PCE Instruments

The environmental measuring device is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the environmental measuring device also determines the dew point and wet bulb temperature in °C and °F. The heat and climate measurement and installation is therefore one of the core areas of application of the thermo hygrometer. The measurement of ambient humidity and temperature is determined directly via the built-in sensors. In addition, there is the option of showing the dew point temperature and wet bulb temperature on the display. The basis for the calculation are the values ​​transmitted via the sensors. In addition to the large, easy-to-read dual display, which also offers the option of lighting, the environmental measuring device needs six buttons, which is the reason why it is an intuitively operated measuring instrument that performs extensive climate tests in private and professional Area in a simple way. In addition to the one-off measurement with the climate measuring device, condition monitoring can also be carried out over a long period of time. The thermo hygrometer is equipped accordingly.

The hygrometer has a measuring range of 0 ... 30 m / s. In addition to the air flow, the anemometer can also measure the ambient temperature between -20 ... 60°C / -4 ... 140°F and the ambient humidity between 0 ... 100% RH. The telescopic arm can be extended up to a length of 390 mm / 15.4 in. The anemometer is part of the basic equipment of a ventilation technician for regulating and controlling ventilation systems. The hygrometer can be connected to an Android or iOS device via the Bluetooth 4.0 data interface. With the free app, all sensors can be read out by the anemometer. In addition to the normal view of all measurement parameters from the anemometer, the measurement values ​​can also be displayed graphically. Another function is the data recording of the app. This means that all measured values ​​that have been measured by the anemometer are saved directly. After a measurement, the data can be exported as a CSV file.

The thermometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. The measuring range of the hot wire anemometer is between .3 ... 3. m/s / .98 ... 98.4 ft/s. In addition to the flow velocity, the hot wire anemometer can measure the volume flow and the ambient temperature. For each measurement, a Beaufort scale is displayed next to the measured value. The current wind strength can be read from this scale. With the integrated data memory, up to 96 measured values ​​can be recorded with the thermometer. The data can be read directly on the hot wire anemometer. Also, the measured values ​​from the hot wire anemometer can be transferred to a PC via the micro USB interface. Suitable software for the hot wire anemometer is available in the PCE Instruments download portal for further processing of the data. For optimal alignment, the telescopic arm of the thermometer can be extended up to 27 … 99 mm / 1.63 … 38.98 / 29.1". In addition, the head of the hot wire anemometer is semi-rigid and can therefore be aligned in different ways. The battery of the hot wire anemometer with a capacity of 1 mAh enables mobile use. To recharge the battery, the hot wire anemometer must be connected to a 5 V DC micro-USB power supply.

The 3D digital microscope is a digital microscope with its own user interface, in which a variety of analysis functions are available. The live image and the user interface are transmitted together via the VGA connection to the 3D microscope to a connected monitor. For the operation of the user interface with the 3D digital microscope, a commercially available computer mouse is required, which is already included in the scope of delivery. In addition to the VGA connection, the image can also be transferred directly to a PC via the USB interface. The 3D digital microscope is recognized by the connection to a PC as a webcam. This will allow a livestream video broadcast for presentation. Using the 250 mm focusing distance and the 305 x 225 mm platform, you can magnify large objects with the 3D Digital Microscope. Plus. The 3D digital microscope still has an infinitely variable illumination. Thanks to the lighting your object will always be exposed sufficiently. The design of the 3D digital microscope allows a fast assembly and disassembly, making it suitable for mobile use.

The thermometer has a measuring range of -5 ... +5 °C (-58 … 932 °F) and an adjustable emission value between .1 ... 1.. In addition to the current reading, the largest, smallest, average and differential reading can be displayed. This means that the infrared thermometer can be used for many measuring tasks to determine the surface temperature. The multi-point laser on the infrared thermometer is used to align the measuring spot. The measuring spot ratio of the infrared thermometer is 12:1. Any alarm limit values ​​can be stored on the thermometer for checking temperatures. When exceeding or falling below an alarm limit value, the infrared thermometer automatically triggers an acoustic and visual alarm. In addition to the normal temperature measurement, the thermometer has two LED rings, each with 5 LEDs. The blue LED ring on the infrared thermometer is used to find leaks in, for example, air conditioning systems that are provided with a contrast agent. The surroundings can be illuminated with the white LED ring on the infrared thermometer.

With the digital thermometer, surface temperatures can measured quickly and easily. The measuring range of the digital thermometer is ...5°C / 32 ... 932°F. The measured temperature is provided as a 4 ... 2-mA standard signal which means that the digital thermometer can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems. The digital thermometer comes with a mounting plate for fixed installation. The digital thermometer must simply be aligned with the heat source to be measured before starting the measurement. The 1. m cable of the digital thermometer enables flexible use of the very robust device and even if the user opts for fixed installation, operation in areas which are hard to access will not be a problem at all as installation can be carried out quickly and easily. This type of digital thermometer is recommended when the areas to be measured are under high voltage.

) The thermometer is used to check the temperature of food. In addition to the surface temperature via the infrared sensor, the thermometer can also be used to determine the core temperature via the fold-out resistance temperature sensor. Both temperature sensors on the thermometer have a measuring range of -4 ... 3°C / -4 ... 572°F. In addition to the normal measured value display, the thermometer has a temperature display. This display on the thermometer signals whether the temperature of the food being measured is optimal. If the temperature is between 4 … 65°C / 39.2 ... 149°F, this is indicated by a red LED. If the temperature is colder than 4°C / 39.2°F or warmer than 65°C / 149°F, this is indicated by a green LED. This function in the thermometer is particularly important in order to monitor the respective temperature chain. Therefore, the thermometer is used especially in the food industry. The Bluetooth interface enables communication between the thermometer and a mobile Android and iOS device. With the free app for the thermometer, the measured values ​​can be recorded with a mobile device and exported for later analysis. To charge the measuring device, the thermometer can be plugged into the charging station provided. If necessary, the thermometer can also be charged via a 5 V micro USB interface.

The electrical tester is designed for insulation measurements with a test voltage of up to 15 kV. The measuring range from 0 ... 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements. These can be transferred to the software via the interface, which also enables the insulation measuring device to be operated. The electrical tester can also be used to measure AC and DC voltages up to 600 V. The electrical tester is supplied in a robust case that offers IP66 protection even when the lid is closed. In the course of its normal service life, electrical insulation is exposed to various stresses that lead to its deterioration. This is caused by thermal, mechanical and chemical influences as well as moisture. Although the insulation is designed to withstand these stresses over many years, abnormal stresses can intensify the natural ageing process and drastically shorten the service life. It is therefore advisable to regularly check whether an accelerated ageing process is taking place and, if necessary, to determine whether the effects are reversible.

The high-precision Photometer was developed to perform even the most demanding light measurements with the highest accuracy and reliability. Thanks to a spectral resolution of ± 0.2 nm and a reproducibility of ± 0.5 nm, it provides precise and consistent measurement results. The remarkable accuracy of the chromaticity coordinate (Δx, Δy) of ± 0.005 enables exact colour representation and is therefore ideal for applications in light and colour analysis. With a wide illuminance range of 0.1 to 500000 lux and an accuracy of ± 0.1 lux, the Photometer is suitable for both weak light sources and extremely bright environments. The measurement of the correlated colour temperature (CCT) from 1500 K to 100000 K with a deviation of ±0.6 % enables a detailed assessment of the light quality and colour temperature. The Photometer is not only technically powerful but also designed to be user-friendly. The capacitive 5-inch IPS touch screen offers intuitive operation and ensures that all measurement data is clearly displayed, even in difficult lighting conditions. With the integrated rechargeable 4000 mAh lithium-ion battery, the device guarantees long operating times so that even extensive measurements can be carried out without any problems. The internal memory of 8 GB offers sufficient space for a large amount of measurement data which can be saved directly to the device. PC software is available for seamless data processing and advanced analysis functions. This allows measured values to be easily transferred, analysed and archived. This Photometer combines precision, versatility and ease of use in a compact device, making it the ideal solution for professional applications in industry, research and education.

The earth tester is a multifunctional measuring device designed for testing electrical safety in accordance with the standards EN 61557 and DIN VDE 1. It offers many functions specifically designed for the inspection and assessment of electrical installations. The earth tester can perform precise measurements of insulation resistance between live parts and ground. With special functions for RCDs, both Type A and AC-controlled residual current circuit breakers can be efficiently tested, ensuring the proper functioning of these vital protective devices. The earth tester allows for the quick and accurate measurement of loop resistance to ensure that, in the event of a fault current, sufficient resistance is present to ensure a safe disconnection. Additionally, a measurement of the protective conductor resistance allows for checking the continuity of conductors and connections. A graphical representation of the wiring helps the operator perform measurements accurately.  The brightness of the display can be adjusted in 4 levels. An adjustable alarm tone warns of errors or exceeding the limit. The adjustable auto-off time of the earth tester prevents unintentional battery discharge. The device comes with test leads that meet the specific requirements of CAT III / 6 V and CAT IV / 3V. The earth tester offers a user-friendly interface, clear display elements, and a robust construction to meet the requirements in various environments. By complying with international standards, it ensures a safe and reliable assessment of electrical installations according to the highest industry standards.With our optional EVSE test adapters, tests can also be conducted on wall boxes and charging stations for electric vehicles.

The earth tester is a multifunctional instrument designed for testing electrical safety in accordance with standards EN 61557 and DIN VDE 1. It offers many functions specifically designed for the inspection and evaluation of electrical installations. The earth tester can perform precise measurements of insulation resistance between live parts and grounding. In the RCD test, both Type-A and AC, B, B+, and F-controlled residual current circuit breakers can be efficiently tested, ensuring the proper functioning of these vital protective devices. The earth tester allows for quick and accurate measurement of loop resistance to ensure that, in the event of a fault current, there is sufficient resistance to ensure a safe shutdown. Additionally, measuring the protective conductor resistance allows for checking the continuity of conductors and connections. A graphical representation of the wiring helps the operator perform measurements accurately.  The brightness of the display can be adjusted in 4 levels. An adjustable alarm tone warns of errors or exceeding the limit. The adjustable auto-off time of the earth tester prevents accidental battery discharge. The device comes with test leads that meet the specific requirements of CAT III / 6 V and CAT IV / 3V. The earth tester offers a user-friendly interface, clear display elements, and a robust construction to meet the demands in various environments. By complying with international standards, it ensures a safe and reliable assessment of electrical installations according to the highest industry standards. With our optional EVSE test adapters, tests can also be conducted on wall boxes and charging stations for electric vehicles.

The leak detector is used in various areas of industry. For example, the leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals. The working frequency of the leak detector is 4 kHz (± 2 kHz). The soundproof headphones on the leak detector ensure that it can also be used in extremely noisy environments. The leak detector is used wherever gases can escape from leaks in piping systems. The noises caused by the outflow are often in the ultrasonic range and are therefore imperceptible to the human ear. The leak detector picks up this ultrasound via the sonic funnel and converts the inaudible ultrasound into audible frequencies. The laser pointer built into the leak detector enables the leak to be precisely targeted. The leak detector's horn has been designed to be able to pick up sound waves and focus them in such a way that it acts like a directional microphone and suppresses other noise.

