Molex

<p>The Molex 172704-0068 is a 25-position D-Sub receptacle connector with IDC (Insulation Displacement Contact) termination. It belongs to the FCT DSUB series. The connector is designed for use in applications requiring a reliable, high-density interface. The IDC termination allows for quick and efficient cable assembly without the need for soldering. The connector is RoHS3 compliant, ensuring adherence to environmental standards.</p>

<p>The Molex 245136-1010 is a Mega-Fit-to-Mega-Fit Off-the-Shelf (OTS) overmolded cable assembly designed for power and wire-to-board applications. It features 10 circuits in a dual-row configuration with a 5.70mm pitch, and is terminated with female sockets on both ends. The cable is 1.0 meter long, uses 12 AWG UL 2464 wire, and has a black PBT insulation with a wire insulation diameter of 15.50mm.</p><p>&nbsp;</p><p>Electrical specifications include a maximum current rating of 18.4A per contact and a maximum voltage rating of 300V AC. Contacts are made of copper alloy with gold plating on the mating surface (minimum 0.381 µm) and matte tin plating on the termination surface (minimum 0.381 µm). The assembly is overmolded and includes a lock to mating part feature for secure connections.</p><p>&nbsp;</p><p>This assembly mates with Mega-Fit headers 172064 and 172065. It is packaged in a bag and has a net weight of 394.9 g. Compliance includes RoHS and REACH (not contained), with MSL 1 (unlimited) though not confirmed in the datasheet.</p>

<p>The Molex 5024391200 is a rectangular connector housing designed for free hanging (in-line) mounting. It features 12 positions in a single row with a 2.00mm pitch, making it suitable for compact wire-to-wire or wire-to-board connections. The housing uses a latch lock fastening mechanism for secure mating and accepts non-gendered crimp contacts. It is rated for an operating temperature range of -40°C to 105°C. The white housing is RoHS3 and REACH compliant. This connector housing is commonly used in automotive, consumer electronics, and industrial applications where reliable signal or power connections are required.</p>

<p>The Molex 0436500615 is a 6-position, single-row header designed for board-to-cable/wire connections. It features male pin contacts with a 3.00mm pitch, making it suitable for compact applications requiring reliable signal or power transmission. The header is through-hole mounted with kinked pin solder termination for secure attachment to the PCB.</p><p>&nbsp;</p><p>The contacts are made of brass with a tin finish of 100µin (2.54µm), providing good conductivity and corrosion resistance. The insulator is black liquid crystal polymer (LCP) glass-filled material, rated UL94 V-0 for flammability. The shrouded 4-wall design with a locking ramp ensures a secure mating connection and prevents accidental disconnection. A board guide feature aids in alignment during assembly.</p><p>&nbsp;</p><p>This component is RoHS3 compliant, REACH unaffected, and has a moisture sensitivity level of 1 (unlimited), indicating no special handling requirements for soldering. The header is suitable for a variety of industrial, automotive, and consumer electronics applications where a robust and reliable interconnect is needed.</p>

<p>The Molex 1451300803 is a Nano-Fit off-the-shelf (OTS) discrete wire cable assembly. It features a socket to socket connector configuration with 8 circuits arranged in a single row on a 2.50mm pitch. The cable has a length of 300.00mm (0.984') and is terminated using crimp contacts. The contacts are finished with 100.0µin (2.54µm) of tin.</p><p>&nbsp;</p><p>This unshielded cable assembly includes a latch lock and polarizing key for secure mating and proper alignment. The housing is black. The Nano-Fit series is designed for applications requiring a compact, high-density connection with a current rating up to 6.5A per circuit.</p><p>&nbsp;</p><p>The assembly uses individual wires and is suitable for prototyping and production applications. The crimp termination process allows for reliable wire-to-connector connections. Commonly used in power and signal applications within space-constrained environments.</p>

<p>The Molex 5013310607 is a 6-position, single-row, shrouded header designed for board-to-cable/wire applications. It features a 1.00mm pitch, surface mount termination, and a latch holder for secure mating. The contacts are made of phosphor bronze with a tin finish (40.0µin / 1.02µm) and have a square shape for reliable electrical contact.</p><p>&nbsp;</p><p>The header is fully shrouded on all four sides, providing protection and alignment for the mating connector. The insulation material is polyamide (PA46) / Nylon 4/6 in natural color, with a height of 5.40mm. It is rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>Designed for automated assembly, the part includes pick-and-place and solder retention features. The header is supplied in surface mount packaging, suitable for high-volume production. RoHS, REACH, and MSL Level 1 status are unverified but claimed.</p>

