PCE Instruments

The closing force transducer is a wireless, electronic closing force measuring device for rail vehicle and bus doors and sliding steps. A further development of the tried and tested Original BIA Class 1 measuring device is supplied with the closing force transducer. It combines the well-known robust construction for years of use in harsh environments and lasting precision with the flexibility of a wireless application and a user-friendly app. This results in many advantages for you in daily use, such as automatic measuring point identification via QR and barcodes, the immediate availability of the measured values and the direct creation of a PDF report.

The original BIA class 1 closing force measuring device is an electronic closing force measuring device for rail vehicle and bus doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments. For cyclic measurements on vehicles with multiple doors, a quick and easy implementation is of great importance. For this purpose, software was developed that drastically reduces the measurement process and the effort required for documentation. With just a few operating steps, the measurements for a complete vehicle can be taken over, printed out in tabular form and saved in a database. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test procedure.

The original BIA class 2 is a mechanical closing force measuring device for bus doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments.

The closing force measuring device is a wireless, electronic measuring device for rail vehicle doors and sliding steps. The closing force measuring device is a further development of the well-established BIA600 closing force measuring device. It combines the well-known robust construction for years of use in harsh environments and lasting precision with the flexibility of a wireless application and a user-friendly app. This results in many advantages for you in daily use, such as automatic measuring point identification via QR and barcodes, the immediate availability of the measured values and the direct creation of a PDF report.

The closing force measuring device is an electronic measuring device for rail vehicle doors. The elaborate design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments. For cyclic measurements on vehicles with multiple doors, a quick and easy implementation is of great importance. For this purpose, software was developed for the clamping force measuring device, which drastically reduces the measurement process and the effort involved in documentation. With just a few operating steps, the measurements of a complete vehicle can be taken over, evaluated in tabular or graphic form and then printed out as a report. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test procedure.

The closing force measuring device is a wireless, electronic measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections. A further development of the well-established FM 100 closing force measuring device is supplied with the closing force measuring device. It combines the well-known robust construction for years of use in harsh environments and lasting precision with the flexibility of a wireless application and a user-friendly app. This results in many advantages for you in daily use, such as automatic measuring point identification via QR and barcodes, the immediate availability of the measured values and the direct creation of a PDF report.

The closing force transducer is an electronic measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections. Its uncompromising design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments. In the case of cyclical measurements on systems with several doors and gates, a quick and easy implementation is of great importance. For this purpose, Drive Test has developed software that drastically reduces the measurement process and the effort required for documentation. With just a few operating steps, the measurements of a complete system can be taken over, printed out in tabular form and saved in a database. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test procedure.

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry. It is also increasingly being used by technical monitoring institutions. Its uncompromising design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments. When it comes to measuring setups in testing and production, quick and easy execution is of great importance. For this purpose, Drive Test has developed software that drastically reduces the measurement process and the effort required for documentation. With just a few operating steps, the measurements can be loaded into a PC, evaluated, exported and documented. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test procedure.

The closing force measuring device is an electronic closing force measuring device for power-operated windows, sunroofs, and tailgates in the automotive sector. Typical applications include testing and production in the automotive industry. It is also increasingly used by technical inspection agencies. Its uncompromising design combines precision with practical robustness, ensuring accurate measurement values ​​even after years of use in harsh environments. Fast and easy execution is crucial for measurement setups in testing and production. For this purpose, we have developed software that drastically reduces the measurement process and the effort required for documentation. With just a few steps, the measurements can be loaded onto a PC, evaluated, exported, and documented. We provide suitable interfaces (e.g., Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The force transducer is an electronic closing force measuring device for power-operated windows, sunroofs and tailgates in the motor vehicle sector. Typical areas of application are testing and production in the automotive industry. It is also increasingly being used by technical monitoring institutions. Its uncompromising design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments. When it comes to measuring setups in testing and production, quick and easy execution is of great importance. For this purpose, Drive Test has developed software that drastically reduces the measurement process and the effort required for documentation. With just a few operating steps, the measurements can be loaded into a PC, evaluated, exported and documented. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test procedure.

The closing force measuring device is an electronic measuring device for power-operated windows, sliding roofs and doors in the automotive sector and for sliding steps in the rail vehicle sector. It allows measurements up to 600 N with a spring stiffness of 10 N/mm. Its uncompromising design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments. For measurement set-ups in testing and production, quick and easy execution is of great importance. For this purpose, Drive Test has developed software that drastically reduces the measurement procedure and the effort required for documentation. With just a few operating steps, the measurements can be loaded into a PC, evaluated, exported and documented. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The closing force measuring device is an electronic device for power-operated windows in the automotive sector. Typical applications include testing and production in the automotive industry. For this purpose, we have developed a device that is characterized by its ease of use for repeatable measurements. Due to the requirements of various common standards, we offer the device with different spring stiffnesses. It is also increasingly being used by technical inspection institutions. Its uncompromising design combines precision with practical robustness and ensures accurate measurement values ​​even after years of use in harsh environments. Fast and easy execution is crucial for measurement setups in testing and production. For this purpose, we have developed software that drastically reduces the measurement process and the effort required for documentation. With just a few steps, the measurements can be transferred to a PC, evaluated, exported, and documented. We provide suitable interfaces (e.g., Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The closing force measuring device is an electronic device for power-operated windows in the automotive sector. Typical applications include testing and production in the automotive industry. For this purpose, we have developed a device that is characterized by its ease of use for repeatable measurements. Due to the requirements of various common standards, we offer the device with different spring stiffnesses. It is also increasingly being used by technical inspection institutions. Its uncompromising design combines precision with practical robustness and ensures accurate measurement values ​​even after years of use in harsh environments. Fast and easy execution is crucial for measurement setups in testing and production. For this purpose, we have developed software that drastically reduces the measurement process and the effort required for documentation. With just a few steps, the measurements can be transferred to a PC, evaluated, exported, and documented. We provide suitable interfaces (e.g., Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The closing force measuring device is an electronic device for power-operated windows in the automotive sector. Typical applications include testing and production in the automotive industry. For this purpose, we have developed a device that is characterized by its ease of use for repeatable measurements. Due to the requirements of various common standards, we offer the device with different spring stiffnesses. It is also increasingly being used by technical inspection institutions. Its uncompromising design combines precision with practical robustness and ensures accurate measurement values ​​even after years of use in harsh environments. Fast and easy execution is crucial for measurement setups in testing and production. For this purpose, we have developed software that drastically reduces the measurement process and the effort required for documentation. With just a few steps, the measurements can be transferred to a PC, evaluated, exported, and documented. We provide suitable interfaces (e.g., Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The closing force measuring device is an electronic device for power-operated windows in the automotive sector. Typical applications include testing and production in the automotive industry. For this purpose, we have developed a device that is characterized by its ease of use for repeatable measurements. Due to the requirements of various common standards, we offer the device with different spring stiffnesses. It is also increasingly being used by technical inspection institutions. Its uncompromising design combines precision with practical robustness and ensures accurate measurement values ​​even after years of use in harsh environments. Fast and easy execution is crucial for measurement setups in testing and production. For this purpose, we have developed software that drastically reduces the measurement process and the effort required for documentation. With just a few steps, the measurements can be transferred to a PC, evaluated, exported, and documented. We provide suitable interfaces (e.g., Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The closing force measuring device is an electronic closing force measuring device for power-operated windows in the automotive sector. Typical areas of application are testing and production in the automotive industry. For this purpose, we have developed a device that is easy to use for repetitive measurements. Due to the requirements of various common standards, we offer the device with different spring stiffnesses. It is also increasingly used by technical monitoring institutions. Its uncompromising design combines precision with practical robustness and ensures accurate measurements even after years of use in harsh environments. For measurement set-ups in testing and production, quick and easy execution is of great importance. For this purpose, software has been developed that drastically reduces the measurement procedure and the effort required for documentation. With just a few operating steps, the measurements can be transferred to a PC, evaluated, exported and documented. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The closing force measuring device is an electronic measuring device for sliding roofs, automatic window lifters and tailgates in the automotive sector. Typical applications are manufacturing, development and production tests in the automotive industry. The closing force gauge with its low spring stiffness was developed to test soft elements that are clamped into a closing system. The device excels with easy handling for repetitive measurements. Its uncompromising design combines precision with practical robustness and ensures accurate readings even after years of use in harsh environments. For measurement set-ups in testing and manufacturing, quick and easy execution is of great importance. For this purpose, software has been developed that drastically reduces the measurement procedure and the effort required for documentation. With just a few operating steps, the measurements can be transferred to a PC, evaluated, exported and documented. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test sequence.

The closing force transducer from Drive Test is a wireless, electronic closing force measuring device for automatic elevator doors and machine guards. With the FM 300 BT, Drive Test delivers a further development of the tried and tested FM 300 measuring device. It combines the well-known robust design for years of use in harsh environments and lasting precision with the flexibility of a wireless application and a user-friendly app. This results in many advantages for you in daily use, such as automatic measuring point identification via QR and barcodes, the immediate availability of the measured values and the direct creation of a PDF report.

The closing force measuring device is an electronic measuring device for elevator doors and protective devices on machines. Typical use is both the final acceptance of new systems and regular inspection. Its uncompromising design combines precision with practical robustness and ensures accurate measured values even after years of use in harsh environments. In the case of cyclical measurements on objects with several elevators, a quick and easy implementation is of great importance. For this purpose, software was developed that drastically reduces the measurement process and the effort required for documentation. With just a few operating steps, the measurements of all elevator doors in a building can be taken over, printed out in tabular form and saved in a database. We provide suitable interfaces (e.g. Microsoft® DLL or National Instruments® LabVIEW) for integration into an automated test procedure.

A handheld refractometer used to determine the salt content or % salinity ppt and salinity SG (specific gravity) of salt water, sea water and other solutions containing a concentration of salt. This portable pocket salinity refractometer has a double scale to allow the user to view both measurement parameters at once. The ultra-smooth focusing eyepiece provides high-quality optics, presenting an easy-to-read scale on a semi-transparent blue and fully transparent clear background. Ambient room lighting offers ample illumination to clearly read the results.