The Gas Detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should. Detecting leaks at an early stage can save up to 3% in energy costs. Small leaks in pressurised systems generate ultrasonic sounds that are inaudible to humans. By using an ultrasonic microphone, the gas detector can measure frequencies that exceed the perception limit of human hearing. The gas detector's high-quality measurement electronics convert the recorded ultrasonic sounds into sounds that the user can hear, which the gas detector transmits via Bluetooth or the 3.5 mm jack plug. With this gas detector, the user can document even the smallest leaks, the gas detector can photograph the leak and record a voice memo. The device also provides information on how much compressed air or gas is escaping through the leak. The gas detector therefore enables precise and efficient leak detection and assessment.

Motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 high-power UVA LEDs (385 nm), which together generate a light intensity of 317 μW/cm² at a distance of 3 cm. The automotive tester / stroboscope allows the flash frequency to be set in FPM and Hz. It is small, handy and independent of the mains supply thanks to its rechargeable battery. The automotive tester / stroboscope is operated intuitively using 1 buttons, allowing quick settings to be made. The observation point can be variably shifted using the phase shift. The pulse width can be used to set the duration and therefore also the intensity of the flash frequency. In the settings menu, you can select the display brightness and switch off the display after a period of inactivity, which extends the battery life. The automotive tester / stroboscope is supplied with a USB-C charging cable in a service bag. automotive tester / stroboscopes are indispensable tools for monitoring and inspecting production facilities, e.g. in the printing and textile industries. But also for general maintenance and inspection tasks in all industrial sectors. They also enable non-contact speed and vibration measurement: if the flash frequency of the automotive tester / stroboscope matches the movement frequency, the measured object appears stationary.

The Distance Meter is the ideal tool for precise and simple measurements. With a measurement range of 0.05 ... 40 m and a resolution of 0.001 m, the device provides reliable results for a wide range of applications. Whether in construction planning, interior design or simple DIY work - the Distance Meter impresses with its versatility and ease of use. In addition to simple distance measurement, the Distance Meter can also determine the area and volume of a room. Thanks to the function for indirect distance measurement using the Pythagorean theorem, even hard-to-reach areas can be measured precisely. The device also enables continuous distance measurement as well as the addition and subtraction of distances. Equipped with an LCD, the distance meter is easy to read and operate. The user can choose between different units of measurement (metres, inches, feet) and thus optimally adapt the device to their needs. The automatic power-off function and automatic laser switch-off contribute to energy saving and safety. Thanks to its compact dimensions of 100 x 30 x 17 mm and low weight, the Distance Meter is particularly handy and easy to transport. The integrated lithium polymer battery with a capacity of 200 mAh can be easily recharged. Our Distance Meter has a class II laser with a wavelength of 635 nm and an output of less than 1 mW. This makes it the ideal companion for professional users and DIY enthusiasts when carrying out renovation work, taking quantity surveys or other measurements.

A illuminometer is used wherever a light check is necessary or recommended. The external light sensor of the illuminometer can be positioned according to requirements. The sensor cable has an extended length of approx. 1.5 metres. Different work or production projects require different lighting conditions. These lighting conditions can be created by using different light sources. Below you will find recommendations for lighting conditions in schools, factories or offices. Our illuminometer can show measured values on the display as soon as it is switched on. Various presettings can also be used to activate or deactivate the functions built into the device. These functions include the normal HOLD function, which freezes the measured value in the display. The extreme values and the average value can also be frozen in the display. Other functions of the illuminometer include zero adjustment, automatic switch-off and automatic range selection. Measurements can be taken with the LED luxmeter in lux or food candle. The device is operated using just seven buttons, which enables one-handed operation. Our LED luxmeter is a battery-operated handheld device, making mobile measurements possible. The external sensor of the illuminometer has a large exposure area. It is located on a coiled power cable, which reaches a length of around 1.5 metres when extended. There is a protective cap on the light sensor that protects the sensor from damage and wear. It should always be placed on the sensor if it is not to be used for a longer period of time. The protective cap is also required if a zero adjustment is to be carried out on the LED luxmeter.

The motion analysis of rotating machines is quick and easy with our handheld tachometer. The handheld tachometer is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,73 Lux at 2 cm / 1 Hz. With the handheld tachometer, you can precisely adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.  The intuitive operation of the handheld tachometer is facilitated by the 1 buttons, enabling quick adjustments. The phase shift allows for a variable shift of the observation point. The pulse width controls the duration and, consequently, the intensity of the flash frequency. In the settings menu, you can choose the display brightness and set the display to turn off after a period of inactivity, extending the battery life. The handheld tachometer comes with a USB-C charging cable in a service pouch. The handheld tachometer is an indispensable tool for monitoring and inspecting manufacturing facilities, such as in the printing and textile industries. It is also useful for general maintenance and inspection tasks across all industrial sectors. The handheld tachometer also enables non-contact speed and vibration measurement: If the handheld tachometer flash frequency matches the motion frequency, the observed object appears stationary.

Motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 UVA high-performance LEDs, which together generate a light intensity of 22 μW/cm² at a distance of 3 cm. The automotive tester / stroboscope allows you to set the flash frequency in both FPM and Hz. It is also small, handy and mains-independent thanks to the rechargeable battery. The automotive tester / stroboscope is operated intuitively using the 1 buttons, allowing quick adjustments to be made. The phase shift allows the observation point to be moved variably. The pulse width can be used to set the duration and therefore also the intensity of the flash frequency. The display brightness can be selected in the settings menu and the display can also be switched off after a period of inactivity, which extends the battery life. The automotive tester / stroboscope is supplied with a USB-C charging cable in a service bag. Automotive Tester / Stroboscopes are indispensable tools for monitoring and inspecting production facilities, e.g. in the printing and textile industries. But also for general maintenance and inspection tasks in all industrial sectors. They also enable non-contact speed and vibration measurement: if the flash frequency of the automotive tester / stroboscope matches the movement frequency, the measured object appears stationary.

The benchtop scale allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the benchtop scale dries the material to be weighed, and then calculates the moisture content from the weight difference. The benchtop scale can determine the smallest weight differences thanks to a readability of .1 g. The results are displayed on the large LCD display. Up to 15 different drying programs can be stored in the memory of the benchtop scale. Accordingly, the benchtop scale is suitable for quality control of wood products, granules, pellets, feed, food, pastes and more. With the included 1 g weight, the benchtop scale can be calibrated at any time.

Our Tachometer offers the possibility of precisely recording and analysing fast movements. With a measurement range of 50 to 12000 FPM and a high accuracy of 0.01 %, movements at different velocities can be analysed with high precision. Our Tachometer uses 144 high-performance LEDs to generate short, intense flashes of light that are emitted at regular intervals. These flashes are synchronised with the movement or machine being examined, giving the impression that the movement is frozen or extremely slow. This phenomenon is based on the proven principle of stroboscopy, in which the eye only perceives intermittent images of fast-moving objects through discrete flashes of light. The illuminance is 6270 lux at 12000 FPM and a distance of 20 cm. Measurements are simplified by the auto-scan function which gradually increases the flash frequency to quickly establish synchronisation. For easy adjustment of the flash frequency, our Tachometer offers options in increments of 1 as well as the possibility to double or halve the flash frequency. Depending on your requirements, the flash frequency can be selected in FPM, Hz or m/min. To save energy and extend battery life, it is equipped with an automatic power-off function and an adjustable flash duration of 1 to 250 minutes. Our handy and Tachometer can be used in various fields such as industry, science and research as well as in the music industry. Equipped with a rechargeable 12-volt battery, it offers an operating time of approx. 4 hours.

A Tachometer is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Tachometer can be triggered both internally and externally and supports four external trigger modes. The sensor supply is 12 V and 50 mA with a minimum pulse width of 20 µs. The flash duration varies between 1 and 3 % of the period with a maximum duration of 100 µs. A phase shift of 0 ... 359° can be set and this enables flexible adaptation to different requirements. With an illuminance of 1590 lux at 36,000 FPM and a light source consisting of 20 LEDs, this Tachometer produces intense and clear flashes of light. The 2.4-inch LC display ensures user-friendly operation. In addition, the device can double or halve the frequency of the light flashes (FPM), making quick adjustments possible. The compact dimensions of 150 x 115 x 130 mm allow easy mounting on an aluminium slot profile. Power is supplied via 220 V AC at 50 Hz, which ensures stable and reliable operation. Our Tachometers are used in industry for machine monitoring and quality control, in scientific research for motion analysis and in medicine for special diagnostic procedures. Their reliability, energy efficiency, durability and low heat generation make them a versatile and efficient solution for various applications.

Our extremely powerful Tachometer is unrivalled in terms of light intensity, operation and technology. This very robust and precise hand-held stroboscope is used for measurements in demanding industrial environments and is specially designed for maintenance, commissioning and inspection. The way it works is very simple: fast-moving parts are optically "frozen" and thus made visible to the human eye. In this way, defective components or sub-optimal settings can be detected and corrected during operation. With its large measuring range of 50 to 50,000 FPM, it is versatile and offers precise measurements for a wide range of applications. Its compact size and low weight make it extremely handy and can be taken anywhere. Equipped with 28 energy-saving and long-lasting LEDs as a light source, the Tachometer guarantees reliable performance and a long service life. With a resolution of 0.1 FPM and an accuracy of 0.01%, it delivers extremely precise measurement results that fulfil even the highest demands. It is used, for example, especially for measuring steel and aluminium coils, flat sheets or other rotating objects. In addition, the Tachometer impresses with an appealing illuminance of 2439 lux at 50,000 FPM and a distance of 20 cm. The adjustable phase shift from 0 to 360 degrees enables precise synchronisation with other devices or processes and makes it an extremely versatile tool. The Tachometer has a trigger input for external control and other features such as an ergonomic handle for comfortable handling and a robust metal housing that ensures safe use even in harsh environments. The removable rechargeable battery provides a convenient power supply when travelling, while an additional spare battery extends the operating time.

With its compact size and easy handling, this environmental meter is the ideal measuring device for anyone who wants to take quick light measurements. After removing the cover, the environmental meter delivers reliable results in seconds. With a large measuring range of up to 200 klx or 20 kfc, the luxmeter offers a wide range of applications in different lighting environments. With the min-max hold value display, the environmental meter ensures that the most important values are not overlooked, while the temperature display provides additional information about the measuring environment. The luxmeter has an easy-to-read LC display. Up to 12 measured values can be stored and recalled in the internal memory. The automatic switch-off function prevents uncontrolled battery discharge. The environmental meter switches off automatically after 15 minutes when the lid is open and after one minute of inactivity when the lid is closed. An operating time of up to 60 hours can be achieved with standard AAA batteries.