<p>The Molex 936012162 is a GWconnect STD single lever hood designed for heavy duty connector applications. It is part of the 93601 series and accommodates size 16A inserts. The hood is constructed from die-cast aluminum with a polyester powder coating in grey RAL 7037, providing robust mechanical protection.</p><p>&nbsp;</p><p>This hood features a top entry configuration with an M20 thread and includes two pegs for secure locking to the mating part. It is rated for a maximum voltage of 500V and a current of 16A, suitable for industrial power and signal connections. The enclosure meets IP66 and IP69 ingress protection ratings, making it resistant to dust and high-pressure water jets.</p><p>&nbsp;</p><p>The component complies with ANSI/UL 50, ANSI/UL 50 E, CSA C22.2 No.94-1-2, and EN 61984 standards. It is packaged in a bag and weighs 105 grams.</p>

<p>This is a Molex 5023860470 rectangular connector, a receptacle with 4 positions, 1 row, and 1.25mm pitch. It is designed for board-to-cable/wire applications. The connector has a surface mount, right angle mounting type with solder termination. It features a latch holder fastening type and solder retention. Electrical ratings: 1A current, 50V voltage. Operating temperature -40°C to 105°C. Insulation is natural color, height 5.45mm. Contact finish is tin with 39.4µin thickness. Material flammability rating UL94 V-0. The connector is RoHS3 compliant (unverified) and REACH unaffected (unverified). MSL level 1 (unverified). Note: compliance data is low confidence. The connector is suitable for compact wire-to-board connections in various electronic devices.</p>

<p>The Molex 39522-0003 is a 3-position, 5.00mm pitch shrouded header designed for use in Euro-style terminal blocks. It features male pins with a right angle orientation, allowing for space-efficient wire-to-board connections in compact enclosures. The header is rated for 300V and 15A, with an operating temperature range of -40°C to 105°C, suitable for industrial and commercial environments. Mounting is through hole with solder termination, and the contact mating finish is tin. The housing is black and the design includes a 2-side shroud for secure mating with compatible plugs. This part is RoHS3 compliant (unverified), MSL 1, and REACH unaffected. It is commonly used in power distribution, control systems, and automation equipment where reliable terminal block connections are required.</p>

<p>The Molex 0705430008 is a 9-position single row vertical header connector from the Molex header family. It features a shrouded 4-wall design with a latch holder fastening system for secure mating with cable/wire receptacles. The header uses 2.54mm pitch spacing and through hole solder termination, making it suitable for board-to-cable/wire applications.</p><p>&nbsp;</p><p>Electrical ratings include a 250V voltage rating. The contacts are made of phosphor bronze with a 0.38µm tin plating, providing good conductivity and corrosion resistance. The insulator is black polyester glass-filled material rated UL94 V-0 for flammability. Operating temperature range is -40°C to 105°C.</p><p>&nbsp;</p><p>The connector has a square pin contact shape with a 6.10mm contact length and 11.94mm overall contact length. Insulation height is 11.80mm. This connector is designed for reliable signal or power interconnections in various electronic equipment where a locking shrouded header is required.</p>

<p>The Molex 0532610471 is a 4-position, single-row header connector with a 1.25mm pitch, designed for board-to-cable/wire applications. It features a shrouded 4-wall housing with a detent lock fastening system for secure mating. Contacts are male blade type made of phosphor bronze with a tin finish (39.4µin thickness). The insulation is polyamide (PA46) in natural color, rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>Mounting is surface mount with right-angle orientation, using solder termination. The connector includes a solder retention feature to improve board-level reliability. Packaging is tape and reel. The part is listed as RoHS3 compliant (unverified) and has an MSL of 1 (unlimited).</p>

<p>The Molex 1200878463 is a 4-position circular cable assembly designed for industrial connectivity applications. It uses M12 circular connectors on both ends, with a female connector on one side and a male connector on the other. Both connectors have a straight orientation. The cable length is 2 meters and the jacket material is PVC. The assembly contains 4 wires corresponding to the 4 connector positions. Compliance status for RoHS, REACH, and Moisture Sensitivity Level is unverified and should be confirmed with the manufacturer.</p>

<p>The Molex 1054311102 is a 2-position, single-row header with a 2.50mm pitch, designed for board-to-cable/wire applications. It comes in a shrouded 4-wall configuration with a latch holder for secure mating. The housing is black Liquid Crystal Polymer (LCP) with a UL94 V-0 flammability rating, and the contacts are tin-plated brass (per database) or high-conductivity copper (per datasheet).</p><p>&nbsp;</p><p>According to the datasheet, this connector is part of the Nano-Fit power connector family, capable of carrying up to 8.0A per contact, while the product database lists a rating of 4A. The voltage rating is 250VAC. Operating temperature range is -40°C to 105°C. The connector features pick and place and solder retention for automated assembly.</p><p>&nbsp;</p><p>Electrical characteristics include contact resistance of 10mΩ, insulation resistance of 1000MΩ, and dielectric withstanding voltage of 1500V. Mechanical parameters specify mating force of 3N, unmating force of 3N, and a durability of 20 mating cycles for tin plating. The connector is also glow wire capable, with UL file number E29179 and CSA LR19980.</p>