The meter is an easy-to-use handheld device for measuring pH, mV, °C and °F. With the PCE-228 pH meter, both temperature and pH values can be directly stored onto a SD card (in Excel format), or transferred to a PC through an RS-232 interface. An optional software and data cable for the meter are available as optional accessories to transfer data to a computer. Temperature compensation in the meter can be done manually or automatically by way of the temperature sensor which is included. The pH meter has two calibration points. The calibration can be done with the trimmer on the side of the device which is protected under a cover. With this combined device, the user can determine pH value, temperature or Redox potency (ORP). For the latter measurement parameter, a Redox electrode must be ordered separately from the pH meter. We recommend the ORP-14 electrode. The pH meter is powered by a 9V battery which is included.

With a resolution of 0.1 mg, this checkweighing scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the fine scale. Typical areas of application for the checkweighing scale are therefore in laboratories or in research facilities. Weighing the smallest samples is very difficult because even a small gust of wind falsifies the measured value. For this reason, a wind shield is installed around the weighing surface of the checkweighing scale. This ensures that even the smallest gusts of wind have no effect on the measurement of the checkweighing scale. The checkweighing scale can be connected directly to a PC via the RS232 interface. With the optionally available software for the checkweighing scale, the measurement data can be presented in a table. A graphic representation of the measured values ​​from the checkweighing scale is also possible with the software. There is also the option of exporting the measured values ​​recorded by the checkweighing scale. In this way, the measured values ​​of the checkweighing scale can be conveniently incorporated into presentations, sent by email or simply printed out. If necessary, the checkweighing scale can be checked with the calibration weight supplied. This ensures that the checkweighing scale delivers a perfect measurement result. The checkweighing scale can also be adjusted by the operator in a very short time using the calibration weight. With the built-in bubble level, the current positioning of the checkweighing scale can be determined at an installation location. If the positioning of the checkweighing scale is not suitable, this can be readjusted using the height-adjustable feet. This ensures that the checkweighing scale is properly aligned with the current installation location.

The PCE-228-Kit includes a multifunctional pH meter complete with a PE-3 electrode, temperature sensor, SD memory card, batteries, user manual, calibration solution and protective carrying case. The included PCE-288 pH meter is an easy-to-use handheld device for measuring pH, mV and °C. With the PCE-228 pH meter, both temperature and pH values can be directly stored onto an SD card in Excel format, or transferred to a PC through the RS-232 interface. An optional software and data cable for the PCE-228 pH meter are available as optional accessories to transfer data to a computer.   Temperature compensation in the PCE-228 pH meter can be done manually or automatically by way of the temperature sensor which is included. The pH meter has two calibration points. The calibration can be done with the trimmer on the side of the device which is protected under a cover. With this combined device, the user can determine pH value, temperature or Redox potency (ORP). For the latter measurement parameter, a Redox electrode must be ordered separately from the PCE-228 pH meter. We recommend the ORP-14 electrode. The pH meter is powered by a 9V battery which is included. Here at this link you can find an overview of any type of pH meter that you may need.

The main purpose of cosmetics production is not only to make good-smelling products with good-sounding names and lists of beneficial ingredients, but to make them efficient so that these products really improve the condition of the skin or hair and in no way damage them. The pH measurement in cosmetics is a priority test that should be performed not only to ensure that the pH of the product matches the pH of the skin, but also to ensure good quality, suitable viscosity, color / odor and to ensure durability of the cosmetics.  A too acidic or too alkaline medium in shampoo can, for example, lead to a disorder and cause scalp problems. Therefore, the pH value in cosmetics is strictly and continuously monitored and not only in the final product. It is important to understand that monitoring is required at all stages: first in the raw materials and all the ingredients, then during the production process and finally in the finished shampoo application, gel / dye / foam that are on the shelves of the supermarkets. Here, it is necessary to fulfill the requirements and regulations of health organizations and GMP principles. Many of us have experienced at least once that after a short while the pleasant smell of the foam worsens, even though in the beginning everything was fine. This is proof that the manufacturer made mistakes during the production process and perhaps did not pay enough attention to measuring and correcting the pH. The cosmetic product should not only be perfect on the day of its manufacture and meet the standard, it should also have a very good stability. Today, many hair and facial products are presented as "BIO". Manufacturers of such products need to remember that making such a product is much harder. The natural ingredients that make the product "BIO" can be quite capricious. When talking about standard cosmetic products (both hair and skin), the ideal pH is between 4.5 ... 5.5. Depending on the skin type for which the product is intended, and also on the function of the product (refers to chemical substances, hair dyes, strong hair and body sprays), the values ​​may be lower and higher. The use of a pH meter with a special glass electrode is one of the well-known methods of pH measurement in cosmetics. The pH meter ensures that you get reliable results when taking measurements in shampoo, liquid cleansing toners and foams, gels and many other substances (containing water). pH meters used for cosmetics are often portable, very easy to use, light in weight and easy to handle. The glass electrode is perfect on the one hand because it is always easy to keep clean, but on the other hand a glass electrode requires careful handling because of its fragility. Modern electrodes receive special protection, such as "a coat" around them, which makes them very sturdy. The application of the pH electrode requires attention and careful adjustment. It is necessary to follow all rules regarding the application, cleaning and maintenance of this sensitive instrument. Although the pH tests are carried out on the additives or finished product of the shampoo, it is imperative to maintain the required ambient temperature, as their deviation can lead to erroneous measurements. The pH and maintenance of the efficacy of cosmetics is one of the reasons why such products should be stored at certain temperatures. Some of them should not be refrigerated or exposed to direct sunlight and excessively warm temperatures.

The soil pH meter is used to measure the soil pH value. The pH and temperature can be stored directly on the SD card. The special pH electrode of the pH meter is manufactured so that it is possible to measure with the pH meter in loosened soil. Temperature compensation is either manual or automatic via the supplied temperature sensor. Please always make sure that the measuring principle requires a minimum residual moisture in the soil. Thus, this soil pH meter is the ideal solution for the accurate measurement of soil pH, in substrates, for horticultural irrigation solutions used in greenhouses and also in agricultural products and plants. The meter is always factory calibrated. A continuous recalibration of the pH meter is carried out by means of the supplied calibration standards (buffer solutions). The calibration data remains stored when the battery is changed. In general, you can simply pierce the electrode into the ground and read the pH directly on the digital display. If you would like to carry out a measurement according to DIN or if you can not penetrate deep enough into the soil due to soil hardness, then you should prepare a DIN soil solution and use it for the exact measurement. Professional gardeners as well as environmentalists know how much depends on the condition of the soil. Depending on its composition it may be very fertile, or absolutely inappropriate for cultivation. pH level (acidity) of the soil, together with the temperature, moisture content and of course amount of light determine the quality of the soil, in the garden, on the fields, in the greenhouses, winter gardens, on the terrace, flowers beds or in the pots at home. pH meter with a thin electrode is applicable anywhere where pH value of a soil sample should be measured. Due to the thin long tip, penetrating the soil is very easy, and the measurement is immediate. The results indicate whether certain measures should be taken to change a too acidic or too alkalic medium in the soil and to adjust it in correspondence with the plans that are growing or will be growing in the soil. Not all kinds of plants require the same soil. And there is no ideal standard which all the gardeners should strive for. Neutral pH for soil is between 6.5 to 7, but there are many agricultural cultures that need 6 and even 5. A correctly prepared soil sample is sufficient for getting a reliable result and making a conclusion about the soil condition. Electrode should be handled with care and possible not applied in the sample with stones or rock particles, since it may damage the glass. Correct cleaning after measuring procedure and storage allow to apply the same electrode over a longer time period.

The surface pH meter is used to measure the pH on surfaces such as paper, cardboard, leather, textiles and skin. The pH and temperature can be stored directly on the SD card. The special pH electrode of the pH meter is particularly flat and made of epoxy, which makes the pH electrode particularly resistant to impact. Temperature compensation is either manual or automatic via the supplied temperature sensor. In addition to the measurement of the pH value of surfaces, the pH meter can also be used to measure very small sample volumes from .1 ml upwards. For this, the surface pH meter is supplied with a special measuring cuvette. This cuvette can be plugged directly onto the electrode of the pH meter.

The wine pH meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the pH meter to a PC via the RS-232 interface. For this purpose, we optionally offer software and the appropriate RS-232 interface cable as accessories. The temperature compensation takes place either manually or automatically using the temperature sensor supplied. All of this allows a quick and reliable pH measurement. The pH meter has a three-point calibration, which is carried out automatically. The combination measuring device can be used to determine the pH value, the temperature or the REDOX potential (ORP). For the latter measurement parameter, however, a REDOX electrode must be ordered additionally. Here we recommend the ORP electrode ORP-14. The pH meter is battery operated (6 x 1.5 V batteries are included).