The PT-1-transducer converts the output signal of a PT1. The PT-1-transducer issues the temperature signal as a 4 ... 2 mA standard signal. This standardized signal enables a simple processing. The PT-1-transducer is characterized by its simplicity. The PT-1-transducer is fed by an electricity loop. A special power supply for the PT-1-transducer is not needed. If you have further questions about the PT-1- transducer , please see the following technical data or use our contact form. Our technicians and engineers will assist you in regards to the PT-1-transducer or any other of PCE Germany GmbH’s products in the fields of control engineering

The environmental meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV screens, negatoscopes, reading boards, etc. e.g. monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested. It is indispensable for checking medical screens and negatoscopes. The unit cd/m² relates the photometric quantity cd (abbreviation for candela) to the area of the display, expressed in square metres. Another feature of the environmental meter is the integrated measured value memory. With this function, measurement results can be easily saved and automatically recorded. The environmental meter creates a text document in which the measured values are stored one after the other. Due to its technical parameters, the environmental meter is classified in class A according to DIN 532-7 and TC-2.2 CIE. The measuring probe is equipped with a multifunction button that can be used to trigger a measurement, save results and set the desired measurement method, e.g. for testing the greyscale reproduction of monitors according to DICOM GSDF 1) function.

The environmental meter is a precise measuring instrument that meets the highest demands for light measurements. In accordance with DIN 532-7, it fulfils the requirements of precision class A, which enables accurate and reliable detection of light intensities. With an impressive measuring range of . lux to 5, lux, the environmental meter is extremely versatile. Whether for lighting control at the workplace, in exhibitions or outdoors - the environmental meter covers a wide range of applications. Accuracy class A not only ensures precise measurements, but also high reproducibility of the results. This is particularly important in applications where accurate light measurements are crucial. The environmental meter has an external sensor and a probe holder that allows measurements to be taken in hard-to-reach places and ensures maximum practicality in various application scenarios. Another feature of the luxmeter is the integrated measured value memory. With this function, measurement results can be easily saved and also automatically recorded. This is particularly useful in situations where the measured values are to be used for later analyses. The environmental meter creates a text document in which the data is stored. With the help of the luminance adapter from our accessories, the environmental meter can be upgraded for surface-mounted measurements or distance measurements with a 1° measuring angle. Overall, the environmental meter offers an unbeatable combination of precision, versatility and user-friendliness. Whether you need to measure light conditions indoors, outdoors or in industrial environments, this environmental meter is the ideal choice for precise and reliable light measurements.

The simulator for light measuring devices is characterised by its precise properties. The light intensity of the simulator is fixed at 1 lux and ensures reliable and precise adjustment of the light sensors. Light measuring devices that are checked and adjusted with the simulator provide reliable measured values under real conditions. Another important feature of the simulator is its defined light colour of 3 Kelvin. This colour temperature of the simulator's light source is adapted to common lighting conditions and therefore enables realistic calibration. The working period of the simulator is 1 minute. This short period of time ensures that the simulator's light source is not subject to unnecessary wear and tear. In addition, the simulator includes an input voltage control to ensure that the simulator is operated under optimal conditions. This function helps to eliminate possible sources of error and ensure the accuracy of the light output. Overall, this simulator is a reliable and precise solution for calibrating light meters, especially the PCE-LMD 2. Its carefully defined features allow the instruments to be precisely adapted to different lighting conditions, ensuring the reliability of light measurements.

The thermometer has a measuring range of -8… +7 ° C. This makes the thermometer suitable for measuring tasks at particularly low temperatures. With the integrated measured value memory for 1728 measured data and the battery, the thermometer can carry out measurements independently and output them to a PC for later analysis. Thanks to its compact design and its metal housing with IP67 protection class, the thermometer can be integrated, for example, during the transport of medical products or other frozen products. This allows the cold chain to be monitored with the thermometer. In order to read out the measurement data, the thermometer must be connected to a PC. From there, the thermometer is recognized as a mass data storage device. The software can now read out the thermometer in order to analyze the measurement data. The measurement data recorded by the thermometer can be exported as XLS, CSV, PDF, TXT and CIN for further processing. The graphic can also be exported as a JPG. At the same time, the thermometer can be set via the software. Among other things, the operator sets the start time, storage interval, the unit and the alarm limits. The thermometer can also be set so that it automatically outputs an exported file of the measurement data. The file formats PDF, DLG, CSV, XLS and TXT are available for selection. This has the particular advantage that the measurement data can be imported directly into a data management system.

The lux warning system consists of a measuring sensor with a handle and a wall bracket with a 1.5 m cable, a light transmitter and a digital display. The main area of ​​application of this lux warning system is in the continuous light measurement and light monitoring of photo laboratories and production rooms (e.g. food or drug production ...). The digital display has a relay output for controlling alarm horns or flashing lights for optical or acoustic warning and a control output. The alarm output limit can be programmed on the display. The analog output signal can also be used to control window flaps ... or the transmitter signals can be stored on a logger, evaluated and documented. The sound warning device is very easy to connect and can be operated via 24 V mains power. The lux warning system was developed for continuous measurement of light intensity. The light transmitter and the digital display have standard dimensions and therefore fit into any control cabinet that has standardized slots. The lux warning system is particularly suitable for monitoring in companies that produce or store light-sensitive materials (e.g. photo laboratories, food production (storage), pharmaceutical production (storage) ... ).

The moisture balance has a moisture measuring range of … 1%. The moisture balance is operated via the 5" touchscreen. To determine the moisture content with the moisture balance, a sample is evenly distributed on the sample pan. The sample pan is then placed in the moisture balance and sealed. After setting all parameters, the moisture balance starts the measurement. The accuracy of the moisture scale is ±.3 g. The moisture balance is therefore a precise measuring device. The moisture balance determines the moisture content via the measured weight difference, based on the weight before and after drying the sample. The adjustable temperature range for the moisture balance is between 4 ... 165 °C / 14 ... 329 °F . A specific drying temperature can thus be selected for the sample in the moisture balance. The drying temperature is generated by means of a built-in halogen lamp with a diameter of 9 mm / 3.5". Due to the drying process of the sample, the moisture balance can be used in many areas. Thus, the moisture balance is used in laboratories, for example, to measure the moisture of different powders, in final quality control to determine the moisture of granules or in agriculture or the agricultural sector to determine the moisture content of oats, grain or wheat. The measured values ​​can be transferred to a PC and analyzed via the RS-232 Modbus interface on the moisture balance. Suitable software is optionally available for the moisture balance. A measurement curve is created in the software for the moisture balance. After a measurement, the measured values ​​can be saved and forwarded by the moisture balance. If required, the moisture balance can be equipped with an optional ISO calibration certificate.

The digital thermometer has a measuring range of -5 ... +5 °C and covers a wide temperature range. With an accuracy of ±2 % ±2 °C at 2 ... 5 °C, the digital thermometer is a very precise measuring device. For better orientation of the measuring spot, a laser pointer is built into the digital thermometer. This laser on the digital thermometer has an output power of <1 mW. The emission value of the digital thermometer is fixed at .95. The digital thermometer is used, for example, for surface temperature testing of electric motors, combustion engines or heat sinks. Thanks to its compact design, the digital thermometer is handy and can be easily stowed away.  To switch on the digital thermometer, press the measuring button. The measurement is then immediately taken by the digital thermometer. When the button is released, the last value remains on the display of the digital thermometer until a new measurement is taken. Optionally, the digital thermometer can be equipped with an ISO calibration certificate.

 The absolute moisture meter has a measuring range of ... 1% absolute humidity. The absolute moisture meter is operated via the 5" large touchscreen. To measure the moisture content with the absolute moisture meter, a sample is evenly distributed on the sample pan. The sample pan is then placed and sealed in the absolute moisture meter. After setting all parameters, the absolute moisture meter begins the measurement. The absolute moisture meter determines the moisture content based on the measured weight difference, relative to the weight before and after drying the sample. The adjustable temperature range for the absolute moisture meter is between 4 ... 165 °C. Thus, a specific drying temperature for the sample can be selected with the absolute moisture meter. The generated drying temperature is produced by a built-in halogen lamp with a diameter of 9 mm. The drying process of the sample makes the absolute moisture meter usable in various fields. Thus, the absolute moisture meter finds its application, for example, in laboratories to measure the moisture of different powders, in quality control to determine the moisture of granules, or on farms to determine the moisture content of oats, grains, or wheat. A major advantage over devices using capacitive measuring methods is that the absolute moisture meter operates independently of characteristic curves and provides more accurate results. The measured values can be transferred to a PC via the Serial RS232 interface of the absolute moisture meter for analysis. A suitable software is available optionally for the absolute moisture meter. If required, the absolute moisture meter can be supplied with an ISO calibration certificate.

This is an oven-drying moisture analyzer for weighing and heating material samples to determine moisture content. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the moisture analyzer or moisture balance dries the sample to be weighed, and then calculates the moisture content from the weight difference. The moisture analyzer can determine the smallest weight differences thanks to a readout, readability or resolution of 1 mg / .1 g / .1 %. The results are displayed on the large, easy-to-read LCD screen. Up to 15 different drying programs can be stored in the memory of the moisture analyzer. Accordingly, the moisture analyzer is suitable for determining the moisture content of everything from food, biomass, pellets, pastes, animal feed, nuts, seeds, beans, lentils and legumes to soil, sand, ceramic clay, resin and brick materials. With the included 1 g weight, the moisture analyzer can be calibrated quickly and easily at any time.

The precision moisture analyzer enables accurate and simple moisture determination in a wide range of materials. The sample is automatically weighed, dried and the weight loss is displayed as moisture content. This measuring principle does not require any time-consuming creation of characteristic curves and is immediately ready for use shortly after installation. For the weighing task, the precision moisture analyzer has an electromagnetic load cell installed which registers the weight loss with a measuring resolution of .1 mg = .1 g. For drying the sample, a moisture analyzer is installed in the sample chamber. To dry the sample, a 4 watt halogen round lamp is installed in the lid to ensure uniform heat distribution. To avoid burning the sample, the user of the moisture analyzer can access the internal product database or set the drying temperature between 35 °C and 16 °C in 1 °C steps, product specific. The product database has preset drying parameters that can be easily expanded and changed by the user.

