Molex

<p>The Molex 39533-3506 is a Euro style terminal block plug designed for reliable wire-to-board connections in industrial and commercial applications. It features 6 positions on a 5.08mm pitch, providing a compact yet robust interface for power and signal distribution.</p><p>&nbsp;</p><p>The plug is configured for free hanging (vertical) mounting, making it suitable for applications where the connector is not board-mounted. The black housing offers durability and clear visual identification, while the gold plated contacts ensure low resistance and corrosion resistance over repeated mating cycles.</p><p>&nbsp;</p><p>This component is part of the Molex Eurostyle terminal block family, known for its screw clamp termination and compatibility with standard header pin strips. It is commonly used in control systems, power supplies, and instrumentation where secure and maintainable connections are required.</p>

<p>The Molex 87705-1021 is an inline module socket designed for DDR2 memory modules. It features 240 positions arranged at a 1 mm pitch, making it suitable for high-density memory applications.</p><p>&nbsp;</p><p>This socket is classified under Memory Connectors and is intended for use in applications requiring reliable connection of DDR2 memory modules. The part is RoHS3 compliant and REACH unaffected, meeting current environmental standards.</p><p>&nbsp;</p><p>As an inline module socket, it is designed for through-hole or surface mount installation on a printed circuit board, providing a secure interface between the memory module and the board.</p>

<p>The Molex 73927-0020 is an SFP (Small Form-factor Pluggable) Cage Top connector designed for use in pluggable connector assemblies. This component is a mechanical cage that houses an SFP module, providing the interface for high-speed data transmission in networking and telecommunications equipment.</p><p>&nbsp;</p><p>Key specifications include an SFP connector standard and a cage-style connector form factor. The part is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited). It is categorized under pluggable connector assemblies within the connectors and interconnects product family.</p><p>&nbsp;</p><p>This connector is suitable for applications requiring reliable, hot-pluggable connections in data communication systems. Its cage design ensures proper alignment and shielding for the SFP module.</p>

<p>The Molex 1731140247 is a D-Sub connector assembly featuring two 37-position receptacles in a single housing. This dual receptacle configuration allows for efficient space utilization in applications requiring multiple D-Sub connections. The connector is RoHS3 compliant and has a moisture sensitivity level of 1 (unlimited), ensuring robust handling during assembly. It is part of the FCT DPORT series from Molex, designed for reliable signal transmission in industrial control, data communication, and rack-mount systems.</p>

<p>The Molex 73644-1016 is an HDM Backplane Connector System header designed for high-density board-to-board backplane applications. It offers 144 circuits in a 6-row by 24-column configuration with a 2.00mm pitch, enabling compact and reliable interconnections. The header uses a vertical orientation and press-fit termination for secure through-hole mounting, with a recommended PCB thickness of 2.50mm and a PC tail length of 3.50mm.</p><p>&nbsp;</p><p>Electrically, each contact supports a maximum current of 1.0A and a voltage rating of 250V AC, with a data rate of 1 Gbps. The contacts are gold-plated (30µin minimum on mating, 2µin on termination) for reliable signal integrity. The housing is made of high-temperature thermoplastic with a flammability rating of 94V-0, and the metal contacts are phosphor bronze and stainless steel.</p><p>&nbsp;</p><p>Designed for durability, the connector withstands up to 250 mating cycles and operates over a temperature range of -55°C to +105°C. It is stackable and surface mount compatible (SMC), with a guide post location B for alignment. The part is packaged in tubes and is RoHS3 compliant with low-halogen status.</p>

<p>The Molex 0675031020 is a USB 2.0 Mini B receptacle connector designed for surface mount, right angle mounting. It features 5 contacts and a single port, with a horizontal mounting orientation. The connector is shielded for EMI protection and includes a board guide for reliable alignment during assembly.</p><p>&nbsp;</p><p>Rated for 1A current and 30VAC/DC, this connector supports USB 2.0 OTG specifications. It operates within a temperature range of 0°C to 50°C, making it suitable for standard consumer and industrial environments. Termination is via solder, ensuring a robust connection to the PCB.</p><p>&nbsp;</p><p>This component is commonly used in portable devices, data transfer interfaces, and embedded systems requiring a compact USB Mini B connection. The right-angle design helps save board space in space-constrained applications.</p>

<p>The Molex 1053131204 is a 4-position header from the Nano-Fit power connector series. It features a 2.50mm pitch and a through hole right angle mounting style with solder termination. The header is fully shrouded with a 4-wall design, providing terminal protection and alignment. Contacts are made of high-conductivity copper with a tin plating of 15.0µin (0.38µm). The insulation is black liquid crystal polymer (LCP) with a height of 3.78mm. Electrical ratings include 8.0A current, 250V voltage, contact resistance of 10 milliohms, dielectric withstanding voltage of 1500V, and insulation resistance of 1000 megohms. Mechanical features include a latch holder for secure mating, a board guide for alignment, and specified insertion and mating forces. The operating temperature range is -40°C to 105°C. This connector is designed for board-to-cable/wire applications and is RoHS3 compliant, halogen free, and glow wire capable.</p>

<p>The Molex 5025841070 is a 10 position, single row, 1.50mm pitch rectangular connector receptacle designed for board to cable/wire applications. It features a surface mount termination with solder retention and is compatible with pick and place assembly processes. The connector uses forked tin contacts with a contact finish thickness of 1.00µm and is housed in a beige insulator with a 7.25mm insulation height. The fastening type is a latch holder for secure mating. The operating temperature range is -40°C to 105°C. The insulator material has a UL94 V-0 flammability rating. This connector is suitable for automated assembly and provides reliable solder retention for robust board-level connections.</p>

<p>The Molex 0026602100 is a 10-position, single-row unshrouded header designed for board-to-board or cable applications. It features a 3.96mm (0.156") pitch and uses through-hole solder termination for secure mounting on PCBs. The square male pins are made of tin with a finish thickness of 60.0µin (1.52µm), ensuring reliable conductivity and corrosion resistance. The header has a contact length of 11.43mm (0.450") and an overall contact length of 18.29mm (0.720"), suitable for mating with standard connectors.</p><p>&nbsp;</p><p>The insulation material is glass-filled polyester, colored natural, with a UL94 V-0 flammability rating for improved safety. The insulation height is 3.30mm (0.130"). The push-pull fastening type allows easy mating and unmating. This unshrouded design provides mechanical and electrical connection for power and signal lines. The square contact shape ensures good retention and multiple mating cycles.</p><p>&nbsp;</p><p>With its compact single-row layout and 3.96mm pitch, the 0026602100 is ideal for applications requiring space-saving yet robust interconnections. The through-hole mounting provides strong mechanical attachment compared to surface-mount alternatives. It can be used in industrial controls, consumer electronics, and other applications requiring reliable connector interfaces.</p>

<p>The Molex 89400-0320 is a 2.00mm pitch wire-to-board header designed for signal and power applications. It has 3 circuits arranged in a single row, with a vertical through-hole termination style. The header is partially shrouded and includes a lock to mating part for secure connections.</p><p>&nbsp;</p><p>Key electrical specifications include a maximum current rating of 4A per contact and a voltage rating of 250V. The operating temperature range is -25°C to +85°C, making it suitable for a wide range of environments. The header is rated for 30 mating cycles and has a mated height of 7.30mm.</p><p>&nbsp;</p><p>The housing is made of nylon with a 94V-0 flammability rating, and the contacts are tin-plated on both mating and termination ends. The PCB retention feature ensures reliable soldering, with a recommended PCB thickness of 1.20mm. The component is packaged in a bag and is RoHS compliant, REACH unaffected, and low-halogen.</p>