The durometer can be used to quickly check the hardness of components even when they are installed. The durometer impresses with its large measuring range, easy handling, robust design and temperature resistance down to -20°C/-4°F. In addition to the hardness in Rockwell, Brinell and Vickers, the durometer can also be used to determine the tensile strength of steels up to 1740 MPa. The uci durometer has a manual test probe with a test force of 50N as standard, with this probe it is possible to measure from all directions in space without a correction factor. Another advantage of the durometer is its NDT feature. At the tip of the probe there is a Vickers diamond which is excited in the ultrasonic frequency range. If the diamond touches the test piece surface during the hardness test, the vibration is damped. The resulting frequency shift is directly related to the surface hardness of the test piece. Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains. The uci durometer is therefore used for checking small thin-walled components, for surface-hardened test specimens or for nitrided components. The durometer has also proven itself in the measurement of weld seams and the inspection of components with complex geometries. In addition to the UCI measuring method, the durometer can also be equipped with a rebound tester. This allows the durometer to be upgraded to a Leeb durometer. The universal durometer combines the advantages of two methods: Ultrasonic Contact Impedance (UCI) and Dynamic Rebound (Leeb). This allows the user to solve almost any field hardness testing task. The universal durometerr enables express hardness testing of carbon and structural steels, welds, electroplated coatings, overlays, heat resistant, corrosion resistant and stainless steels, hardness measurement of hardened surfaces, thin-walled hardened parts, even in hard-to-reach places and at any angle. Ultrasonic contact impedance (ASTM A1038) With the UCI probe, hardness testing of small, thin specimens with complex shapes is now possible. With the UCI probe, the user can measure the hardness of grooves, small radius surfaces, shaft necks with mirror-like surfaces, gears and blades. Rebound hardness test according to Leeb (ASTM A956) With a dynamic type D probe (Leeb probe), the user can test the hardness of solid parts with rough surfaces. The instrument can be equipped with additional interchangeable probes with different dimensions and spring stiffnesses. Main function This instrument has all the functions for working with materials and scales, making it a universal instrument for non-destructive metal hardness testing. The one-point calibration allows the creation of a user-defined hardness scale based on an available sample with known hardness. This advantage allows the user to calibrate the durometer as accurately as possible to approach the accuracy of a stationary durometer. It also allows the user to measure the hardness of a large batch of products quickly and with high accuracy. The user can create and store more than 500 hardness scales and view the history of all measurements after testing. The UCI probe is pre-calibrated for steel. The Leeb probe is pre-calibrated for steel, cast iron, stainless steel, aluminium, bronze and brass, copper. Standard Rockwell, Vickers, Brinell and Shore calibrations are also available. The user can create and correct additional calibrations for soft and hard materials. Key benefits of the universal durometer: - Large colour display with bright backlight. - Stable operation under difficult climatic conditions. - Extended temperature range (frost-proof down to -20°C/-4°F). - For long-term operation under field and workshop conditions, the instrument is designed in a dust proof housing. - Rubber buffers protect the unit from accidental shocks or falls from a height of up to 5 m, while the unit remains fully functional. - 2 detachable probes: Ultrasonic contact impedance (UCI) and dynamic rebound (Leeb). - One-point calibration function (type calibration) - The unit has the functions of displaying the minimum, maximum and average hardness values, the function of filtering out of range false readings. - The function of simultaneous display of 20 measurements in a series enables the analysis of the with a large number of measurements and significantly increases the speed of processing the results of the results considerably. - Function to create diagrams for a series of measurements helps visualise the hardness measurement over the entire surface of a dimensionally stable product. - For expert work to achieve maximum accuracy, it is possible to set the sensitivity coefficient and to adjust the signal processing of the probe. - The automatic storage of all measurements avoids data loss and allows, if necessary, an analysis of the data after a longer period of time. analysis of the data after a longer period of time - The storage of the calibration in the memory of the UCI probe allows a quick exchange of the sensor sensor without having to return the unit to the manufacturer for factory calibration in the event of a defect. manufacturer for factory calibration.

The Climate Meter has been designed for professional use in fields such as the air-conditioning sector. The Climate Meter determines both relative humidity and ambient temperature. The Climate Meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of the Climate Meter allows you to record humidity and temperature values, with a free adjustment of the measurement rate for real time measurements or data storage thanks to its SD memory card (1 to 16 GB). The Climate Meter can be previously programmed via the keypad so the device can record values without the need of being present during the process. For long term records, we recommend you to power the Climate Meter by means of a power adapter (optional). Recorded values can be transferred to a PC for further analysis (.xls file in the SD card). This property allows you to check measured values or design a graphic by means of the Excel calculation program.

The decibel meter is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The decibel meter has a logger function, which allows storage of up to 32,700 readings. This makes it ideal for long term monitoring. The decibel meter can be connected to the PC with a USB cable. A live measurement is also possible with the sound level meter and the data can be viewed directly and can be evaluated. The software provides data representation in graphic formats and tables. This data can be transferred, for example, to MS Excel. The sound level meter has an analogue output and offers further features that are unique in its class.

The noise meter / sound meter is particularly suitable for measuring noise pollution in the field of industrial, health, safety and environmental monitoring. The sound level meter has a logger function, which enables the storage of up to 32,700 measured values. This makes it ideal for long-term monitoring. The sound level meter can be connected to the PC with a USB cable. A live measurement is also possible with the sound level meter and the data can be viewed directly and evaluated. The software offers data representations in graphic formats and tables. This data can be transferred to MS Excel, for example. The data logger has an analog output and offers additional features that are unique in its class. The calibration frequency for the class II sound calibrator is 1 Hz and is a sinusoidal shape. Compared to other calibrators, this class II sound calibrator has three adjustable sound pressure levels. 94 dB, 104 dB and 114 dB are available and can be selected by pressing a button on the class II sound calibrator. This means that an additional 104 dB sound pressure level is available. With an accuracy of ± 0.4 dB, the class II sound calibrator is particularly precise. This means that the Class II sound calibrator can be used to check sound measuring devices for their accuracy and, if necessary, to adjust them. The class II sound calibrator can optionally be equipped with an ISO certificate. With a battery life of 5 hours, the class II sound calibrator has a particularly long operating time. The integrated automatic switch-off automatically switches off the class II sound calibrator after 2 minutes of inactivity.

The noise meter has a measuring range of 30 … 130 dB and can be used where sources of noise are to be recorded. For example, the noise meter is used to control the noise level on stamping presses, ventilation systems or on busy roads. With the push of a button, you can switch between the frequency ratings A and C on the Bluetooth noise meter. With the data logger function of the noise meter, up to 32,700 readings can be recorded. For optimal positioning of the microphone, the noise meter can also be mounted on a tripod. With the Bluetooth interface, the Bluetooth sound level meter can be set up with an Android or iOS device. The measured values ​​from the Bluetooth sound level meter live can be transmitted and saved via the free app. The values ​​measured by the noise meter can then be exported in CSV file format for further processing. In addition to the Bluetooth interface, the noise meter also has a mini USB interface. This allows the Bluetooth noise meter to be connected to a computer. With the software for the Bluetooth noise meter, the measured values ​​can then be transmitted live to the PC and, if necessary, exported as a CSV for further processing. With the included 12V DC power supply, the Bluetooth noise meter can be used stationary. For mobile use, the Bluetooth noise meter can be operated with a 9V block battery. The transport case enables safe transport for the Bluetooth noise meter for mobile use. Optionally, the Bluetooth noise meter can be equipped with an ISO calibration certificate.

Our sound level meter records and visualizes sound levels in the range from 30 to 130 dB. It offers three manual measuring ranges as well as an automatic measuring range mode. When switched on, the automatic mode with a range of 30 to 130 dB is activated by default, while the manual ranges are 30 to 90 dB, 50 to 110 dB and 70 to 130 dB. The user can choose between the frequency weightings A or C and the time weightings "Fast" and "Slow" by pressing a button on the sound level meter. The "Fast"mode is used for measuring short sound pulses or peak levels, while the "Slow"mode is suitable for general sound level measurements. The sound level meter is charged via the micro-USB interface and comes in a practical case for transportation. In addition to the basic functions such as MIN, MAX and HOLD, the sound level meter automatically switches off after approximately 3 minutes of inactivity to extend battery life. The "Auto Power Off" function can also be deactivated.

Our Refractometer / Handheld Refractometer determines the percentage of acetic acid in fluids with a measurement range of 0 to 75%. The measurement result and the temperature of the sample are shown in two lines on the LCD display of the Refractometer / Handheld Refractometer. The Refractometer / Handheld Refractometer can measure various parameters such as percentage and refractive index quickly and accurately with just four to five drops of the sample. The Refractometer / Handheld Refractometer is used, for instance, to determine the acetic acid content in food. The funnel-shaped stainless steel ring protects the glass prism from damage, into which the liquid sample to be measured is placed. The internal light source enables measurement under poor lighting conditions. Our Refractometer / Handheld Refractometer is supplied in a rugged plastic case with pipette and charging cable.

Our condition monitoring sound level meter records and visualizes sound levels in the range from 30 to 130 dB. It has three manual measuring ranges and an automatic measuring range mode. When the device is switched on, the automatic mode with a range of 30 to 130 dB is activated by default. The manual ranges are 30 to 90 dB, 50 to 110 dB and 70 to 130 dB. The user can choose between the frequency weightings A and C and between the time weightings "Fast" and "Slow" at the touch of a button. Before the recording mode can be started, the condition monitor must be connected to a PC via a micro USB port and the parameters configured using the PC software. The storage interval, the number of measured values and also the starting point of the condition monitoring sound level meter can be set. Up to 32000 measured values can be recorded with this function. The interval can be set on the condition monitoring sound level meter in steps from 1s to max. 24h. The condition monitoring sound level meter has the MIN, MAX and HOLD functions. In addition, the device switches off automatically after about 3 minutes of inactivity to extend the operating time of the battery. The "Auto Power Off" function can also be deactivated. The sound level meter is charged via the micro-USB interface and comes in a practical case for transportation.

The UCI hardness tester has been designed for the non-destructive hardness measurement of metallic components. The UCI hardness tester works on the basis of the Ultrasonic Contact Impedance test procedure. This UCI procedure works as follows: a Vickers diamond at the probe is stimulated with its self-resonance. By pushing the probe, the vibration frequency is reduced depending on the hardness of the surface and on the e module of the material and of the contact surface. The hardness of the surface can be determined on the basis of the frequency shift, taking the characteristic curve of the material into consideration. The UCI hardness tester works non-destructively. There is a microscopically slight pressure against the surface, however, this is normally not visible. Due to the low penetration depth of the Vickers diamond, this UCI hardness tester is especially suitable for edge layer hardened components such as, for example, those that emerge when nitriding or induction hardening. It is typically used for punching tools, presses, thin-walled components, cog wheels, turbine blades, camshafts or weld seams. The UCI hardness tester is also suitable for many other hardness testing applications. It has exchangeable probes with different pressure forces and can therefore cover diverse applications. After measuring the hardness of a component, the UCI hardness tester shows different statistical values such as the MAX / MIN values and average values. Moreover, the standard deviation and further coefficients can be determined. A bar chart can be indicated. Since the UCI hardness tester is equipped with an internal memory, the measured data can be evaluated by means of a software.