The PT-1-transducer converts the output signal of a PT1. The PT-1-transducer issues the temperature signal as a 4 ... 2 mA standard signal. This standardized signal enables a simple processing. The PT-1-transducer is characterized by its simplicity. The PT-1-transducer is fed by an electricity loop. A special power supply for the PT-1-transducer is not needed. If you have further questions about the PT-1- transducer , please see the following technical data or use our contact form. Our technicians and engineers will assist you in regards to the PT-1-transducer or any other of PCE Germany GmbH’s products in the fields of control engineering

The melt index tester from PCE Instruments is used for rapid testing of the melt mass flow rate of plastics. The melt index tester is designed for incoming goods inspection as well as for continuous production monitoring. Due to the clear presentation of all relevant parameters on the 7 "touch display, the measurement results can be determined in a short time with the help of the melt index tester. The automatic cutting function also contributes to the high reproducibility of the melt flow index test carried out with this device. The already stored standard plastic materials save the user of the melt index tester tedious configuration processes; these include: PS, PP, PE, ABS, PC, PMMA and many more. In addition to the already integrated standard plastics, the test temperatures and test weights are stored in the melt index tester in compliance with the standard (ISO 1133). Non-stored materials with material-specific parameters can be permanently added and saved in the melt index tester at any time. Melt Flow Tester in application in the plastic production.The melt index tester is therefore ideal for determining the melt flow index, which provides the information about the flow behaviour or the viscosity of the plastic materials at different temperatures and pressures. During this test in compliance with ISO 1133, the mostly granular sample is placed in a preheated cylinder and heated at a material-specific temperature. A piston with a defined mass, due to its own weight, afterwards presses the liquid melt through a nozzle with a defined diameter. After a specified period of time, the measurement on the melt index tester is stopped and the mass, that has been flowing through the nozzle, is determined by means of the analytical balances, as a result the mass / time value (g / 10min) is obtained, which is also referred to as the MFI value. The melt flow index is determined in order to examine and study the flow behaviour of thermoplastics. Due to the flow behaviour, the degree of polymerization can be derived, which on the other hand has an influence on the later mechanical properties of the molded plastic. Since plastics are sometimes sensitive to moisture, the increased moisture in the granules during the melting process during injection molding can lead to the shortened molecular chains and thus to poorer mechanical properties. It is therefore necessary to dry the granules to a suitable level of moisture before injection molding in order to avoid later quality losses on the finished product. The melt index tester from PCE Instruments is therefore a very suitable tool for determining the melt mass flow rate for a wide variety of thermoplastic materials. In this way, even before the production, the important parameters for the subsequent manufacturing can be determined and adjusted if necessary. Thus, the melt index tester contributes to quality improvement in the production process, reduces the reject rate and thus contributes to a sustainable cost reduction.

The power indicator measures current up to 63 A directly. This makes it possible to connect the power indicator directly to the main distribution. The power indicator measures all relevant network parameters such as current, voltage, power and frequency. The power indicator is ideally suited for measurement purposes in order to comply with the ISO 51 energy management standard.

The infrared temperature meter has a measuring range of -5 ... +76 °C and thus covers a wide temperature range. With an accuracy of ±2 % ±2 °C at 2 ... 76 °C, the infrared temperature measuring device is a very precise measuring instrument. For better orientation of the measuring spot, two lasers are built into the infrared temperature measuring device. Both lasers have an output power of <1 mW. In order to determine different surfaces with the infrared temperature measuring device, the emission value can be set between .1 ... 1.. With the limit value alarm function on the infrared temperature measuring device, a minimum temperature and a maximum temperature can be set individually. If the set limit value is exceeded or undershot during a measurement with the infrared temperature measuring device. This is immediately signalled acoustically and visually by the infrared temperature measuring device.  To switch on the infrared temperature measuring device, the measuring button must be pressed. The measurement is then immediately taken by the infrared temperature measuring device. If the button is released, the last value remains on the display of the infrared temperature measuring device until a new measurement is carried out. Optionally, the infrared temperature measuring device can be equipped with an ISO calibration certificate.

The sound dosimeter (badge type) was specially developed for measuring noise exposure in workplaces and complies with the IEC 61252:22 standard. With a measuring range of 7 … 14 dB and a frequency weighting of A, B and Z, the noise dose meter is ideal for this. The time weighting on the noise dose meter can be selected between fast, slow and impulse. With the built-in 47 mAh battery, the sound dosimeter has a runtime of >15 hours. Up to three virtual noise dose meters can be set in a noise dose meter (badge type). This has the advantage that up to three measurement standards can measure simultaneously. The display of the sound dosimeter shows up to 14 measurement windows that can be set individually. The data transfer from the sound dosimeter (badge type) to a PC takes place directly via the charging station. The recorded measurement data can be read out and analyzed with the software for the noise dose meter. In addition, all settings for the noise dose meter can be made via the software. Another special feature of the sound dosimeter is that the charging stations can be coupled with each other. This has the advantage that several noise dose meters can be charged via one power pack. Up to four sound dosimeters can be charged simultaneously per power supply. For optimal support and positioning, the sound dosimeter (badge type) is attached to the work clothing of the respective employee with two crocodile clips. The distance between hearing and the noise dose meter should be between 1 and 15 cm (3.9 and 5.9").

The PT-1-transducer converts the output signal of a PT1. The PT-1-transducer issues the temperature signal as a 4 ... 2 mA standard signal. This standardized signal enables a simple processing. The PT-1-transducer is characterized by its simplicity. The PT-1-transducer is fed by an electricity loop. A special power supply for the PT-1-transducer is not needed. If you have further questions about the PT-1- transducer , please see the following technical data or use our contact form. Our technicians and engineers will assist you in regards to the PT-1-transducer or any other of PCE Germany GmbH’s products in the fields of control engineering

The Voltmeter was developed to simplify on-site troubleshooting in both industrial systems and solar systems. With selectable test voltages from 250 ... 2500 V and resistance measurement up to 200 GΩ, this device allows multiple operations to be carried out with just one tool. The intuitive user interface, short-circuit current of up to 1.8 mA and CAT IV 600 V safety make these portable high-voltage Voltmeters ideal for quick and stable resistance measurements anywhere. The test voltage can be variably selected from 250 V, 500 V, 1000 V, 2000 V and 2500 V. It can also measure AC and DC voltages from 10 ... 600 V. The Voltmeter has a memory for 100 data records which can be called up via the LC display. In addition to the data hold function, the Voltmeter offers the option of measuring the polarisation index (PI) and the dielectric absorption ratio (DAR). These functions are particularly useful for condition monitoring and maintenance of electrical insulation, as they help to detect potential problems at an early stage and extend the service life of the equipment. A high-voltage indicator ensures safety during operation and a low-battery indicator indicates in good time that the battery needs to be replaced. The device is particularly suitable for measuring insulation resistance on various electrical devices and insulating materials such as motors, cables, switches and other electrical components, making it ideal for maintenance, repair and testing work. With its modern design and stable performance, the device is impressive in every respect. The Voltmeter is supplied in a practical zip bag for easy storage and transport.

This Milliohmmeter is supplied with a large 3½ positions LCD display that shows the measurement values, which is very easy to read. With the Milliohmmeter you will be able to measure electric resistance from 1 μΩ to 2 Ω.To obtain measurement values, a constant electric current is introduced inside an object to test the voltage drop in it. Milliohmmeter has a housing protected against water splash and also it is delivered calibrated. If you wish, an ISO calibration certificate can be requested.

The indicator is used to realize individual weighing solutions. Load cells, force sensors, weighing platforms and other sensors that use strain gauges can be connected to the indicator. This makes the indicator a versatile measuring instrument for weight, force, torque, etc. The indicator has a measuring input to which the sensors can be connected in 4 or 6-wire technology. The menu can be used to perform an exact calibration / adjustment from the indicator. The indicator has many rear connections. Thus, the 4 NO relays and the potential-free digital input are connected here on the indicator. The outputs can be used to trigger different processes. The digital input is used to tare the indicator or to set the display to 0. In addition to these functions, the indicator can be deleted via the interface. The analogue output is used to pass on the displayed value directly from the indicator.

The milliohmmeter is a compact and precise measuring device with 5 selectable scale ranges for measuring resistances in the range from 0 mΩ . .. 2000 Ω. The use of the 4-wire measuring method enables a precise current flow through the measurement object while simultaneously measuring the voltage across it. Separate connections for current and voltage minimise errors and enable accurate resistance measurements. Equipped with an integrated fuse (200 mA/600 V) and three test currents, it offers reliable protection and flexibility. The milliohmmeter complies with the CAT III 300V safety standard. The device has an internal memory that can store a maximum of 200 values, which can also be recalled via the display. In addition, the MAX/MIN/HOLD functions allow important values to be displayed. The milliohmmeter has a 5.1 inch LC display with backlighting. The robust housing (protection class IP65 with closed cover) enables use in harsh conditions, and the low battery indicator ensures the reliability of the device. The milliohmmeter is a compact measuring device for precise resistance measurements in various industries.

The electrical tester with seven selectable measuring ranges from 0 µΩ to 200 Ω, a maximum resolution of 0.1 µΩ and a maximum test current of 10 A offers a wide range of applications. Thanks to the 4-wire measuring method, the electrical tester guarantees accurate measurements at the smallest resistances without the influence of the lead resistance. It can therefore be used for a wide range of applications, e.g. to detect poor contact between two measuring points, measurements on switches, continuity of earth connections or for testing metal coatings. The illuminated LC display of the electrical tester makes it easy to read the measurement results, even in unfavourable lighting conditions. With an internal memory for up to 200 measured values and a low battery indicator, the device offers additional user-friendliness and makes the electrical tester an indispensable tool for preventive maintenance. The data can be transferred to the software via the optical RS232 interface and a text document with the measurement data can also be exported. The practical case and a bag for the test leads make it easy to transport the measuring device.

Meter accumulator operated / extensive LCD / polycarbonate ABS casing /  EN 611-1 The ohm meter is made to measure smallest electrical resistances. It uses four test cables that can be connected to the ohm meter. The ohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device. The other two test cables measure the voltage drop. Due to the fact that this ohm meter is able to measure six different measurement ranges with three different measured currents, the user has the chance to observe a wide range of current.  The ohm meter is mostly used in those fields where resistance need to be estimated. Because of the measured current which can be set up to 1 A, also the smallest resistances can be measured. The wide LCD and large buttons of this ohm meter allow a comfortable use. 

The particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the particle counter determines the mass concentration of PM2.5 and PM1 in the measuring range … 1 µg/m³. In addition, the temperature and the ambient humidity are measured. With the alarm limit function, limit values ​​for PM2.5 can be set on the particle counter. During a measurement it is possible to record the measured values ​​with the particle counter. A memory with a storage capacity of approx. 12 measurement runs, each with 999 measurement points, is available for the particle counter. The interval can be set at different times on the particle counter. The 8 Wh battery can be charged via the micro USB interface. The battery used in the particle counter enables an operating time of approx. 9 hours. Thus, the particle counter can carry out measurements over an entire working day before it has to be recharged. Since the battery is not permanently installed in the particle counter, it can be easily replaced.

The particle counter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the particle counter determines the mass concentration of PM2.5 and PM1 in the measuring range … 1 µg/m³. In addition, the temperature and the ambient humidity are measured. With the alarm limit function, limit values ​​for PM2.5 can be set on the particle counter. During a measurement it is possible to record the measured values ​​with the particle counter. A memory with a storage capacity of approx. 12 measurement runs, each with 999 measurement points, is available for the particle counter. The interval can be set at different times on the particle counter. After recording, the measurement data recorded by the particle counter can be transferred to a computer. The particle counter is connected to any computer via the micro USB interface to transmit the measurement data. Since the particle counter is recognized as a mass data storage device by the computer, the particle counter is independent of the operating system. The measurement data saved by the particle counter are saved in PDF. In addition to data transfer, the 8 Wh battery can also be charged via the micro USB interface. The battery used in the particle counter enables an operating time of approx. 9 hours. Thus, the particle counter can carry out measurements over an entire working day before it has to be recharged. Since the battery is not permanently installed in the particle counter, it can be easily replaced.

