Molex

<p>The Molex 502078-3910 is an FPC (Flexible Printed Circuit) connector with 39 positions and a 0.25 mm pitch. This connector is designed for high-density interconnections in compact electronic devices. The 0.25 mm pitch allows for space-saving board layouts, while the 39 positions provide ample I/O for various signal and power lines. Typical applications include mobile devices, cameras, and other portable electronics where flexible circuit connections are required. The connector is part of Molex's FPC connector family, offering reliability and ease of assembly.</p>

<p>The Molex 0532611071 is a 10-position, single-row, shrouded header (4-wall) with a 1.25mm pitch, designed for board-to-cable/wire connections. The connector uses male blade contacts made of phosphor bronze with a tin finish (39.4µin thickness) and a rectangular contact shape. It is a surface mount, right-angle component with solder termination and includes a solder retention feature to secure the connector during reflow.</p><p>&nbsp;</p><p>The housing is molded from polyamide (PA46) / Nylon 4/6 in a natural color with an insulation height of 3.40mm. The fastening type is a detent lock for secure mating. The material flammability rating is UL94 V-0. The connector is intended for applications requiring a compact, low-profile, shrouded header with reliable retention and RoHS3 compliance (unverified).</p>

<p>The Molex 0782131044 is a power header connector designed for board edge mounting. It features a 4-position, 2-row configuration with all positions loaded, providing a 4 power contact layout. The connector uses press-fit termination for reliable connections and has gold contact finish with 30µin thickness for enhanced conductivity and corrosion resistance. The housing is black. This connector is suitable for power applications in backplane systems.</p>

<p>The Molex 43202-6101 is a right-angle (side entry) modular jack from the 43202 series, designed for PCB mounting with through hole termination. It has a 6/6 position configuration (6 positions, 6 loaded contacts) and a 1x1 port configuration. The jack height is 11.58 mm, and the mating interface pitch is 1.02 mm with a termination pitch of 1.27 mm.</p><p>&nbsp;</p><p>Electrical ratings include a maximum current of 1.5 A per contact and a maximum voltage of 150 V AC (RMS). The contacts are made of phosphor bronze with gold plating on the mating surface (minimum 1.27 µm) and tin plating on the termination area (minimum 2.54 µm). The housing is black high-temperature thermoplastic with a flammability rating of 94V-0.</p><p>&nbsp;</p><p>The operating temperature range is -40 to +85 °C. The jack is rated for 500 mating cycles and includes PCB retention features. It is compatible with wave soldering processes up to 260 °C for a maximum of 5 seconds. The component is RoHS compliant and REACH SVHC not contained, but is not low-halogen.</p>

<p>The Molex 0039281023 is a 2-position header connector designed for board-to-cable/wire applications. It features male pin contacts with a square shape, made of brass with a tin finish of 35.4µin (0.90µm). The connector is shrouded with a 4-wall design and includes a locking ramp for secure mating. The insulation is made of polyamide (PA66/Nylon 6/6) in natural color, with a flammability rating of UL94 V-2. The mounting type is through hole with solder termination. The row spacing is 0.165" (4.20mm) and the insulation height is 12.80mm. The contact length is 3.50mm. This connector is suitable for applications requiring a reliable and secure connection in a compact 2-position form factor.</p>

<p>This Molex 5015714007 is a 40-position, 2-row shrouded header with a 1.00mm pitch and 2.66mm row spacing. It features surface mount, right angle termination with solder retention. The contacts are male pins made of phosphor bronze with a 1.00µm gold finish. The insulation is natural polyamide (nylon) with an 8.25mm height and UL94 V-0 flammability rating. The connector is shrouded with 4 walls and includes a latch holder for secure mating. Designed for board-to-cable/wire interconnects, it is suitable for high-density applications requiring reliable connections.</p><p>&nbsp;</p><p>The header is terminated via solder and is RoHS3 compliant (unverified). Moisture sensitivity level is 1 (unlimited). REACH unaffected status is also unverified. The part is available in tape and reel packaging from distributors.</p><p>&nbsp;</p><p>Given its compact pitch and right-angle mounting, this connector is ideal for space-constrained designs in consumer electronics, industrial controls, and other applications where a robust cable-to-board interface is required. The gold plating ensures good corrosion resistance and reliable signal integrity.</p>