The UCI hardness tester has been designed for the non-destructive hardness measurement of metallic components. The UCI hardness tester works on the basis of the Ultrasonic Contact Impedance test procedure. This UCI procedure works as follows: a Vickers diamond at the probe is stimulated with its self-resonance. By pushing the probe, the vibration frequency is reduced depending on the hardness of the surface and on the e module of the material and of the contact surface. The hardness of the surface can be determined on the basis of the frequency shift, taking the characteristic curve of the material into consideration. The UCI hardness tester works non-destructively. There is a microscopically slight pressure against the surface, however, this is normally not visible. Due to the low penetration depth of the Vickers diamond, this UCI hardness tester is especially suitable for edge layer hardened components such as, for example, those that emerge when nitriding or induction hardening. It is typically used for punching tools, presses, thin-walled components, cog wheels, turbine blades, camshafts or weld seams. The UCI hardness tester is also suitable for many other hardness testing applications. It has exchangeable probes with different pressure forces and can therefore cover diverse applications. After measuring the hardness of a component, the UCI hardness tester PCE-35 shows different statistical values such as the MAX / MIN values and average values. Moreover, the standard deviation and further coefficients can be determined. A bar chart can be indicated. Since the UCI hardness tester is equipped with an internal memory, the measured data can be evaluated by means of a software.

The UCI hardness tester has been designed for the non-destructive hardness measurement of metallic components. The UCI hardness tester works on the basis of the Ultrasonic Contact Impedance test procedure. This UCI procedure works as follows: a Vickers diamond at the probe is stimulated with its self-resonance. By pushing the probe, the vibration frequency is reduced depending on the hardness of the surface and on the e module of the material and of the contact surface. The hardness of the surface can be determined on the basis of the frequency shift, taking the characteristic curve of the material into consideration. The UCI hardness tester works non-destructively. There is a microscopically slight pressure against the surface, however, this is normally not visible. Due to the low penetration depth of the Vickers diamond, this UCI hardness tester is especially suitable for edge layer hardened components such as, for example, those that emerge when nitriding or induction hardening. It is typically used for punching tools, presses, thin-walled components, cog wheels, turbine blades, camshafts or weld seams. The UCI hardness tester is also suitable for many other hardness testing applications. It has exchangeable probes with different pressure forces and can therefore cover diverse applications. After measuring the hardness of a component, the UCI hardness tester PCE-35 shows different statistical values such as the MAX / MIN values and average values. Moreover, the standard deviation and further coefficients can be determined. A bar chart can be indicated. Since the UCI hardness tester is equipped with an internal memory, the measured data can be evaluated by means of a software.

The sound level meter is a small handheld device with many functions such as peak measurement, Leq value calculation and adjustable measuring ranges. In addition, the sound level meter can freeze the largest measured value with the MAX function so that you can really judge whether a limit has been exceeded. The special feature of the sound level meter is the Leq value which, after entering a time, displays the equivalent continuous sound level, i.e. the time average of all sound events within an observation period. The memory function offers 99 locations which can only be called up via the sound level meter. The backlit display makes reading easy, after 10 minutes without operation the sound level meter switches off automatically. A battery symbol indicates when the three AAA batteries need to be changed. The class 2 sound level meter is used in the workplace, e.g. for noise protection of employees or simply for quick measurement of ambient noise.

The Color Viewing Box is a simulation instrument which is mainly used in quality control. The Color Viewing Box accurately simulates illuminants and thus enables the direct comparison of products which must have special colour characteristics. The Color Viewing Box supports six possible illuminants. These illuminants are included as standard: "A/F", "D65", "TL84/F11", "UV", "CWF" and "TL83/U30". Metamerism can thus be avoided by using a Color Viewing Box. As a support during the measurement, the Color Viewing Box has an hour counter which makes it easier for the user to adhere to the recommended operating time of the lamps. The illuminant is selected by the user independently by the touch of a key. In addition to the individual light, it is also possible to switch to mixed light by pressing the required keys at the same time.

The sound level meter is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The sound level meter is a class 2 device and is equipped with an octave band frequency filter. The sound level meter can optionally be upgraded with a 1/3 octave band filter. In addition to the numerical display of the measured value, a graph can show the course of the sound level. The sound level meter has various frequency weightings such as A, B, C and Z. The sound meter can also display measurements with the time weightings Fast, Slow, Impulse and Peak. The measuring range of the sound level meter extends from 25 ... 136 dbA at a frequency of 2 Hz ... 12.5 kHz. 3 different measurement profiles can be stored in the sound level meter. Here the user can decide which parameters the sound level meter should record. For example, you can choose between Laeq, LcPeak, LaFmax, LaFMin, etc. The peak hold function in the sound level meter makes it possible to record the maximum sound pressure level during long-term measurements and freeze it in the display. A 24 bit AD converter and the specially developed electronics of the sound level meter help to reduce the inherent noise to a very low level. Sampling the measurement signal with more than 48 kHz enables high accuracy and improved stability of the measurement value on the sound level meter.

The class 1 sound level meter meets all the requirements for noise measurement and frequency analysis. This integrating precision pulse sound level meter complies with all applicable standards and guidelines (Class 1 EN / IEC 61672, ANSI S1.4-1983, ANSI S1.43-1997 EN / IEC61260, etc.). The sound level meter has a very large illuminated display. The display of the sound level meter shows the sound pressure level numerically and graphically in real time. The professional sound level meter has an integrated data logger. The measurement data are saved on a micro SD card. This card can be read out directly in the PC. The sound level meter can also be connected to the PC via USB and the memory can be read out. The post-processing software of the sound level meter allows convenient measurement data analysis. The typical areas of application for this device are in the measurement of workplace noise, compliance with regulations, determination of environmental noise, selection of hearing protection Protector Selection, selection of suitable noise control measures and estimation of noise exposure. The impulse function of enables short-term sound events to be recorded. Thanks to the integrated octave band function, even the slightest differences in the frequency band can be determined here. The frequency filter can be optionally upgraded. The measuring range of this professional sound level meter extends from 22 ... 136 db (A) at a frequency of 3 Hz ... 20 kHz.

The Class 1 Sound Level Meter meets all the requirements for noise measurement and frequency analysis. In addition to the sound measurement function, the Sound Level Meter is equipped with a GPS receiver. The GPS function allows the user to assign the measured values ​​to an exact position. This integrating precision pulse Sound Level Meter complies with all applicable standards and guidelines (Class 1 EN / IEC 61672, ANSI S1.4-1983, ANSI S1.43-1997 EN / IEC61260, etc.). The Sound Level Meter has a very large illuminated display. The display of the Sound Level Meter shows the sound pressure level numerically and graphically in real time. The professional Sound Level Meter has an integrated data logger. The measurement data are saved on a micro SD card. This card can be read out directly on the PC. The Sound Level Meter can also be connected to the PC via USB and the memory can be read out. The post-processing software of the Sound Level Meter allows convenient measurement data analysis. The typical areas of application for this device are the measurement of workplace noise, compliance with regulations, determination of environmental noise, selection of hearing protection Protector Selection, selection of suitable noise control measures and estimation of noise exposure. The impulse function of the Sound Level Meter enables short-term sound events to be recorded. Thanks to the integrated octave band function, even the slightest differences in the frequency band can be determined here. The frequency filter can be optionally upgraded. The measuring range of this professional Sound Level Meter extends from 22 ... 136 db (A) at a frequency of 3 Hz ... 20 kHz.

The analytical balance is a high-precision analytical balance with a measuring range of up to 220 g. The analytical balance has a resolution of 0.1 mg. Due to this low resolution, even the smallest air turbulence in a room can influence the weighing result of the analytical balance. To counteract this, the analytical balance is equipped with a draft shield. This makes the analytical balance with touchscreen ideal for laboratory use. In order to carry out a precise weighing with the analytical balance, the draft shield is opened, the weighing sample is placed on the platform and then the draft shield is closed. The weighing plate of the touch screen scales has a diameter of 80 mm, so that aluminum sample or Petri dishes used in the laboratory fit exactly on the weighing pan. To ensure the long-term accuracy of the analytical balance, the balance is equipped with an internal calibration function. For the user of the touch screen analytical balance, a single point calibration & multi-point calibration with external weights, as well as a quick calibration with internal calibration weight are available. It often happens that the surface of the measurement setup is not even. Thanks to the built-in spirit level and the adjustable feet, the analytical balance can also be set and aligned on sloping surfaces. The built-in RS232 interface allows a direct connection between the touchscreen analytical balance and a PC. Thus, the measured data can be transferred from the analytical balance directly to the PC and evaluated. A special feature of the analytical balance is the large LCD touch screen. The weighing result is shown here in large numbers on the 5" LC display in units of g, oz, ct and mg. The flat surface of the touchscreen, without mechanical buttons, makes it easier to clean the analytical balance, especially in laboratory applications.

With a resolution of 0.1 mg, this checkweighing scale is ideally suited for checking small samples for their weight. For example, powder can be weighed with the fine scale. Typical areas of application for the checkweighing scale are therefore in laboratories or in research facilities. Weighing the smallest samples is very difficult because even a small gust of wind falsifies the measured value. For this reason, a wind shield is installed around the weighing surface of the checkweighing scale. This ensures that even the smallest gusts of wind have no effect on the measurement of the checkweighing scale. The checkweighing scale can be connected directly to a PC via the RS232 interface. With the optionally available software for the checkweighing scale, the measurement data can be presented in a table. A graphic representation of the measured values ​​from the checkweighing scale is also possible with the software. There is also the option of exporting the measured values ​​recorded by the checkweighing scale. In this way, the measured values ​​of the checkweighing scale can be conveniently incorporated into presentations, sent by email or simply printed out. If necessary, the checkweighing scale can be checked with the calibration weight supplied. This ensures that the checkweighing scale delivers a perfect measurement result. The checkweighing scale can also be adjusted by the operator in a very short time using the calibration weight. With the built-in bubble level, the current positioning of the checkweighing scale can be determined at an installation location. If the positioning of the checkweighing scale is not suitable, this can be readjusted using the height-adjustable feet. This ensures that the checkweighing scale is properly aligned with the current installation location.