The mini magnetic stirrer is suitable for applications in small laboratories. The mini magnetic stirrer can safely mix stirring quantities of 100 ... 1000 ml. Vessels with a diameter of up to 88 mm can be placed on the stirring surface of the mini magnetic stirrer PCE-MSR 50. So the magnetic stirrer can be used for all common beakers. The magnetic stirrer is supplied with an external 5 V mains adapter. Due to its small size and weight, the mini magnetic stirrer can also be used in mobile field surveys.

The panel meter is suitable for panel mounting. This panel meter can be used to show the weight, force or torque. The decisive factor here is the type of sensor that is connected to the panel meter. The calibration of the panel meter to the respective measuring cell is made via the menu with the aid of exact calibration weights. The panel meter is used for stationary and individual weighing solutions. Often the panel meter is used where the weight has to be determined continuously. The display of the panel meter device is a graphic display, which shows not only the numerical measured value but also the course of the weighing process. The panel meter also displays the minimum and maximum weighing values. Using the keys, the panel meter can be tared or set to zero. In addition to the operation via the keys, the panel meter can be operated via the rear-side digital inputs. So external buttons can be connected, which tare the force display device etc.

A handheld stroboscope or strobe tachometer with trigger functionality. This easy-to-use portable digital stroboscope gun features high / low range selection and push-button rate control to scale the flash rate slower (x½) and faster (x2). In addition, two knobs allow coarse and fine adjustment of the flash rate. When the speed of a moving object matches the flash rate of the strobe, the moving object appears to be standing still. With a slight adjustment, movement can be viewed in apparent slow motion. Slow motion makes it easier to visually inspect the process in action. However, these visual illusions can be disorienting. Take necessary safety precautions to avoid accidental contact with moving objects.

The PT-1-transducer converts the output signal of a PT1. The PT-1-transducer issues the temperature signal as a 4 ... 2 mA standard signal. This standardized signal enables a simple processing. The PT-1-transducer is characterized by its simplicity. The PT-1-transducer is fed by an electricity loop. A special power supply for the PT-1-transducer is not needed. If you have further questions about the PT-1- transducer , please see the following technical data or use our contact form. Our technicians and engineers will assist you in regards to the PT-1-transducer or any other of PCE Germany GmbH’s products in the fields of control engineering

The relative humidity meter can be used to monitor air humidity and temperature in HVAC engineering. The relative humidity meter releases the measured indicator as a standard signal …1 V (not galvanic isolated). Air humidity and temperature are detected accurately due to a semiconductor. For operation the relative humidity meter is supplied via direct current. The measuring data is then shown via a two-wire line. All connections are made via screwed-contacts with water-proof IP 65 enclosure. Aside from displaying the signal as a …1 V signal the measuring data can also be read through a RS485 interface. This feature is especially useful if different measuring points are to be connected during your building monitoring. For further information about the relative humidity meter please read the following technical data or use our contact form. Our engineers and technicians will gladly advise you regarding the relative humidity meter PCE-P18-3 or any other of PCE Instruments product in the areas of regulation and control or scales and balances.

The relative humidity meter can be used to monitor air humidity and temperature in HVAC engineering. The relative humidity meter releases the measured indicator as a standard signal …1 V (not galvanic isolated). Air humidity and temperature are detected accurately due to a semiconductor. For operation the relative humidity meter is supplied via direct current. The measuring data is then shown via a two-wire line. All connections are made via screwed-contacts with water-proof IP 65 enclosure. Aside from displaying the signal as a …1 V signal the measuring data can also be read through a RS485 interface. This feature is especially useful if different measuring points are to be connected during your building monitoring. For further information about the relative humidity meter please read the following technical data or use our contact form. Our engineers and technicians will gladly advise you regarding the relative humidity meter PCE-P18-3 or any other of PCE Instruments product in the areas of regulation and control or scales and balances.

/ The humidity sensor was developed and constructed for the permanent monitoring of temperature or humidity. The compact dimensions of the humidity sensor are the characteristics of this instrument. The measurement of the temperature and humidity is via a semiconductor component. Internally, the physical quantities to be measured are converted toa 4 ... 2 mA standard signal. The power of this measuring instrument isconnected to a DC voltage into a current loop and is thus ideally suited fordisplayswith transmitter power supply. But it can also be connected to the paperless recorder for long-term monitoring of environmentalconditions.

The panel meter is a compact instrument for measuring and displaying various network parameters in three-phase networks. This panel meter can record the energy values of individual consumers or electrical feeders. In addition to the voltages and currents, the apparent, reactive and active power as well as the active and reactive energy are measured and shown on the 68 x 55 mm display. Furthermore, an RS485 interface is integrated into this panel meter, which enables integration into existing systems. The RS485 interface communicates using the Modbus RTU protocol. This makes it possible to read out measured values from the panel meter or to read and change device settings. The panel meter is designed for panel mounting with a cut-out of 96x96 mm. The scope of delivery includes a transparent door that can be attached to the front to protect the device against dust and moisture. In addition to the many measuring functions, the panel meter offers alarm functions. A stable power supply is a top priority for every network operator. To avoid fluctuations in power quality and faults, grid monitoring, control and automation must be adapted and optimised.

The Power Indicator measures current and voltage values using the connected current transformers and test leads. From this, the active, apparent and reactive power are determined and transmitted to the measuring platform every second via Wi-Fi. The data is then filed historically on the Power Indicator, processed graphically and can be analysed or exported. The measurement with the Power Indicator is carried out using Rogowski coils or folding current transformers. Alternatively (if no internet connection is available), the data can be recorded in the built-in 32 GB flash memory in the form of a CSV file for further processing at a later date. An SD card adaptor is also available as an accessory, which means that the recording duration is more than one year, even when recording to the second. It is also possible to send the CSV files periodically by e-mail, upload them to a server via FTP or transfer them to the measurement platform once the measurement has been completed. Interaction with the Power Indicator is mainly via Wi-Fi and web browser or via app (BLE). Power is supplied and measured via magnetic measuring tips and connection terminals or probes. The Power Indicator can be connected into any main and sub-distribution board as well as into devices and systems - the power supply does not have to be interrupted. Managing the power supply is the top priority. Without measuring consumption and recording instrumental values such as current, voltage, frequency and power, it is virtually impossible to improve efficiency. The Power Indicator makes it possible to monitor the entire energy consumption and helps to reduce energy costs.

This pH Meter is a portable, easy-to-use measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Multifunction pH Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water. Three-point calibration and automatic temperature compensation guarantee a high level of accuracy even with variable temperature measurements. The pH meter is supplied with both a pH electrode and a temperature sensor. Additional electrodes are available for purchase separately, as is an optional mains adapter for power and a software kit with an RS-232 cable. The pH meter acts as a real-time data logger. All values can be stored directly on the included SD card in Microsoft Excel format or transferred to a PC by means of the RS-232 port. Thus, no additional software is required for evaluation of the data.

The Power Indicator measures current and voltage values using the connected current transformers and test leads. From this, the active, apparent and reactive power are determined and transmitted to the measuring platform every second via Wi-Fi. The data is then filed historically on the Power Indicator, processed graphically and can be analysed or exported. The measurement with the Power Indicator is carried out using Rogowski coils or folding current transformers. Alternatively (if no internet connection is available), the data can be recorded in the built-in 32 GB flash memory in the form of a CSV file for further processing at a later date. An SD card adaptor is also available as an accessory, which means that the recording duration is more than one year, even when recording to the second. It is also possible to send the CSV files periodically by e-mail, upload them to a server via FTP or transfer them to the measurement platform once the measurement has been completed. Interaction with the Power Indicator is mainly via Wi-Fi and web browser or via app (BLE). Power is supplied and measured via magnetic measuring tips and connection terminals or probes. The Power Indicator can be connected into any main and sub-distribution board as well as into devices and systems - the power supply does not have to be interrupted. Managing the power supply is the top priority. Without measuring consumption and recording instrumental values such as current, voltage, frequency and power, it is virtually impossible to improve efficiency. The Power Indicator makes it possible to monitor the entire energy consumption and helps to reduce energy costs.

The Power Indicator measures current and voltage values using the connected current transformers and test leads. From this, the active, apparent and reactive power are determined and transmitted to the measuring platform every second via Wi-Fi. The data is then filed historically on the Power Indicator, processed graphically and can be analysed or exported. The measurement with the Power Indicator is carried out using Rogowski coils or folding current transformers. Alternatively (if no internet connection is available), the data can be recorded in the built-in 32 GB flash memory in the form of a CSV file for further processing at a later date. An SD card adaptor is also available as an accessory, which means that the recording duration is more than one year, even when recording to the second. It is also possible to send the CSV files periodically by e-mail, upload them to a server via FTP or transfer them to the measurement platform once the measurement has been completed. Interaction with the Power Indicator is mainly via Wi-Fi and web browser or via app (BLE). Power is supplied and measured via magnetic measuring tips and connection terminals or probes. The Power Indicator can be connected into any main and sub-distribution board as well as into devices and systems - the power supply does not have to be interrupted. Managing the power supply is the top priority. Without measuring consumption and recording instrumental values such as current, voltage, frequency and power, it is virtually impossible to improve efficiency. The Power Indicator makes it possible to monitor the entire energy consumption and helps to reduce energy costs.

The power meter is a tabletop device for measuring effective power, apparent power, power factor, energy consumption, current, continuous voltage, resistance and frequency. The power meter also offers the possibility to connect industrial current converters with a transmission relation of 1/5A or 1/5A. Its large 93 x 52mm LCD is easy to read and provides a variety of results, including Watts, cos φ, ACV and ACA. With the optional PCE-PA ADP current adaptor with ground wire (up to 1ACA) it can safely and quickly measure and analyse with the help of the power meter. Measurement of current and power can be done directly with test cables that come with the device or indirectly using the clamps. The device has an RS-232 interface, and software* to analyse results and transfer data to a computer. This makes it the ideal device for any workshop or for measuring power to determine faults in devices. *Soft-lut-usb software is available in the accessories tab   

The clamp meter is a useful tool for precisely recording various electrical parameters. With a measuring range of 0 to 600 V for AC voltage and 0 to 1000 A for AC current, it offers sufficient flexibility for various applications. In addition to measuring active power, power factor, active energy and frequency, the clamp meter also allows you to monitor power consumption and the associated costs. With its compact dimensions of 220 x 195 x 105 mm, it is handy and easy to use. The device's internal memory can store up to 2000 data records, which can be conveniently called up via the LC display. To transfer the data to a PC, however, it is necessary to install the supplied software, which enables both tabular and graphical visualisation of the data. The data can also be exported to a text document. Continuous data recording, which can be started via the clamp meter, takes place at intervals of one second until the memory is full. This memory can only be called up in the device. In addition, alarm functions can be set for upper and lower limit values for the measured power, AC voltage and AC current. The integrated "cost function" allows the operator to set a cost factor to display the total cost of consumption. In addition, a weight factor can also be set to determine gas consumption, for example. All in all, the clamp meter offers a wide range of applications and functionality for measuring and controlling electricity and energy consumption.

