Molex

<p>The Molex 68789-0041 is a USB 3.0 cable assembly featuring a USB 3.0 A connector on one end and a USB 3.0 Micro B connector on the other. The cable length is 1 meter.</p><p>&nbsp;</p><p>This assembly supports USB 3.0 data transfer rates and is intended for use in applications requiring a standard A to Micro B connection. The connectors are designed for repeated mating cycles.</p><p>&nbsp;</p><p>The cable is RoHS3 compliant and has a Moisture Sensitivity Level (MSL) of 1, indicating unlimited floor life. REACH status is unaffected.</p>

<p>The Molex 5031590400 is a 4-position, single-row receptacle connector designed for board-to-wire (cable) applications. It features a 1.50mm (0.059") pitch and utilizes through-hole mounting with kinked pin solder termination. The contacts are forked type with a tin finish, and the contact length is 3.40mm (0.134").</p><p>&nbsp;</p><p>The connector includes a latch holder for secure fastening and a board guide feature for alignment during assembly. The insulation is beige, with a height of 7.95mm (0.313"), and the housing material has a UL94 V-0 flammability rating. The operating temperature range is -40°C to 105°C.</p><p>&nbsp;</p><p>This receptacle is suitable for various wire-to-board interconnect applications where space is limited and a low-profile 1.50mm pitch is required. The through-hole mounting provides robust mechanical attachment to the PCB.</p>

<p>The Molex 1723161206 is a dual-row right-angle shrouded header from the Ultra-Fit family, designed for wire-to-board applications. It features 6 positions arranged in 2 rows with a 3.50mm pitch and through-hole, right-angle mounting. The header uses male square pins with a tin contact finish and is rated for 14.0A at 600VAC/DC.</p><p>&nbsp;</p><p>Key electrical characteristics include a contact resistance of 7 milliohms, insulation resistance of 1000 megohms, and a dielectric withstanding voltage of 1800 VAC. The header is constructed with a liquid crystal polymer (LCP) insulator rated UL94 V-0 for flammability, and operates over a temperature range of -40 to +105°C.</p><p>&nbsp;</p><p>Mechanical features include a full 4-wall shrouding for pin protection, a latch holder fastening system for secure mating, and a board guide for alignment. The contact mating force is rated at 4.5N maximum, and the connector is rated for 25 mating cycles. The contact length is 3.20mm.</p><p>&nbsp;</p><p>The header is halogen-free and glow wire capable. Packaging options include bag, tray, and reel. This connector mates with Molex series 172258, 172298, 172256, and 172286 receptacles.</p>

<p>The Molex 0874380643 is a 6-position single row header connector designed for board-to-cable/wire applications. It features male pin contacts with square contact shape, made of brass alloy with tin finish (2.54µm). The header is shrouded with 4 walls for robust mating and uses push-pull fastening.</p><p>&nbsp;</p><p>It has a pitch of 1.5mm, supports 6 positions all loaded, and is surface mounted with right angle orientation. The insulation is glass-filled polyamide (nylon) in beige color, with a flammability rating of UL94 V-0. Operating temperature range is -55°C to 105°C, and voltage rating is 250V.</p><p>&nbsp;</p><p>Termination is via solder. The contact length is 2.70mm and insulation height is 4.45mm. This connector is suitable for applications requiring compact, reliable connections in space-constrained environments.</p>

<p>The Molex 1731120047 is a coaxial female socket contact designed for D-Sub connector assemblies. It is compatible with RG-178 wire gauge and features a machined copper alloy contact form with gold plating on both inner and outer surfaces. The contact uses a crimp and solder termination style, ensuring a reliable connection.</p><p>&nbsp;</p><p>This contact is part of Molex's coaxial contact lineup, built for signal integrity in coaxial applications. The gold finish provides corrosion resistance and consistent electrical performance. Termination finish thickness is specified as 51.2µin (1.30µm) inner and 8.00µin (0.203µm) outer for the termination, and 51.2µin (1.30µm) inner and 31.5µin (0.80µm) outer for the contact finish.</p><p>&nbsp;</p><p>Designed for use with D-Sub connectors, this contact suits applications requiring coaxial signal paths. The machined construction ensures dimensional accuracy and repeatable mating cycles. No mounting type or standard package quantity is verified in the available data.</p>