The clamp force tester is a 4-point force meter that can ensure the optimal clamp force distribution. For the transport of white goods (refrigerators, washing machines, etc.) and brown goods (consumer electronics), larger and larger large area clamps are being used. The aim is to be able to move as many goods as possible safely in one work step. To ensure this, the clamp arms are designed with multiple adjustment points, giving the user the ability to evenly distribute the clamping force across the load. The device clamp tester was developed precisely for this purpose. The clamp force tester simultaneously determines the compressive forces / clamp forces that occur at 4 different measuring points. Each of these 4 force sensors can record a maximum force of up to 3t. The force is shown on the color display of the 4-point measuring carriage with a resolution of 1 kg. The force of each individual sensor and the totals of several sensors are displayed and also shown as a percentage in relation to the total force. The forces can be displayed in kg / N / kN and lb. In this way, the user can quickly and easily check and adjust the force distribution of the large area clamp. The operator and the device clamp identification number can be entered in the clamp force tester, which can then be printed out with the measured values ​​and optionally saved on a USB stick in tabular form. This helps in documenting the checked device clips and is used by many service providers in calibration as well as regular recalibration. Another function of the measuring carriage is the possibility of setting a target value for the respective measuring point and the total force. If this value falls below or is exceeded, the display shows this in color and can quickly point out a problem to the operator. The four measuring points of the force tester can be easily moved and can thus be adapted to the different attachments. The device clamp tester is operated with a rechargeable battery, which enables mobile use. The four-point tester gives you the opportunity to quickly and easily check the settings on the device clamp and adjust them if necessary in order to avoid damage to the goods to be transported due to incorrect distribution of force.

With the hygrometer it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60°C / 140 °F are possible with the environmental measuring device. The environmental measuring device can therefore be used universally because of its various measuring functions in order to determine the environmental conditions. With a high accuracy of ± 0.5 °C and ± 3.5% RH. the environmental measuring device determines the current measured value very precisely. The environmental measuring device is used, for example, to check the climatic conditions in offices, cold rooms or in greenhouses. The hygrometer with Bluetooth interface can establish a direct connection to an Android or iOS device. This makes it possible to expand the environmental measuring device with a mobile device. With the free “MeterboxPro” app, the measured values ​​from the environmental measuring device can then be displayed in a table or graph on an Android or iOS system. At the same time, they act as data loggers. The recorded measurement data are saved in CSV file format after a measurement.

The air flow meter enables wind speed measurements up to 105 km/h and is versatile in use. The air flow meter is equipped with an integrated temperature sensor that measures both Celsius and Fahrenheit. The functions for maximum and average wind speed enable effective monitoring of the measurement results. The air flow meter enables measurements in various units such as m/s, km/h, kn and mph and also has a Beaufort scale for quick assessment of the wind force. The easy-to-read LCD display with backlighting ensures optimum readability in all lighting conditions. The automatic switch-off function after 15 minutes of inactivity extends the battery life to at least approx. 30 hours. The air flow meter is supplied with a practical carrying case for travelling.

The Force Gauge / Digital Force Gauge is a portable, hand-operated device that measures the force required to pull a specifiic test diameter of coating from the substrate using hydraulic pressure. The measured pressure is displayed on the 5-inch touch screen and represents the adhesion strength of the coating to the substrate. This device evaluates the adhesion (peel strength) of a coating by determining the maximum tensile force it can withstand before it peels off. The Force Gauge / Digital Force Gauge visualises fractures caused by cracks along the weakest layer in the system of carrier, adhesive, coating layers and substrate. Equipped with an electronically controlled hydraulic pump, our Force Gauge / Digital Force Gauge enables precise and repeatable application of the required tensile force. Thanks to the selection of different dolly sizes, the device can be flexibly adapted to different test requirements, making it particularly versatile. The pulling speed, load limit and holding time can be customised to meet specific requirements for different materials and applications. In addition, the Force Gauge / Digital Force Gauge offers a USB interface for easy transfer of measurement data to external devices. The data can be saved in practical CSV format for easy further processing and analysis. You can find additional and replacement measuring heads as well as the right base for your needs in the accessories.

With the Abbe refractometer you get a measuring device for fast and precise determination of the refractive index nD between 1.300 and 1.700. The Abbe refractometer also measures the sugar content of translucent liquids, dispersions, emulsions or other substances. Using the supplied thermometer, the refractive index can be determined for a temperature range of 0 ... 70°C / 32 ... 158°F. In order to control the temperature of the device, adapters for water hoses are attached to both sides of the Abbe refractometer on the upper and lower prism holders, which allow temperature control by means of an external thermostat. With this Abbe refractometer you can e.g. carry out an exact determination of the sugar content in the range 0 ... 95% (1.333 ... 1.531). The area of ​​application is much wider: measurement and analysis of fats, oils, paints, varnishes, foodstuffs, chemical substances, alcohol and solvents. How does an Abbe refractometer work? A refractometer serves as a measuring device with which you can determine the refractive index. This works with both liquid and solid substances, as long as they are transparent, with the help of refractometry. After the sample has been applied to the refractometer, special optics in the refractometer create opposite light-dark fields, the borderline between the two fields is the measurement result of the sample. Roughly speaking, one can differentiate between three measuring methods of a refractometer: - Transmitted light - Grazing incidence - Total reflection For this purpose, the refraction, i.e. the refraction or total reflection of the light and its physical properties are used. The common denominator of the three measuring principles presented is the measuring prism with a known refractive index. Light has the property that it does not move at the same speed at the transition between the measuring prism and the sample medium, but propagates at different speeds. The unknown refractive index of the medium to be measured is measured via the light deflection. - With the transmitted light principle, a parallel beam of light is refracted at the interface between the two media. - In the case of grazing incidence and total reflection, the critical angle of a beam is measured with different angles of incidence on the interface. The measurement result is most accurate at 20°C / 68°F, so the temperature should always be determined and the distortions determined using a correction table. However, there are also refractometers that have an automatic temperature correction which of course greatly increases the measuring comfort. What is the Abbe refractometer used for? Many applications aim to determine the concentration in a carrier medium. A traditional example is the determination of the sugar content in mostly aqueous solutions. For example, by determining the sugar concentration of a grape, its degree of ripeness can be determined, which makes it interesting for winemakers. The refractometer can also measure the original wort when brewing beer and the water content in honey. But a refractometer can also be a real aid in industry, for example the oil-water concentration in cooling emulsion mixtures in metalworking machines or the acid concentration in batteries can be determined. A refractometer can also be found in medicine, for example the protein content in urine can be measured. There are many other areas of application in which a refractometer is useful and greatly simplifies work. In order to ensure comparability of the results, separate scales have now been established (degrees Oechsle, degrees Brix, degrees Plato). Refractometers are mostly equipped with the double scale % mas sucrose (Brix)/°Oe or triple scale % mas sucrose (Brix)/°Oe/KMW-Babo. The % mas sucrose (Brix) scale is valid internationally. The Oechsle scale 0-140°Oe is valid for fruit juices, foreign grape musts and distilling mashes. For German grape musts only the Oechsle scale 30-140°Oe is valid. Refractometers with this scale are marked with a "D".

The analytical balance is a high-precision analytical balance with a measuring range of up to 220 g. The analytical balance has a resolution of 0.1 mg. Due to this low resolution, even the smallest air turbulence in a room can influence the weighing result of the analytical balance. To counteract this, the analytical balance is equipped with a draft shield. This makes the analytical balance with touchscreen ideal for laboratory use. In order to carry out a precise weighing with the analytical balance, the draft shield is opened, the weighing sample is placed on the platform and then the draft shield is closed. The weighing plate of the touch screen scales has a diameter of 80 mm, so that aluminum sample or Petri dishes used in the laboratory fit exactly on the weighing pan. To ensure the long-term accuracy of the analytical balance, the balance is equipped with an internal calibration function. For the user of the touch screen analytical balance, a single point calibration & multi-point calibration with external weights, as well as a quick calibration with internal calibration weight are available. It often happens that the surface of the measurement setup is not even. Thanks to the built-in spirit level and the adjustable feet, the analytical balance can also be set and aligned on sloping surfaces. The built-in RS232 interface allows a direct connection between the touchscreen analytical balance and a PC. Thus, the measured data can be transferred from the analytical balance directly to the PC and evaluated. A special feature of the analytical balance is the large LCD touch screen. The weighing result is shown here in large numbers on the 5" LC display in units of g, oz, ct and mg. The flat surface of the touchscreen, without mechanical buttons, makes it easier to clean the analytical balance, especially in laboratory applications.

The signal transducer for ... 1 V converts voltage signals into standard electricity signals. The power of the signal transducer for ... 1 V is supplied via a current loop. Each sensor or transducer with to 1 V output can be connect to the input of the signal transducer. The output of the signal transducer to 1 V can be connect to displays, controllers or screen recorders. It should be noted that the load is no bigger than 5 Ω. Due to the small installation dimensions of only 6.2 mm, the signal transducer for ... 1V signals fits onto any DIN rail mounting.