The electrical tester is designed for accurate measurement and analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring voltage, current, active power, power factor, frequency, and energy consumption in kWh. In addition to the color display, the electrical tester has additional input jacks for measurements up to 2 A. The measurement range of .1 ... 5 W allows power measurement for many consumers in industry and crafts. The electrical tester has a current measurement range of .1 ... 2 A AC with a resolution of 1 mA.  In the settings of the electrical tester, an alarm value can be set for the power and current value, which gives an audible warning when exceeded. The electrical tester comes with 4 safety measurement cables, and the measurement jacks are also protected against electric shock to enable the operator to measure safely. The power meter can be used in the laboratory on the table as well as in industrial environments, thanks to the adjustable stand bracket.

Multifunction Conductivity Meter is a portable, easy-to-use measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Multifunction Conductivity Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.   Temperature compensation guarantee a high level of accuracy even with variable temperature measurements. PCE-PHD 1-R is supplied with a redox electrode. Additional electrodes are available for purchase separately, as is an optional mains adapter for power and a software kit with an RS-232 cable. PCE-PHD 1-LF acts as a real-time data logger. All values can be stored directly on the included SD card in Microsoft Excel format or transferred to a PC by means of the RS-232 port. Thus, no additional software is required for evaluation of the data. 

The clamp meter redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp meter allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.The graphical representation of waveforms and vector graphics allows users to visually capture and analyze electrical signals. These features provide insights into the quality of electrical power and aid in identifying issues in the network. The device can also detect and display sags, surges, or flickers in the power supply network. The broad measurement range or desired selection allows the integrated data logger with generous 8 GB storage to store and archive extensive measurement data for later analysis. This ensures continuous data capture that can also be scheduled. The clamp meter is equipped with LAN and USB interfaces, enabling convenient data transfer and remote control. These interfaces offer seamless integration of the clamp meter into existing networks and systems. The included flexible current clamps with a capacity of up to 3 A facilitate the measurement of high currents and provide accurate results, even in challenging applications.The clamp meter complies with international standards (IEC61-4-3, 61-4-15, 61-4-7, EN516), ensuring the quality and accuracy of measurements and ensuring that it meets the demanding requirements of professional applications. Whether testing operational characteristics of transformers, lighting systems, or switching electronics such as frequency converters or power supplies – our clamp meters guarantee the highest accuracy and are capable of precisely analyzing even complex signal waveforms.

The clamp meter redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp meter allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.The graphical representation of waveforms and vector graphics allows users to visually capture and analyze electrical signals. These features provide insights into the quality of electrical power and aid in identifying issues in the network. The device can also detect and display sags, surges, or flickers in the power supply network. The broad measurement range or desired selection allows the integrated data logger with generous 8 GB storage to store and archive extensive measurement data for later analysis. This ensures continuous data capture that can also be scheduled. The clamp meter is equipped with LAN and USB interfaces, enabling convenient data transfer and remote control. These interfaces offer seamless integration of the clamp meter into existing networks and systems. The included flexible current clamps with a capacity of up to 3 A facilitate the measurement of high currents and provide accurate results, even in challenging applications.The clamp meter complies with international standards (IEC61-4-3, 61-4-15, 61-4-7, EN516), ensuring the quality and accuracy of measurements and ensuring that it meets the demanding requirements of professional applications. Whether testing operational characteristics of transformers, lighting systems, or switching electronics such as frequency converters or power supplies – our clamp meters guarantee the highest accuracy and are capable of precisely analyzing even complex signal waveforms.

The digital thermometer allows for quick temperature checks. It is also lightweight and ergonomically designed to make taking measurements as comfortable as possible. The temperature sensor of the probe thermometer is made of stainless steel and is ideal for food use. An LED is located parallel to the sensor, allowing measurements to be taken with the digital thermometer even in dark conditions. When the probe is extended, the device turns on automatically. The measuring electronics of the probe thermometer are well protected in an ABS housing, and the protection class of the probe thermometer is IP54. The display of the probe thermometer rotates depending on the orientation of the device, allowing the readings to be read comfortably. If the thermometer is not in use, the device turns off after 90 seconds.

36° rotating head with adjustable eye relief / Diopteradjustment / LC display The digital microscope impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and great reliability, the digital microscope is particularly well suited to be used in advanced teaching facilities as well as in laboratories. The tripod from the digital microscope consists of the light yet strong material, aluminum, and is modern and ergonomically shaped. The eyepieces are very user-friendly, since both the diopter and the eye relief can be adjusted. This makes it easy for people who wear glasses to work with the digital microscope. There is also a rheostat on the side of our digital microscope with which the brightness can be easily adjusted. The LED light from the digital microscope is very durable and requires little maintenance. The color temperature is similar to that of sunlight, so an examination under the digital microscope is possible that is comparable to that under daylight.  The LCD screen built on the 3rd eyepiece enables viewing of the specimen through the eyepieces and simultaneously on the screen. This allows e.g. when used in schools, the teacher to quickly check the settings and the preparation. As a further option, the screen offers an output option to an external imaging device such as a large screen or projector.

The barometric pressure meter has a measuring range of -3 ... 6°C / -22 ... 14°F and can be used in cold environments. In addition to temperature and humidity measurement, the barometric pressure meter can also measure the absolute air pressure in the ambient atmosphere in a measuring range between 7 ... 11 hpa. Due to the different sensors, the barometric pressure meter already covers a wide range of measuring tasks. Typical applications of the barometric pressure meter are, for example, the monitoring of refrigeration facilities, greenhouses or also in the monitoring of an office workplace.  The measured values are stored on the internal memory of the barometric pressure meter . The barometric pressure meter has a memory capacity of 1334 measuring points. Once a measurement run has been completed, the stored measurement data can be read out from the barometric pressure meter independently of the operating system. This is possible because the barometric pressure meter is recognised as a mass data memory. When storing the measurement data, the measurement points are saved in a .pdf and in a .csv file. With the corresponding software for the barometric pressure meter , the measured values can be displayed graphically. In addition, settings for the barometric pressure meter can be made via the software. For example, the storage interval can be set between 1 minute and 24 hours, visual alarm limits and start/stop pulses can be set for the barometric pressure meter . Optionally, the barometric pressure meter can be equipped with an ISO calibration certificate.

The humidity detector was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the humidity detector ensures high efficiency. The humidity detector performs a resistance moisture detection. This means that the humidity detector measures the resistance of the test sample in order to gain information about its moisture due to its characteristic curve. Therefore it is of great importance to select the appropriate characteristic curve and temperature of the humidity detector. The humidity detector is applicable for comparative measurements of pellets that are made of either sawdust, wood chips, straw, hay, scraps of pellets, shells of sunflowers, buckwheat, corn, soy, etc. Therefore, simply plunge the 1 mm long sensor into the pile of pellets and the measuring data will be collected after its stabilization. The humidity detector only measures at the tip of its sensor-probe. It is advised to perform several measurements at different points in order to achieve an adequate overview of the water content of the pile. Thus the humidity detector helps providing quick, easy and low-cost information about pellets moisture.

The PCE-PFG force measuring device is a handy, digital measuring device for measuring tensile and compressive forces. The force measuring device offers a sampling rate of 5 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 1 measurements. The measurement data and a statistical evaluation of the data stored in the force measuring device (MIN / MAX / average) are shown on the graphic display and can be transferred to a PC via the USB interface. In addition, the force measuring device offers a limit value function MIN / MAX, which can switch a multi-colored LED (yellow / green / red) and switching contacts. The graphic display can be rotated and the force measuring device can be securely attached to a test stand using the M4 threaded holes on the back. The force is introduced into the internally installed load cell via an M6 threaded rod. Various mounting pieces are included in the scope of delivery of the force measuring device. The force measuring device can be operated continuously for up to 36 hours on a single charge (without background lighting) and is a reliable partner as a mobile force measuring device.  

The parcel scale is a very precise measuring device for determining weights due to the resolution of 1 g and an accuracy of ± .1% of measuring range. The display units available on the parcel scale are lb / oz, kg / g, kg, g, lb, oz. The illuminated LC display of the parcel scale is sized in such a way that the measured value can be read easily even in very bright ambient conditions. In addition, the display of the parcel scale can be removed and can be positioned freely because of the spiral cable. With the piece counting function, the parcel scale can determine the number of objects, such as screws. For this purpose, a reference measurement is first carried out on the parcel scale. The piece counting function is then started by pressing a button. As an extension of the piece counting function, the weighing surface of the parcel scale can be opened to the side. In this way, for example, stacked envelopes or similar can be weighed with the parcel scale without them falling off the weighing surface. The parcel scale is supplied with power via a 6 V DC mains power adapter. In addition, the parcel scale can be operated with three 1.5 V batteries. This means that the parcel scale can be used both stationary and mobile. The automatic switch-off ensures that the parcel scale switches itself off within 5 minutes of inactivity. PCE Instruments optionally offers an ISO calibration certificate for the parcel scale.

The advanced environmental meter stands for precision, user-friendliness, and GLP compliance (Good Laboratory Practice). With a high-resolution LCD display, the environmental meter provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors.  A Permanent Measurement Verification (PMV) indicates to the operator, using a color bar, where the measurement value is located within the calibration range, providing insight into whether the measurement is in the correct range.The graphically guided calibration makes the process simple and user-friendly. User and sample management enable easy navigation and adjustment of measurement parameters on the environmental meter. Sample information can be stored to facilitate the management and identification of measurements. A generous internal data storage saves extensive records without the need for external storage. The USB-C port on the environmental meter ensures fast data transfer and charging. A powerful LiPo battery allows hours of measurements before needing to be recharged.  Overall, this environmental meter represents a significant step in the development of handheld and laboratory instruments. The high accuracy of ± .2 pH + 2 Digits, graphically guided calibration, GLP compliance, user and sample management, and data storage make it an indispensable tool for scientists, researchers, and laboratory technicians relying on precise pH measurements. It not only enhances the accuracy and efficiency of experiments but also streamlines daily work in industry, quality assurance, and the laboratory.

The redox meter is the optimal tool for checking the most important water parameters. The portable redox meter is used to control pH and conductivity. It also serves for simultaneous temperature measurement. Furthermore, the redox meter can be used to measure the redox potential.  A three-point calibration and automatic temperature compensation up to 9°C / 194°F guarantee high accuracy even with fluctuating measuring temperatures. The redox meter has an easily readable display. The test device is delivered including a redox probe, calibration and storage liquid.