<p>The Molex 1724470504 is a Mini-Fit Jr. series vertical header designed for board-to-cable/wire connections. It features 4 positions arranged in 2 rows with a 4.20mm pitch, providing a compact and reliable interconnect solution. The header is fully shrouded with a 4-wall design and includes a locking ramp for secure mating with compatible receptacles.</p><p>&nbsp;</p><p>This through-hole component has a green polyamide (PA66/Nylon 6/6) insulator with a UL94 V-0 flammability rating, suitable for applications requiring flame resistance. The contacts are made of brass with a tin finish (100µin thickness) and have a square shape with a contact length of 3.56mm. The header also includes board lock features for secure attachment to the PCB and is glow wire compliant.</p><p>&nbsp;</p><p>Electrical ratings include a voltage rating of 600VAC/DC, while current rating varies by wire gauge. The operating temperature range is -40°C to 105°C. The component is RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified.</p><p>&nbsp;</p><p>The header is intended for use in power and signal applications where a reliable, locking connection is required. Its compact 4-position design makes it suitable for space-constrained designs in industrial, automotive, and consumer electronics.</p>

<p>The Molex 172201-0002 is a Powerplane bus bar receptacle assembly designed for power distribution in backplane systems. It features a single-row receptacle configuration with through hole, right angle mounting and solder termination for secure attachment to printed circuit boards.</p><p>&nbsp;</p><p>The connector has a black housing and silver contact finish, providing reliable electrical performance. As a specialized backplane connector, it is intended for power bus applications where a robust, low-resistance connection is required.</p>

<p>The Molex 1054291208 is a rectangular header connector designed for board-to-cable/wire applications. It provides 8 positions in a 2-row configuration with a 2.50mm pitch and row spacing, making it suitable for compact wiring solutions. The connector features a shrouded 4-wall housing with a latch holder fastening mechanism for secure mating.</p><p>&nbsp;</p><p>Constructed with a black liquid crystal polymer (LCP) insulator, the header offers a UL94 V-0 flammability rating for reliable performance in demanding environments. The contacts are made of brass with a tin plating finish of 15.0µin (0.38µm), ensuring good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>Electrical ratings include a current rating of 4A and a voltage rating of 250VAC, with an operating temperature range of -40°C to 115°C. The header is surface mount (SMT) with solder termination and includes pick-and-place and solder retention features for automated assembly.</p><p>&nbsp;</p><p>Ideal for use in consumer electronics, industrial controls, and other compact systems, this connector provides a reliable interconnection between a PCB and cables.</p>

<p>The Molex 1053071208 is an 8-position single-row receptacle housing from the Nano-Fit power connector series. It features a 2.50mm pitch and uses a latch lock fastening mechanism for secure mating. The housing is designed for free-hanging (in-line) mounting and accepts non-gendered crimp terminals (sold separately).</p><p>&nbsp;</p><p>Electrical ratings include a maximum current of 8.0A and maximum voltage of 250V. Contact resistance is 10 milliohms, insulation resistance is 1000 Megohms, and dielectric withstanding voltage is 1500V. The housing is made of Nylon UL 94V-0 material, providing flammability protection. Mechanical characteristics include a mating and unmating force of 3N and a contact retention force of 27N.</p><p>&nbsp;</p><p>The connector is RoHS3 compliant, REACH unaffected, MSL level 1, halogen-free, and glow wire capable. It is suitable for power and signal interconnection in a variety of applications including consumer appliances, telecom/networking equipment, automotive interior lighting, lighting fixtures, and industrial equipment.</p>

<p>The Molex 1200908029 is an M12 receptacle connector designed for circular cable assemblies. It features a 4-pole 3-wire configuration with male pins, an M20 thread for secure mounting, and a Delrin thermoplastic housing. This part belongs to the KK-H series.</p><p>&nbsp;</p><p>The connector is rated RoHS3 compliant, REACH unaffected, and has an MSL of 1 (Unlimited). These environmental compliance status are provided from distributor data but are not independently verified.</p><p>&nbsp;</p><p>The M20 thread and Delrin housing make it suitable for industrial applications requiring robust connections. The male design allows mating with female cable connectors in automation and sensor systems.</p>