<p>This Molex Nano-Fit power connector header features 3 positions in a single row with a 2.5mm pitch. It uses through hole termination with kinked pins for secure soldering. The shrouded 4-wall housing with latch holder provides reliable mating and protection. The insulator is made of liquid crystal polymer (LCP), black in color, with an operating temperature range of -40°C to 105°C. Electrical specifications include a current rating of 8A, voltage rating of 250V, contact resistance of 10 mΩ, dielectric withstanding voltage of 1500V, and insulation resistance of 1000 MΩ. The contact material is brass with tin plating (1.5µm thick), supporting up to 20 mating cycles. Mechanical forces include mating force of 3N, unmating force 3N, and contact retention to housing of 27N. Additional features include a board guide. The header is RoHS, halogen free, and glow wire compliant, with UL and CSA certifications.</p>

<p>The Molex 03-06-1361 is a rectangular connector housing designed for power applications. It accommodates 36 circuits in a 2-row configuration with a pitch of 0.165 inches (4.19 mm). The housing is made of nylon and features panel mount with mounting ears for secure installation. It is rated UL94 V-2 for flammability and operates over a temperature range of -40°C to 105°C. This housing accepts female socket contacts (sold separately) and is suitable for use with Molex 0.062" pin diameter terminals. The part is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). It is commonly used in power distribution, automotive, and industrial applications where reliable connections are required.</p>

<p>The Molex 0436500209 is a 2-position, single-row, male pin header designed for surface-mount right-angle assembly. It features a fully shrouded 4-wall design with a locking ramp fastening system for secure mating with cable housings. The insulator is molded from black, glass-filled Liquid Crystal Polymer (LCP) rated UL94 V-0 for flammability resistance. Contacts are square-shaped brass with a full tin plating of 60.0µin (1.52µm) for reliable soldering and corrosion protection.</p><p>&nbsp;</p><p>With a 3.00mm pitch and board lock feature, this connector is suited for board-to-cable/wire applications requiring a compact, secure interface. The 1-row, 2-position layout supports space-constrained designs. All positions are loaded.</p><p>&nbsp;</p><p>The connector is offered in multiple packaging options including Tape &amp; Reel, Cut Tape, and Digi-Reel, accommodating different production volumes. The RoHS and REACH compliance have low confidence and should be verified from official manufacturer documentation. No electrical ratings (current, voltage) or operating temperature range are provided in the available data.</p>

<p>The Molex 0436500409 is a 4-position, single-row, 3.00mm pitch header designed for board-to-cable/wire applications. It features a surface mount, right angle mounting style with solder termination. The connector is shrouded with a 4-wall design to protect the male pin contacts and includes a locking ramp for secure mating with corresponding receptacles. A board lock feature ensures reliable retention during soldering and use.</p><p>&nbsp;</p><p>The male pin contacts are made of brass with a tin finish (1.52µm thickness) for good conductivity and corrosion resistance. The housing is molded from black, glass-filled Liquid Crystal Polymer (LCP) with a UL94 V-0 flammability rating, making it suitable for environments requiring flame retardancy. The insulation height is 4.37mm, and the contact shape is square.</p><p>&nbsp;</p><p>This header is part of Molex's connector portfolio and is commonly used in applications where a reliable, space-saving wire-to-board connection is needed. The 3.00mm pitch provides a balance between density and ease of handling. The part is RoHS3 compliant and REACH unaffected, though these statuses are unverified.</p>

<p>The Molex 5046185012 is a 50-position receptacle connector featuring center strip contacts designed for board-to-board mezzanine applications. It has a 0.35mm pitch and a mated stacking height of 0.6mm, making it suitable for low-profile interconnections. The connector is surface mount and includes features such as pick and place and solder retention for automated assembly. The contact finish is gold, ensuring reliable electrical performance. The height above board is 0.61mm. This connector is RoHS3 compliant and has an MSL of 1 Unlimited.</p>

<p>The Molex 5023510300 is a 3 position receptacle housing from the DuraClik 2.00mm wire-to-board connector system. It features a single row of female socket contacts with a 2.00mm pitch, latch holder fastening for secure mating, and a free hanging (in-line) mounting style. The housing is natural in color and designed for crimp termination.</p><p>&nbsp;</p><p>This housing is rated for an operating temperature range of -40°C to 105°C, making it suitable for passenger compartment automotive applications. The DuraClik family offers design flexibility with various circuit options and provides an audible click on mating for confirmation.</p><p>&nbsp;</p><p>The enclosed contact design protects against dust and debris and prevents tangling during harness assembly. The latch holder fastening type ensures reliable retention in high-vibration environments.</p>