The pH meter was developed to directly determine the pH in aqueous media or water based solutions. The waterproof pH tester PCE-PH2 is used for the fast and accurate measurement of pH. The practical display makes the pH value on the pH meter easy to read. Due to the waterproof and robust housing (IP 67), the pH value tester can also be used under difficult conditions. A recalibration always guarantees optimum accuracy and is very easy to perform using the optionally available calibration kits (automatic calibration function without calibration screws - to be performed only via the keyboard). Water quality in aquariums is extremely important for the living organisms that inhabit it. Slight changes in pH level and temperature may lead to aggravating results and even death of the fishes or reptiles in the water tank. Therefore, application of the appropriate pH meter is required. The ecosystem in the aquarium must be as much similar to the natural conditions as possible. So, the measurements should be regular and provide accurate result. Depending on the purpose of creating an aquarium, commercial, scientific (experimental and laboratory tests), decorative, the most desirable pH level should be maintained to provide correct living conditions for the fishes and other possible organisms there. Modern devices are often portable and easy-to-use instruments which help to monitor the changes in the pH level during the day or from day to day etc. The glass electrodes have long service life and due to a high level of precision and wide measurement range, it is possible to apply the meter often and detect the slightest deviations. For this type of measurements, the presence of the temperature sensor is very important, since the temperature change may occur within one aquarium, and it should be detected at once. Not depending on the purpose, the aquarium is supposed to fulfil the main task of its own is to create the best conditions and the most favourable medium. This task may be a bit more challenging that it seems to be, because just filling-in the tank with fresh water is not enough and much depends on the parameters which the water has and how they may change with the time. Depending of the fish type, there may be slightly different requirements to the pH level of water (from 6 to 8, in average, but there may be exceptions). A very influential factor is also the type of water the owner decides to choose for the aquarium. Fresh and salty water have different desirable pH levels and it is important to take into consideration. As a rule, salty water has a higher pH value than fresh (8 and more). Before choosing the inhabitants for the aquarium, it is necessary to learn more about their natural habitat, because the conditions in aquarium should be maximally adjusted to the natural ones. The level of pH in aquarium should eb maintained on the desirable level. The growth of pH may have a destructive influence, since the growing ammonia deteriorates the water quality and may be very harmful to the fishes. That is why, pH level control in aquarium is practically a daily task, if your intention is to have a beautiful water tank with healthy inhabitants. Fishes are very sensitive to the fluctuation of pH, especially if the values are much different from the natural and usual ones for them. pH tester allows the user for checking the current pH level within just a few seconds and make the changes immediately if the deviation happens.

The environmental meter with a measuring range of -2… 20 pH is used to analyze liquid samples. Thus, the water quality of swimming pools, lakes or rivers can be determined with the environmental meter. A 3-point calibration can be carried out on the environmental meter so that the measurement result is as accurate as possible. In addition, an automatic temperature compensation is carried out for each measurement. In order to operate the environmental meter, it must be connected to an Android capable device. The corresponding app for the environmental meter can be downloaded free of charge from the Play Store. The measured values ​​are displayed and saved with the app for the environmental meter. After the measurement data have been saved, a PDF report can be generated via the app.

The pH process controller values ​​for the 2-point control are programmed via the buttons of the pH controller, which are located on the front. Also in the front is the LED display, on which the current measured value can be read at any time. This facilitates the fast and precise control of the water values, especially in the industrial process.  A pH electrode is connected to the pH controller via BNC plug. The screw connections can be used to connect a temperature probe for automatic temperature compensation to the pH process controller. The pH controller finds its application in electroplating, the control of fresh and wastewater or in the wastewater neutralization. Due to the compact dimensions, the pH controller fits in every control panel.

The pipe camera is used to inspect channels and pipes. Depending on the model, the pipe camera has a 6 m / 196.9 ft or 12 m / 393.7 ft fiber optic push cable. At the end of the pipe camera, a motorized camera head is mounted. This camera head is able to be moved 36° horizontally and 18° vertically. Furthermore, the camera has a motorized focus, which makes it possible to realize field of view depths between 2 and 1 cm. At the head of the pipe camera are 4 ultra-bright LEDs, which perfectly illuminate tubes and channels. The pipe camera has an electronic meter counter, which makes it easier to pinpoint damaged areas or blockages in pipes. For documentation, images and videos can be recorded and saved with the pipe channel camera. For a better view of the image, the pipe camera can be connected via HDMI cable to an external monitor. The pipe camera takes pictures in 18P, so no detail is lost. To add commentary to the scan, the USB keyboard can be used. The pipe camera is supplied on a robust, made of aluminum, trolley. Additionally included is a trolley and a roller guide for the camera, which are used to mount the camera head. As a result, pipes and ducts between 8 and 12 mm / 3.1 ... 47.2 in can be driven.

The moisture meter has a measuring range of .…. 1.%. For a measurement, the ball head is positioned on the test object by the moisture meter. This guarantees a non-destructive measurement with the moisture meter. The moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces. A connection can be established with the moisture meter via the free app. As soon as a connection has been established, the current measured value is displayed by the moisture meter. The recorded data can be exported as .csv and .pdf after a measurement. This means that the data measured by the moisture meter can be processed further.

The parcel scale is a very precise measuring device for determining weights due to the resolution of 1 g and an accuracy of ± .1% of measuring range. The display units available on the parcel scale are lb / oz, kg / g, kg, g, lb, oz. The illuminated LC display of the parcel scale is sized in such a way that the measured value can be read easily even in very bright ambient conditions. In addition, the display of the parcel scale can be removed and can be positioned freely because of the spiral cable. With the piece counting function, the parcel scale can determine the number of objects, such as screws. For this purpose, a reference measurement is first carried out on the parcel scale. The piece counting function is then started by pressing a button. As an extension of the piece counting function, the weighing surface of the parcel scale can be opened to the side. In this way, for example, stacked envelopes or similar can be weighed with the parcel scale without them falling off the weighing surface. The parcel scale is supplied with power via a 6 V DC mains power adapter. In addition, the parcel scale can be operated with three 1.5 V batteries. This means that the parcel scale can be used both stationary and mobile. The automatic switch-off ensures that the parcel scale switches itself off within 5 minutes of inactivity. PCE Instruments optionally offers an ISO calibration certificate for the parcel scale.

The thermo-hygrometer is a measuring device for orienting measurement of temperature and relative humidity. With a temperature measuring range of -1 ... 5 °C and a humidity measuring range of 2 ... 9% RH the thermo-hygrometer covers a wide range of tasks. The thermo-hygrometer is used, for example, to monitor climatic conditions at workplaces, in cold stores or in the environment. In addition to the normal measuring mode, the thermo-hygrometer has a MIN / MAX function. This means that the thermo-hygrometer can continuously display the largest or smallest measured value. The low power consumption of <1 µA guarantees a long battery life.

PCE-PTS 1N is a heavy-duty, pallet truck, pallet jack, warehouse, dock or floor scale used to weigh industrial shipments up to 2 kg / 449 lbs / 2.2 Tons. Save precious time by weighing your pallets of merchandise right on the pallet jack. Eliminate the use of a forklift to carry pallets of items to a separate scale for weighing. Weigh your goods right at the dock during loading or unloading.

The radiation detector is a useful tool to examine solar cells for their characteristics. With a DC voltage range of … 6V and a DC current range of … 12 A, the radiation detector covers a large number of solar modules. The determined characteristic curves are saved directly on the solar module tester. Up to 1 measurements can be stored in the data memory of the radiation detector. The stored measured values ​​can then be read out and further processed on a PC with the associated software. In addition, it is possible to operate the radiation detector completely via the software. The radiation detector has two different measuring functions for determining the characteristics of a solar module. In the automatic mode, the characteristic curve is created with automatic parameters by the radiation detector. This gives the operator a first impression of the state of the solar module. In manual mode, the start and end of the current value can be set on the radiation detector. If the area of ​​the solar module and the power of the incoming radiation are stored in W/m², the radiation detector can calculate the efficiency and the fill factor of the cell. Another measuring function with the solar module tester is the one-point measurement. A specific current can be controlled and checked by the radiation detector. The LCD display of the radiation detector has a size of 4.8“. This means that the characteristic curve and all measured values ​​can be read off at the same time. In order to analyze the characteristic curve better, each individual measuring point on the radiation detector can be approached. For a different view of the X and Y axes, you can switch between current, voltage and power by pressing a button on the radiation detector. Because of its many different functions, the radiation detector is the ideal measuring device to examine solar modules for their effectiveness. The radiation detector is therefore used in photovoltaic systems and research facilities for the further development of solar modules. The radiation detector can optionally be equipped with an ISO calibration certificate.

Vibration Sensor  for monitoring the vibration speed / 4 ... 2 mA output MIL-C-515 connection / 3 ... 15 Hz bandwidth The Vibration Sensor has been developed for the continuous monitoring of the vibration speed. The vibration sensor is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range. The Vibration Sensor measures the vibration speed in the range of ± 12.7 mm / s or ± 25.4 mm / s in the frequency range between 3 Hz and 1500 kHz.  The measured vibration speed is output as a 4 ... 2 mA process current. The Vibration Sensor is looped through a MIL-C-515 connector to a controller or process display. Depending on the design, the connection socket is attached to the vibration sensor vertically or horizontally. The Vibration Sensor can be operated with a voltage of 12 ... 24 V DC.

The vibration sensor was developed for the continuous monitoring of vibration velocity. The vibration sensor is available in various designs. Depending on the type of vibration sensor, a distinction is made between design and measuring range. The vibration sensor measures vibration velocity within a range of ± 12.7 mm/s or ± 25.4 mm/s in the frequency range between 3 Hz and 1500 kHz. The measured vibration velocity is output as a 4 to 20 mA process current. The vibration sensor is connected to a controller or process display in a current loop via a MIL-C-5015 connector. Depending on the design, the connection socket is mounted vertically or horizontally on the vibration sensor. The vibration sensor can be operated with a voltage of 12 to 24 V DC. The panel-mounted measuring instrument is configurable as an AC and DC voltmeter (up to 600 Vac/DC) and an AC and DC ammeter (up to 5 Aac/DC). Furthermore, the panel-mounted measuring instrument displays measured values ​​of process signals (mA, VDC), thermocouples, resistive temperature sensors (Pt, Ni, PTC, and NTC), resistors, potentiometers, and frequency. The panel-mounted measuring instrument is configurable using the front-panel buttons. The panel-mounted measuring instrument is installed in a standard panel cutout size of 96 x 48 mm (1/8 DIN). The measured value is scalable to 4 digits (9999 / -1999). Also available on the panel meter are quick access to alarm setpoints, external control for activating predefined functions, Eco mode for low consumption, selectable dual scaling, and five configurable brightness levels. A single universal 18 ... 265 V AC/DC power supply transforms the panel meter into an easy-to-use process measuring device. Optional output and control modules (relay, analog output, Modbus RTU) are available to the panel meter user.

