of 50 Ω.</p><p>&nbsp;</p><p>This surface mount crystal is housed in a low-profile HC-49/US package measuring 11.4 mm x 4.7 mm x 3.3 mm. It is hermetically sealed and not moisture sensitive (MSL N/A). The part is supplied in tape and reel packaging suitable for automated assembly.</p><p>&nbsp;</p><p>Typical applications include computers, modems, microprocessors, and wireless devices where a stable and reliable clock source is required. The crystal is RoHS compliant and suitable for reflow soldering processes.</p>

<p>The ABM3B-13.000MHZ-10-1-U-T is a 13 MHz fundamental mode quartz crystal from Abracon LLC, part of the ABM3B series of ceramic SMD crystals.</p><p>&nbsp;</p><p>Key specifications include a frequency tolerance of ±10ppm at 25°C and a frequency stability of ±10ppm over the operating temperature range of -10°C to +60°C. The equivalent series resistance (ESR) is 70 Ω, and the specified load capacitance is 10 pF. The crystal operates in fundamental mode.</p><p>&nbsp;</p><p>It is housed in a 4-SMD, No Lead ceramic package measuring 5.00mm x 3.20mm with a seated height of 1.10mm, suitable for high-density surface mount applications. The component is RoHS3 compliant.</p><p>&nbsp;</p><p>Typical applications include wireless communication equipment and other high-density electronic devices where precise frequency control and tight stability are required.</p>

<p>The Abracon ASFL1-24.576MHZ-EK-T is a 24.576 MHz crystal oscillator (XO) from the ASFL1 series. It features HCMOS and TTL compatible output logic with an enable/disable function. The oscillator operates from a 3.3V supply voltage (2.97V min, 3.63V max) and draws a typical input current of 8 mA (max 15 mA) over the 0.321 MHz to 29.9 MHz range.</p><p>&nbsp;</p><p>Frequency stability is rated at ±30 ppm over the -20°C to +70°C operating temperature range. The device offers typical rise and fall times of 5 ns (max 10 ns), symmetry of 50% typical (40% min, 60% max), and a start-up time of 1 ms typical (10 ms max). Phase jitter is specified at 1 ps max (12 kHz to 20 MHz).</p><p>&nbsp;</p><p>The oscillator is housed in a 4-SMD, no lead package measuring 5.00mm x 3.20mm x 1.30mm, suitable for high-density surface mount assembly. It is RoHS3 compliant and supports a RoHS compliant reflow process. The part is supplied in tape and reel packaging with a standard quantity of 1000 pieces per reel.</p>

<p>The ASFLMB-11.0592MHZ-LC-T is a MEMS-based clock oscillator from Abracon LLC, part of the ASFLMB series. It outputs a 11.0592 MHz LVCMOS signal with ±50 ppm frequency stability over its operating temperature range. The device supports a wide supply voltage range of 1.8V to 3.3V, with typical supply current of 5 mA (no load, Vdd=1.8V, 1.0 to 39.9999 MHz).</p><p>&nbsp;</p><p>Key electrical characteristics include a symmetry (duty cycle) of 45% to 55% at 1/2 Vdd, typical rise and fall times of 1.8 ns and 1.0 ns respectively (CL=15pF), and a startup time of 3.0 ms maximum. The oscillator features a standby (power down) function that disables the output and reduces standby current to 15 µA maximum.</p><p>&nbsp;</p><p>The device is housed in a 4-SMD, No Lead plastic package measuring 5.0 x 3.2 x 0.85 mm, suitable for surface mount assembly. It is designed for industrial temperature environments, rated from -40°C to 85°C. The oscillator is RoHS3 compliant and has an MSL Level of 1 (unlimited).</p>

<p>The Abracon ABL-16.000MHZ-B2 is an HC-49/US (AT49) microprocessor crystal from the ABL series. It operates at a nominal frequency of 16 MHz in fundamental mode with an 18 pF load capacitance. Key electrical characteristics include a maximum equivalent series resistance (ESR) of 40 Ω, frequency tolerance of ±20 ppm, and frequency stability of ±50 ppm over the operating temperature range.</p><p>&nbsp;</p><p>This through-hole crystal is designed for general-purpose timing applications including home electronics, computers, modems, and communications equipment. The resistance welded metal package measures 11.5 x 5.0 x 3.5 mm. Operating temperature range is -20°C to +70°C with a storage range of -55°C to +125°C. The component is RoHS/RoHS II compliant.</p>

<p>The ASV-16.384MHZ-EJ-T is a 3.3V HCMOS crystal clock oscillator from the ASV series by Abracon LLC. It provides a nominal output frequency of 16.384 MHz with a typical frequency stability of ±20 ppm and an overall stability range of ±100 ppm. The device operates over an extended temperature range of -20°C to +70°C and is suitable for RoHS reflow processes.</p><p>&nbsp;</p><p>Key electrical specifications include a typical supply current of 2.0 mA with a 10.0 mA maximum, HCMOS output logic with 15 pF output load, and tri-state enable/disable function. The typical rise/fall time is 3.0 ns with a maximum of 5.0 ns, and the duty cycle is 50% typical. The device is housed in a hermetic seam-sealed 7.0mm x 5.08mm x 1.80mm 4-SMD, No Lead package for surface mount assembly.</p><p>&nbsp;</p><p>This oscillator is designed for clock signaling in microprocessors, PC motherboards, and graphics cards. The part is specified to be Pb RoHS/RoHS II compliant.</p>

<p>The Abracon LLC ABM8AIG-10.000MHZ-12-2Z-T3 is a high-performance MHz crystal designed for automotive and industrial applications. It operates at a fundamental frequency of 10.000 MHz with a load capacitance of 12 pF. This crystal offers a frequency tolerance of ±20 ppm at 25°C and a frequency stability of ±100 ppm over the full operating temperature range of -40°C to +125°C. The equivalent series resistance (ESR) is a maximum of 100 Ω, ensuring efficient oscillation. The crystal is housed in a hermetically sealed 4-SMD, No Lead ceramic package measuring 3.2 mm x 2.5 mm x 0.8 mm, suitable for automated surface mount assembly. It is AEC-Q200 qualified, RoHS/RoHS II compliant, and lead-free, making it ideal for use in automotive electronics such as infotainment, keyless entry, ADAS, and vehicle-to-vehicle communication systems. The drive level is rated at 100 μW maximum, and aging is specified at ±2 ppm per year. With a shunt capacitance of 2.0 pF and insulation resistance of 500 MΩ, this crystal provides reliable performance in demanding environments.</p>