The innovatively designed digital thermometer is a large display for monitoring the indoor air quality. This CO2 measuring device is used specifically to monitor indoor air quality in large rooms. These include, for example, meeting rooms, lounges or public spaces such as classrooms and kindergartens. Due to the large size of 388 x 288 x 43 mm, the CO2 indicator can also be easily read from a greater distance. With the wall bracket for the CO2 indicator, the large display can also be mounted anywhere on walls. The NDIR CO2 sensor built in for the measurement has a measuring range of 9999 ppm. In addition to the high measuring range of the built-in NDIR CO2 sensor, the special feature of the CO2 measuring device is that the CO2 sensor does not require any maintenance. A temperature and a humidity sensor are also integrated in the CO2 measuring device in order to monitor the climatic conditions. The CO2 measuring device also has a bar graph with which the measured CO2 content can be displayed graphically. The bar graph on the CO2 indicator is also divided into the colors green, yellow and red, which light up at fixed measured values ​​depending on the CO2 content. This makes it easier to assess the carbon dioxide in the environment so that ventilation measures can be carried out if necessary. To alert you to an excessively high CO2 concentration, the CO2 measuring device has an adjustable acoustic alarm, which is factory set to a concentration of 1200 ppm CO2.

The Material Tester is mainly used to determine the ash content of plastics. The device can intelligently control time and temperature in the individual sections of the heating process. It is suitable for determining the ash content in polyethylene, polypropylene and polybutene plastics. The ash content of plastic samples (plastics, plastic composites) is accessible as a mass or mass fraction after direct annealing of the sample. The sample is burnt by the Material Tester at high temperatures. Subsequent annealing ensures that the combustion residue has been completely converted into ash that cannot be burnt any further. The Material Tester supports tests in accordance with the international standards ISO 3451 and GB/T9345.1-2008. Equipped with a modern 8-inch capacitive touch screen, the Material Tester enables intuitive operation and a clear display of the measurement results. The cylindrical heating chamber ensures an even distribution of the temperature, which leads to particularly accurate measurements. Thanks to the programmable temperature control, the heating process can be flexibly adapted to the specific requirements of the respective test. A high-temperature heating rod ensures that the required temperatures are reached quickly and kept constant. In addition, the heating time is shown on the display of the Material Tester, which enables precise monitoring of the entire process and helps the user to maintain complete control of the test procedure at all times. The Material Tester is ideal for plastics processing, scientific research departments of manufacturing companies and universities. A high ash content can indicate impurities or unwanted materials that have entered the plastic during production. During the recycling process of plastics, the ash content is measured to determine the purity of the recycled material and ensure that it is suitable for further use.

This handy Alcohol meter / Breathalyzer quickly measures the alcohol content and is very easy to use. Our Alcohol meter / Breathalyzer has a measurement range of 0 ... 4 g/l. Its lightweight and compact design makes it particularly user-friendly. After blowing, the digital result is shown on the OLED display within a few seconds. The Alcohol meter / Breathalyzer is equipped with a fuel cell sensor. The measuring units can be flexibly switched between mg/l, g/l, % BAC and ‰ BAC. The history of the last measured values is displayed in the app. An adjustable alarm value in the Alcohol meter / Breathalyzer provides additional safety while the special anti-backlflow mouthpiece protects your health. The OLED display ensures clear readability of the results. The Alcohol meter / Breathalyzer is ideal for use in the car, at home or on the go at events.

The small Alcohol meter / Breathalyzer is ideal for travelling: compact and easy to use. Our Alcohol meter / Breathalyzer has a measurement range of 0 ... 1 g/l. The Alcohol meter / Breathalyzer is perfect for a quick self-test to be on the safe side. After blowing against the sensor for six seconds, the approximate alcohol content appears on the display. The measured values appear both as a numerical value and in the form of a traffic light display, optionally in g/l or mg/l. The sensor is designed for up to 1500 measurements and the remaining life of the sensor is also displayed. Thanks to the internal memory, up to 50 values can be saved in our Alcohol meter / Breathalyzer. The Alcohol meter / Breathalyzer is powered by AAA batteries which are easy to replace and available anywhere.

The multifunction air flow meter is the ideal solution for measuring wind speeds, whether in light breezes or strong wind currents, and can measure speeds of up to 55 km/h. Versatile in use, it enables measurement in various units such as m/s, km/h, kn, mph and ft/min and also integrates the Beaufort scale to enable a quick assessment of wind force. In addition to wind speed measurement, the multifunction air flow meter also offers functions for temperature and humidity measurement. These three parameters are shown simultaneously on the display, providing the user with a clear and simple visualisation. With additional functions such as MAX, MIN, HOLD and AVG, the multifunction air flow meter makes it easier to record important data. The automatic switch-off function helps to extend battery life, with the device being powered by a standard CR2032 battery, which ensures an operating time of around 88 hours. The multifunction air flow meter is supplied with a wrist strap and carrying case.

An air sampling meter used to assess microbiological pollution and monitor hygiene. Designed for use in hospitals, clean rooms and food and beverage, cosmetics and pharmaceutical production facilities, the PCE-AS1 Air Sampler meets the latest requirements for devices used for airborne microbial analysis. Optional ISO calibration lab certificate as an accessory. The Air Sampler uses the aerosol impaction principle or Andersen collision principle to assess air quality. The air taken in at the top of the instrument is pulled through 300 micropores and the resulting laminar air flow is directed onto the surface of an agar petri dish. When the sampling cycle is complete, the petri dish is removed and incubated. The bacterial and fungal counts can then be assessed in accordance with USP 797 and CAG-009 guidance. The collecting head should be sterilized in an autoclave at 121°C / 249.8°F for 30 minutes (sterilization with a cloth with 75% alcohol is also possible.) The petri dish should also be sterilized with 75% alcohol.

The ATP Tester with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The ATP Tester displays a measurement result on the large LC display after only 10 seconds. The ATP Tester's internal memory stores up to 10,000 measured data sets with time and date. The ATP Tester with the associated PCE-ATP SwapPens, allows a quick detection of food or microbiological residues on all surfaces in contact with the product as an effectiveness test of cleaning and disinfection measures. Quantitative determination of intracellular and extracellular adenosine triphosphate (ATP) is performed in the portable ATP Tester. The measured data from the ATP Tester can be stored and further processed after the measurement. The ATP Tester is used in the hygiene control in pharmacy, medicine, gastronomy, wholesalers and more. The measurements with the ATP Tester are carried out with the specially available ATP test tubes. With the swab contained in the tube, the surface is sampled. The swab is then pressed all the way down into the tube, whereby it comes into contact with the reaction liquid and the actual reagent. By gentle shaking, the reaction liquid collects in the reaction chamber of the tube. The entire test tube is then inserted into the measuring chamber of the ATP Tester. Then the measurement is started. After 10 seconds, the measurement result is displayed in RLU (Relative Light Units) on the display of the ATP Tester. The ATP Tester can be used in different business branches. Thus, the ATP Tester enables complete control and documentation in the food industry. This can be in the control of cleanliness in a large kitchen or in the processing of food in large industrial enterprises. The ATP Tester helps to implement the HACCP concept. In addition to the application in the food industry, the hygiene tester can also be used by cleaning companies to provide evidence of cleaning services. The memory of the ATP Tester documents the time of the measurement with date and time. Furthermore, different users can be added to differentiate the measurement data. In addition, the ATP Tester finds its application in the field of health care. Wherever the cleanest surfaces and sterility are required, the luminometer can be used to quickly control cleanliness.

The ATP Testing Meter with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The Food / Hygiene ATP Testing Meter displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the Food / Hygiene ATP Testing Meter. The ATP Testing Meter with the associated PCE-ATP Surface Swab Pens, allows a quick detection of food or microbiological residues on all surfaces in contact with the product as an effectiveness test of cleaning and disinfection measures. Quantitative determination of intracellular and extracellular adenosine triphosphate (ATP) is performed in the portable ATP Testing Meter. The measured data from the Food / Hygiene ATP Testing Meter can be stored and further processed after the measurement. The Food / Hygiene ATP Testing Meter is used in the hygiene control in pharmacy, medicine, gastronomy, wholesalers and more. The measurements with the Food / Hygiene ATP Testing Meter are carried out with the specially available ATP test tubes. With the swab contained in the tube, the surface is sampled. The swab is then pressed all the way down into the tube, whereby it comes into contact with the reaction liquid and the actual reagent. By gentle shaking, the reaction liquid collects in the reaction chamber of the tube. The entire test tube is then inserted into the measuring chamber of the ATP Testing Meter. Then the measurement is started. After 10 seconds, the measurement result is displayed in RLU (Relative Light Units) on the display of the Food / Hygiene ATP Testing Meter. The ATP Testing Meter can be used in different business branches. Thus, the Food / Hygiene ATP Testing Meter enables complete control and documentation in the food industry. This can be in the control of cleanliness in a large kitchen or in the processing of food in large industrial enterprises. The ATP Testing Meter helps to implement the HACCP concept. In addition to the application in the food industry, the hygiene tester can also be used by cleaning companies to provide evidence of cleaning services. The memory of the ATP Testing Meter documents the time of the measurement with date and time. Furthermore, different users can be added to differentiate the measurement data. In addition, the ATP Testing Meter finds its application in the field of health care. Wherever the cleanest surfaces and sterility are required, the luminometer can be used to quickly control cleanliness.