This is a portable battery-powered industrial pallet scale or floor scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 5 m / 16 ft away from the weighing beams, allowing for wall mounting. - Portable - Multiple TARE for whole weighing range - Threshold, sum-up and counting functions - Ingress protection rating: IP 54 - Ideal for use in warehouse, storage facility, shipping, receiving, loading dock, logistical, supply chain, retail, inventory and stock room applications

Vibration Sensor  for monitoring the vibration speed / 4 ... 2 mA output MIL-C-515 connection / 3 ... 1500 Hz bandwidth The Vibration Sensor has been developed for the continuous monitoring of the vibration speed. The vibration sensor is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range. The Vibration Sensor measures the vibration speed in the range of ± 12.7 mm / s or ± 25.4 mm / s in the frequency range between 3 Hz and 1500 kHz.  The measured vibration speed is output as a 4 ... 2 mA process current. The Vibration Sensor is looped through a MIL-C-515 connector to a controller or process display. Depending on the design, the connection socket is attached to the vibration sensor vertically or horizontally. The Vibration Sensor can be operated with a voltage of 12 ... 24 V DC.

The vibration sensor was developed for the continuous monitoring of vibration velocity. The vibration sensor is available in various designs. Depending on the type of vibration sensor, a distinction is made between design and measuring range. The vibration sensor measures vibration velocity within a range of ± 12.7 mm/s or ± 25.4 mm/s in the frequency range between 3 Hz and 1500 kHz. The measured vibration velocity is output as a 4 to 20 mA process current. The vibration sensor is connected to a controller or process display in a current loop via a MIL-C-5015 connector. Depending on the design, the connection socket is mounted vertically or horizontally on the vibration sensor. The vibration sensor can be operated with a voltage of 12 to 24 V DC.

Vibration Sensor  for monitoring the vibration speed / 4 ... 2 mA output MIL-C-515 connection / 3 ... 1500 Hz bandwidth The Vibration Sensor has been developed for the continuous monitoring of the vibration speed. The vibration sensor is available in different versions. Depending on the type of vibration sensor, a distinction is made between design and measuring range. The Vibration Sensor measures the vibration speed in the range of ± 12.7 mm / s or ± 25.4 mm / s in the frequency range between 3 Hz and 1500 kHz.  The measured vibration speed is output as a 4 ... 2 mA process current. The Vibration Sensor is looped through a MIL-C-515 connector to a controller or process display. Depending on the design, the connection socket is attached to the vibration sensor vertically or horizontally. The Vibration Sensor can be operated with a voltage of 12 ... 24 V DC.

The Radioactivity Meter offers comprehensive measurement functions for α, β and γ radiation and is the test instrument of choice for professional radiation measurements. With the ability to precisely record the accumulated radiation dose and count the radiation in both cps (counts per second) and cpm (counts per minute), the Radioactivity Meter provides accurate and reliable measurement data at all times. The integrated data logger with 32 GB memory saves the measured values and allows them to be analysed in detail. The measurement history is shown graphically on the TFT colour display. Individual alarm limits can also be set in the Radioactivity Meter: a warning message appears if a certain radiation value or a defined radiation dose is exceeded. Another feature of the Radioactivity Meter is the acoustic radiation pulse output. Each detected radiation pulse is made audible by a sound, which provides immediate feedback on the radiation activity in the environment. This function can also be deactivated. The integrated data logger can record up to 10 million measuring points at the touch of a key or after entering a start time. This Radioactivity Meter combines precision, ease of use and innovative technology - an indispensable tool for the safe handling of radioactive materials. Radiation protection officers and safety specialists use the Radioactivity Meter when they are exposed to radioactive environments but it can also be used quickly in scientific fields such as nuclear research, medical physics or for simple environmental monitoring.

The environmental meter is a small, highly sensitive radiation warning device mainly used for monitoring X, ß and y. Black and white illuminated OLED display that is clearly visible even at night. It has a warning flashing function. The environmental meter itself has two alarm modes: sound and LED light. The alarm limit can be set as desired. When the alarm limit is reached, an alarm is given, for protection. The main technical indicators of the device comply with the international standard.

This radiation meter offers a measuring range of 0.00 to 1000 µSv/h and ensures precise measurements with a resolution of 0.01 µSv/h. Equipped with a highly sensitive Geiger counter tube and a sensitivity of 80 µSv/h, it enables reliable detection of radiation levels over a wide energy range from 48 keV to 1500 keV. Optionally, the device has alarm modes with adjustable limit values from 0.2 µSv/h to 10 µSv/h, which provide the user with acoustic or vibration-based warnings to react quickly to increased radiation levels. In addition to the current measured value, the radiation meter also graphically displays the course of the measurement curve over the last 3 minutes. Our radiation meter with a Geiger counter tube as a sensor is a versatile instrument for monitoring X, gamma and hard beta radiation in radioactive work areas. With fast response, a wide measurement range and dose equivalent rate display, it offers a reliable solution for a wide range of applications. Commonly used in workplace, industrial and medical applications as well as in the environmental control of nuclear facilities. With compact dimensions and an LC colour display, the radiation meter is user-friendly and suitable for use in various environments. The automatic switch-off feature helps to extend battery life and ensures efficient use. Overall, the device offers a reliable and precise solution for monitoring radiation in a variety of applications.

The Geiger Counter with a measurement range of 0 to 9999 μSv/h and a resolution of 0.01 μSv/h is a powerful and precise instrument for detecting beta (β), gamma (γ) and X-ray radiation. Equipped with an energy-compensated Geiger-Müller tube, it offers a high sensitivity of 80 CPM/μSv (for Co-60) and a flexible display in μSv/h, CPM and CPS. Thanks to its compact and handy design, the Geiger Counter is easy to use and is ideal for measuring small changes in radiation values. Our Geiger Counter is equipped with a display that shows the date and time and offers the option of switching the display from white to black to optimise readability under different lighting conditions. An adjustable audible alarm provides additional safety by making you aware of increased radiation levels. Battery operation allows flexible use in different areas. The charging time of the device is only approx. 1-2 hours. The Geiger Counter is used, for example, in environmental protection by security forces, in the medical sector and also by private individuals to monitor their living environment.

The geiger counter is a high-precision instrument developed for the detection of gamma, beta and X-rays. With its sensitive detection technology, it enables reliable measurement and monitoring of the radiation environment. Dose measurement is a central aspect of the radiation meter. The geiger counter enables precise determination of the radiation dose and allows cumulative radiation measurement over a defined period of time. These functions are crucial for the assessment of radiation exposure and compliance with safety-related standards. The results of the radiation measurements are shown on the easy-to-read display in microsieverts per hour (µSv/h) and microroentgen per hour (µR/h). The geiger counter is equipped with an adjustable acoustic alarm that alerts you if predefined radiation values are exceeded. The long battery life ensures reliable measurement over long periods of time without interruption. The field of application ranges from radiology to disaster control. Radiation measuring devices from PCE Instruments are also used in industry.

The digital manifold gauge is equipped with a powerful motor that provides high torque. The motor power is 0.75 HP (550 W), ensuring reliable and efficient performance. With a high flow rate of 226 l/min., our digital manifold gauge is capable of efficiently extracting large volumes of refrigerants. The digital manifold gauge is equipped with connections of 1/4" and 3/8", allowing for versatility and adaptability to various refrigerant hoses and applications. Our digital manifold gauge is equipped with a state-of-the-art filter element that effectively helps reduce oil mist. This filter element not only enhances the pump's lifespan but also ensures a cleaner working environment and contributes to environmental preservation. The ergonomically designed rubber handle enables secure transport and easy handling. An digital manifold gauge pump is used to evacuate air conditioning, refrigeration systems, or heat pumps before they are filled with refrigerant. This is crucial for removing moisture and air from the system, enhancing the efficiency of the air conditioning or heat pump.

This residual current device (RCD) tester determines the tripping current and tripping time of residual current devices (RCDs). The various selectable test currents allow for extremely flexible use of this RCD tester. Residual current devices (RCDs) are present in every household electrical system. These interrupt the power supply as soon as a fault current occurs. RCD testers allow a fault current to flow and determine the level of fault current at which the residual current device (RCD) responds. The response time is also measured. These two parameters, tripping current and tripping time, are the safety-relevant parameters of an RCD. This RCD tester is very easy to use. In addition to the maximum test current, you can set the type of RCD (normal or selective) and whether the tripping current or tripping time should be measured. You can also select whether the test current should begin with a positive or negative half-wave. Once all settings have been configured, the measurement begins at the touch of a button. The RCD tester immediately provides a pass/fail rating based on the display color. You can read the measured value on the large LCD display. If the input voltage is too high, if there is no grounding, or if the ground potential exceeds 50 V, the RCD tester issues a warning signal.

Our Thermometer is the ideal solution for monitoring air quality in homes, businesses or public buildings. The Thermometer impresses with its modern design and compact size. This makes it versatile and easy to use. Various measurement parameters such as CO2, formaldehyde and TVOC can be read on the 3.5-inch LC display. In addition, the Thermometer displays room temperature and humidity and measures particulate matter (PM 1 / PM 2.5 / PM 10). The display uses three colours - green, orange and red - to show the user immediately when the values become critical. The Thermometer enables a Wi-Fi connection with other devices and allows the user to make individual settings via the Smart Life app. Thanks to the Smart Life app, the Thermometer can be accessed from anywhere. In addition, the data can be called up as values and displayed as a curve. This data shows the progression of the measurements and can be called up on a daily, weekly or monthly basis. This allows the user to track the development of air quality over a certain period of time. The Thermometer is also equipped with a wake-up sensor. This wakes up the display from sleep mode when approached or by waving. This function can be deactivated in the app. The brightness of the display cannot be adjusted to increase the battery life. The same data is sent to the smartphone for evaluation. The operating time with a fully charged battery is approx. 4 hours.

The transmitter converts an analog input signal into a corresponding analog output signal. The input and output signals from the transmitter are completely galvanically isolated. The input and output range is set via two buttons. The type of adjustment is displayed on an internal LED display. Over 100 different combinations of input and output, as well as the free scaling within the set ranges, make this transmitter a universally applicable device and save an expensive and laborious storage of different types. Since the input and output ranges can also be set identically, the transmitter can also be used for galvanic decoupling. The transmitter is simply snapped onto a C or DIN rail. The signal converter can be operated with a voltage between 18 ... 265V AC / DC.

The PM2.5 particulate matter monitor is used to continuously measure the particulate matter content at the workplace. The monitor displays PM2.5 particulate matter as well as temperature and humidity on the display. The measuring range of the monitor ranges from 0... 500 μg / m³ PM2.5. This makes the PM2.5 meter an optimal test instrument to constantly have an overview of the fine dust content. Below the large measured value display of the PM2.5 content, the PM2.5 monitor provides quick information about the air quality with the aid of pictograms. This fine dust monitor is powered by a rechargeable battery. The LC display is illuminated and easy to read from any angle, for example when the meter is on a desk. In addition to the standard white lighting, the PM2.5 monitor switches the lighting to red in the event of an alarm.