The ATP Testing Meter with 200 swabs included is used to quickly and easily check the cleanliness of surfaces and water. The Food / Hygiene ATP Testing Meter displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the Food / Hygiene ATP Testing Meter. The ATP Testing Meter with the associated PCE-ATP Surface Swab Pens, allows a quick detection of food or microbiological residues on all surfaces in contact with the product as an effectiveness test of cleaning and disinfection measures. Quantitative determination of intracellular and extracellular adenosine triphosphate (ATP) is performed in the portable ATP Testing Meter. The measured data from the Food / Hygiene ATP Testing Meter can be stored and further processed after the measurement. The Food / Hygiene ATP Testing Meter is used in the hygiene control in pharmacy, medicine, gastronomy, wholesalers and more. The measurements with the Food / Hygiene ATP Testing Meter are carried out with the specially available ATP test tubes. With the swab contained in the tube, the surface is sampled. The swab is then pressed all the way down into the tube, whereby it comes into contact with the reaction liquid and the actual reagent. By gentle shaking, the reaction liquid collects in the reaction chamber of the tube. The entire test tube is then inserted into the measuring chamber of the ATP Testing Meter. Then the measurement is started. After 10 seconds, the measurement result is displayed in RLU (Relative Light Units) on the display of the Food / Hygiene ATP Testing Meter. The ATP Testing Meter can be used in different business branches. Thus, the Food / Hygiene ATP Testing Meter enables complete control and documentation in the food industry. This can be in the control of cleanliness in a large kitchen or in the processing of food in large industrial enterprises. The ATP Testing Meter helps to implement the HACCP concept. In addition to the application in the food industry, the hygiene tester can also be used by cleaning companies to provide evidence of cleaning services. The memory of the ATP Testing Meter documents the time of the measurement with date and time. Furthermore, different users can be added to differentiate the measurement data. In addition, the ATP Testing Meter finds its application in the field of health care. Wherever the cleanest surfaces and sterility are required, the luminometer can be used to quickly control cleanliness.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The digital universal indicator is designed in such a way that the measured values ​​displayed can be read from a large distance. With a digit height of 6 mm or 1 mm, the reading distance for the digital universal indicator is 25 m / 82 ft or 50 m / 164 ft. The red LEDs of the digital universal indicator enable reading of the measured values ​​even in very bright surroundings. The housing of the digital universal indicator is made of metal and is splash-proof with IP65. Thus, the digital universal indicator can be used under harsh environmental conditions. Many different variants are available as input signals for digital universal indicators. Among other things, the industry supports digital displays 4 ... 2 mA and pulses. The digital universal indicator is configured directly via the keypad. Digital display output interfaces are optionally available for industry. This makes it possible to switch process signals and pulses via the digital universal indicator when a limit value is reached, for example. The digital universal indicator can be aligned vertically for optimal alignment when mounted on the wall. In addition to wall mounting, the digital universal indicator can be mounted on a control cabinet. The insulation on the housing of the digital universal indicator ensures that no water can get into the control cabinet.

The drive belt tension meter is an optical measuring device for determining the belt tensioning force. This belt tension meter consists of a display device and a sensor on a gooseneck. The belt tension meter measures the belt tension of the belt when it is stationary. A small impulse with the help of a mallet is enough to set the belt vibrating. The belt tension meter uses a sensor beam to record the natural frequency of the belt generated in this way and visualize it on the display. Furthermore, the belt tension meter can directly determine the tensioning force of the belt from this measurement data, as well as the entered belt length and belt mass. However, entering this data is not absolutely necessary in order to carry out measurements directly with the belt tension meter. The units of measurement can be switched between N (SI unit) and pound force (US unit) in the tension meter. The measured value is always shown in Hz on the graphic display of the drive belt tension meter. If the belt mass and length are entered in the device, the strand force is also displayed in Newtons. The intuitive graphic menu is visualized on the high-contrast display of the strand force measuring device in 6 selectable languages. The drive belt tension meter is equipped with a memory for further analysis and quality assurance purposes. In the memory of the belt tension meter, up to 750 data records can be stored in 15 folders with 50 measured values ​​each. The belt tension meter is delivered completely ready for use. The scope of delivery includes the hand-held device, the standard sensor with gooseneck, a magnetic holder, batteries and operating instructions. An instrument case, frequency mallet, tripod and a measuring sensor with a spiral cable and a longer gooseneck (for hard-to-reach belts) are available as options for the tension meter. Why should the belt force be measured? The measurement of belts is always necessary when machines and systems are to be optimally maintained. A belt drive only achieves its maximum service life if it is designed for use. This means that the belt is optimally tensioned and the pulleys are precisely aligned. With the help of the belt tension measuring device, the tensioning force can be precisely determined when the belt is stationary.

The drive belt tension meter is an optical measuring device for determining the belt tensioning force. This belt tension meter consists of a display device and a sensor on a gooseneck. The belt tension meter measures the belt tension of the belt when it is stationary. A small impulse with the help of a mallet is enough to set the belt vibrating. The belt tension meter uses a sensor beam to record the natural frequency of the belt generated in this way and visualize it on the display. Furthermore, the belt tension meter can directly determine the tensioning force of the belt from this measurement data, as well as the entered belt length and belt mass. However, entering this data is not absolutely necessary in order to carry out measurements directly with the belt tension meter. The units of measurement can be switched between N (SI unit) and pound force (US unit) in the tension meter. The measured value is always shown in Hz on the graphic display of the drive belt tension meter. If the belt mass and length are entered in the device, the strand force is also displayed in Newtons. The intuitive graphic menu is visualized on the high-contrast display of the strand force measuring device in 6 selectable languages. The drive belt tension meter is equipped with a memory for further analysis and quality assurance purposes. In the memory of the belt tension meter, up to 750 data records can be stored in 15 folders with 50 measured values ​​each. The belt tension meter is delivered completely ready for use. The scope of delivery includes the hand-held device, the standard sensor with gooseneck, a magnetic holder, batteries and operating instructions. An instrument case, frequency mallet, tripod and a measuring sensor with a spiral cable and a longer gooseneck (for hard-to-reach belts) are available as options for the tension meter. Why should the belt force be measured? The measurement of belts is always necessary when machines and systems are to be optimally maintained. A belt drive only achieves its maximum service life if it is designed for use. This means that the belt is optimally tensioned and the pulleys are precisely aligned. With the help of the belt tension measuring device, the tensioning force can be precisely determined when the belt is stationary.

The water analysis meter chlorine tester with a measuring range of 0 ... 10 mg/l has been developed for rapid chlorine measurement in water. The display of the chlorine analysis meter shows the chlorine content and the temperature. The measurement result appears on the display within a few seconds after the test and can also be frozen. In addition, the water analysis meter shows a symbol in the display when the measured value is stable. The measuring accuracy of the water analysis meter chlorine tester is increased by an automatic temperature compensation. The automatic switch-off function after 20 minutes extends the battery life of the water analysis meter. Because the water analysis meter chlorine tester is small and handy, it is ideally suited for mobile use. Thus, the water analysis meter can be easily used in the swimming pool. The water analysis meter is very simple and understandable to operate, as all buttons are marked with the respective parameter.

A Color Viewing Box is used wherever products need to have the same colour characteristics during production. Thus, a Color Viewing Box contributes to quality control. The Color Viewing Box is a simulation tool which is capable of representing certain situations in order to analyse the colour characteristics of individual samples. The Color Viewing Box supports six possible illuminants. These illuminants are included as standard: "A/F", "D50", "TL84/F11", "UV", "CWF" and "TL83/U30". Metamerism can thus be avoided by using a Color Viewing Box. As a support during the measurement, the Color Viewing Box has an hour counter which makes it easier for the user to adhere to the recommended operating time of the lamps. The illuminant is selected by the user independently by the touch of a key. The keys are located on the front side of the Color Viewing Box. If desired, several illuminants can also be enabled simultaneously in the Color Viewing Box. This is done by pressing the respective keys simultaneously.

The panel indicator has a RS485 Modbus interface. This panel indicator can display the measured data of up to 10 slave devices or registers. As a built-in display, the panel indicator has a 3.5" LCD display. Here individual measured values ​​and also several measured values ​​can be displayed simultaneously. The digital panel is mounted in a 90.5 x 90.5 mm / 3.6 x 3.6 in panel cut-out. The text before the measured value can be set individually for each query register in the digital Modbus installation display. The front of the panel indicator is protected to IP 65.

The light booth is an important piece of equipment in the printing industry. It allows prints to be checked for color consistency and metamerism immediately after completion. In addition to the printing industry, the light booth is used by advertising agencies, press outlets, and publishing houses, as well as wherever large formats require visual inspection. The positioning of the light on the light booth ensures optimal illumination of the desk and the back wall. This allows both a horizontal and a vertical surface to be used as a viewing plane. To monitor the lighting time of each of the three light types: daylight D75, D65, and D50, a separate operating hour counter with a reset function is provided. The LED bulbs require replacement only after 8,000 hours of operation. The light types can be switched on individually or as a mixed light. The four braked casters allow for flexible use of the light booth at different locations. Metamerism in general refers to the fact that the same colors can look different when exposed to different lighting or different positioning.

A Color Viewing Box enables the user to make direct visual colour comparisons of products that are to be produced or are already in production. Colour comparisons in a Color Viewing Box are important for a company that aims to offer products of high and consistent quality. The Color Viewing Box supports four different illuminants. The illuminants are previously defined light sources such as daylight, store light, UV light and incandescent lamps. The Color Viewing Box can be used to prevent metamerism before the product goes into series production, for example. The Color Viewing Box also forms an important part of quality assurance. In this way, it can also be checked during the production of products whether the colour values are still within the required range. Metamerism in general refers to the fact that the same colours can look different under different illuminants. The internal operating hours counter of the Color Viewing Box registers the lighting times of the individual lamps and thus ensures that the lamps are not changed too early or too late. The usage time of the lamps in a Color Viewing Box should not exceed 2000 hours. In addition to the operating hours, the switch-on processes for each illuminant in the Color Viewing Box are also counted.

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter photometer. A free app is available to analyze the measured values ​​from the multi-parameter photometer. It is also possible to establish a Bluetooth connection between the multi-parameter photometer and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter photometer, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter photometer is also free of charge.

The cable fault meter represents a powerful and versatile measuring instrument specifically designed for the precise measurement of electrical cables and conductors. With an impressive measurement range from 0.1 meters to an astonishing 30 kilometers, this device can measure and display cable lengths. Since the cable fault meter determines length based on conductor resistance, it can also measure resistance from 0.1 mΩ to 1999.9 Ω. In this measurement principle, it is also necessary to connect the Kelvin clamps to both cable ends. The temperature monitoring function, covering an operating range of -5 to 50°C / 23 to 122°F, allows taking into account the influence of temperature fluctuations on length measurement. The cable fault meter supports the display of cable length in various units, including meters (m), kilometers (km), and feet (ft), to meet the diverse requirements of users and nations. The implementation of 8 memory slots allows the user to individually configure and store cable types for quick access to frequently used settings. This function significantly enhances the practicality of the device. By integrating support for both copper and aluminum cables, the tester opens up applications in various industrial environments. Furthermore, the option to select standard cable types ranging from 0.15 mm² to 240 mm² allows the user to precisely configure according to the specific requirements of their application. The cable fault meter is delivered in a carrying case and comes with two measuring leads, enabling direct use by electricians, in the trade, or many other fields.

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge.

The carbon dioxide meter has a measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the air quality detector also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor. The air quality detector already covers a large range of measuring tasks. The air quality detector is therefore used, for example, in occupational safety to check the climatic conditions in office workplaces. During the measurement, the readings are stored on the carbon dioxide meter. Up to 5000 measuring points can be saved on the air quality detector. The CO² and CO content, as well as the temperature and humidity are saved by the air quality detector for each storage point. After a measurement run, the stored measurement values can be viewed directly on the air quality detector. For further processing, the readings recorded by the carbon dioxide meter can be transferred to a computer. The transfer takes place via the Micro-USB interface of the air quality detector. When connecting the CO and CO² meter to a computer, it is recognized as a mass data storage device. The saved measured values are saved by the air quality detector in CSV file format and can therefore be processed directly. The built-in 1500 mAh battery in the carbon dioxide meter enables mobile use. To charge the battery, the air quality detector can be connected to a 5V DC power supply via the micro-USB interface. The air quality detector can continue to be used during the charging process to take measurements. For an optimal and longer-lasting measurement of the air quality detector there is a 1/4 inch connection on the back. With this connection, the air quality detector can be attached to a tripod and aligned.

The multi-parameter photometer is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. Each measurement is automatically saved by the multi-parameter photometer. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter photometer. A free app is available to analyze the measured values ​​from the multi-parameter photometer. It is also possible to establish a Bluetooth connection between the multi-parameter photometer and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter photometer, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter photometer is also free of charge.

The multi-parameter pH Meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH Meter. With this multi-parameter pH Meter it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH Meter, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter pH Meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample.> Each measurement is automatically saved by the multi-parameter pH Meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH Meter. A free app is available to analyze the measured values ​​from the multi-parameter pH Meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH Meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH Meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH Meter is also free of charge.

The pressure transducer PCE-DMU 40 can be used for relative and absolute pressure measurements. The pressure transmitter can be used for gases, water as well as fuels and oils. Its metallic stainless steel 1.4435 membrane provides good corrosion resistance in many industrial processes. The modular design of the pressure transmitter allows a combination of process connections, pressure ranges and electrical connection variants and therefore meets almost all requirements of industrial applications. The pressure transmitter has an accuracy of 0.25% of the measuring range. Stainless steel is used as the separating membrane.

The multi-parameter pH meter is a mobile measuring device for liquid analysis. This enables the most varied of measurements to be carried out with the multi-parameter photometer. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter pH meter, a water sample of 10 ml must be placed in a cuvette. The built-in LED in the multi-parameter pH meter generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. Each measurement is automatically saved by the multi-parameter pH meter. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter pH meter. A free app is available to analyze the measured values ​​from the multi-parameter pH meter. It is also possible to establish a Bluetooth connection between the multi-parameter pH meter and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter pH meter, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter pH meter is also free of charge.

The hanging scales are available with a measuring range of 0 ... 1000 kg / 0 ... 2205 lbs. With an accuracy of 1% of the measuring range, the dynamometer is a particularly precise measuring device. The housing of the dynamometer is made of robust metal. This means that the dynamometer can be used in a harsh environment. It is operated on the side of the dynamometer via the control panel. For example, the unit can be set or the zero point can be reset using the keypad. With a digit height of 41 mm and the adjustable background lighting, the dynamometer can be read easily from a great distance and in a dark environment. A remote control is included as an extension so that the hanging scales can be operated from a great distance. Additional settings such as the background lighting, the totalizing function or the automatic switch-off of the dynamometer can be made via the remote control. With the additional totalizing function, weights attached one after the other can be displayed totaled by the hanging scales. In addition to the mass units kg and lb, a user-specific unit can be set for the dynamometer. This is done by entering a multiplier based on the kg value measured by the force meter. The energy-saving electronics in the dynamometer enable continuous measurement for approx. 45 hours. The force gauge is equipped with an ISO calibration certificate.

The crane scale has a measuring range of 0 … 1000 kg / 2204 lb and a resolution of 0.1 kg. With an accuracy of 1% of the measuring range, the crane scale is also a precise measuring device. This is why the crane scale is used, for example, when weighing raw materials. The backlit LCD display on the digital crane scale has a digit height of 30 mm and can be easily read from a large distance. In addition to the kg display, the digital crane scale can also display the attached weight in lb and in N. The robust metal housing of the crane scale allows it to be used in harsh industrial conditions. The crane scale is operated by three 1.5V AA batteries. Only the largest weighed load is displayed and held via the "MAX" function of the crane scale. With the "tare" function, the displayed measured value on the crane scale can be zeroed. This function comes into action when, for example, measuring equipment is attached. The "Hold" function of the crane scale enables a displayed measured value to be held. An ISO calibration certificate is included with the crane scale.

The force gage is available with a measuring range of 0 ... 300 kg / 0 ... 661 lbs. With an accuracy of 1% of the measuring range, the dynamometer is a particularly precise measuring device. The housing of the dynamometer is made of robust metal. This means that the dynamometer can be used in a harsh environment. It is operated on the side of the dynamometer via the control panel. For example, the unit can be set or the zero point can be reset using the keypad. With a digit height of 41 mm and the adjustable background lighting, the dynamometer can be read easily from a great distance and in a dark environment. A remote control is included as an extension so that the force gage can be operated from a great distance. Additional settings such as the background lighting, the totalizing function or the automatic switch-off of the dynamometer can be made via the remote control. With the additional totalizing function, weights attached one after the other can be displayed totaled by the force gage. In addition to the mass units kg and lb, a user-specific unit can be set for the dynamometer. This is done by entering a multiplier based on the kg value measured by the force meter. The energy-saving electronics in the dynamometer enable continuous measurement for approx. 45 hours. The force gauge can optionally be equipped with an ISO calibration certificate.

The hanging scales are available with a measuring range of 0 ... 500 kg / 0 ... 1102 lbs. With an accuracy of 1% of the measuring range, the dynamometer is a particularly precise measuring device. The housing of the dynamometer is made of robust metal. This means that the dynamometer can be used in a harsh environment. It is operated on the side of the dynamometer via the control panel. For example, the unit can be set or the zero point can be reset using the keypad. With a digit height of 41 mm and the adjustable background lighting, the dynamometer can be read easily from a great distance and in a dark environment. A remote control is included as an extension so that the hanging scales can be operated from a great distance. Additional settings such as the background lighting, the totalizing function or the automatic switch-off of the dynamometer can be made via the remote control. With the additional totalizing function, weights attached one after the other can be displayed totaled by the hanging scales. In addition to the mass units kg and lb, a user-specific unit can be set for the dynamometer. This is done by entering a multiplier based on the kg value measured by the force meter. The energy-saving electronics in the dynamometer enable continuous measurement for approx. 45 hours. The force gauge can optionally be equipped with an ISO calibration certificate.

The crane scale was developed for in-house weighing of up to 30 t. The crane scale has a massive shackle on the top and a rotatable hook with a safety catch on the underside. The crane scale is operated using the infrared remote control supplied. The 5-digit LED display has a digit height of approx. 75 mm, so that the readings can be read from a distance without any problems. The integrated battery of the crane scale ensures an operating time of over 40 hours. The battery level can be checked at any time. If it is low, the display of the crane scale also starts to flash, so that it is easy for the operator to see when the battery needs to be charged. The crane scale also offers other useful functions. The tare function enables weights to be tared (e.g. slings such as ropes, chains, etc.). If the weight of the objects to be tared is known, this can also be entered manually in advance. Another useful function of the crane scale is the totalizing function. Several weights can be added and the sum read out. The display hold function can also be used to freeze measured values ​​on the display.

This is a portable battery-powered industrial pallet scale or floor scale featuring two heavy-duty parallel weighing beams made of lacquered steel that can be positioned up to 4 m / 13 ft apart. Thus, the adjustable width accommodates multiple pallet, box and container sizes. In addition, the scale's stainless-steel-encased display can be placed up to 4 m / 13 ft away from the weighing beams, allowing for wall mounting.

The Thickness Gauge has a measuring range of 0 ... 2000 µm. The Thickness Gauge can measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals. For a better analysis of the measurements, the coating thickness gauge has a measuring function based on the SSPC standards. With this function, the corrosion protection of a coating can be checked with the Thickness Gauge. The Group function stores the measured values directly on the Thickness Gauge. A memory of 50 groups with 50 measurements each is available on the Thickness Gauge. In each group, statistics are created for all measured values from the Thickness Gauge. All measurement data and statistics can be recalled after a measurement run on the Thickness Gauge. For further analysis of the measured values, the Thickness Gauge can be connected to a PC. The Thickness Gauge has a micro-USB interface for this purpose. The software can be used to transfer the measurement data from the Thickness Gauge to a PC. In addition, it is possible to carry out live measurements with the Thickness Gauge using the software. For further processing of the measured values from the Thickness Gauge, they can be exported in CSV and XLS format via the software. In addition to the coating thickness measurement, the Thickness Gauge can measure the temperature and humidity of the environment. Thus, the Thickness Gauge can be used to find out whether the climatic conditions are right to carry out further processing on the coating. With the V-groove, the coating thickness of, for example, pipes can also be determined with the Thickness Gauge.