Molex

<p>The Molex 51004-0900 is a rectangular connector housing designed for low profile applications. It features a 2.0mm pitch and is part of the 51004 series. The housing is suitable for use in various electronic interconnect systems where space is constrained.</p><p>&nbsp;</p><p>This component is compliant with RoHS3 and REACH regulations, and has a Moisture Sensitivity Level (MSL) of 1 (unlimited). These compliance attributes make it suitable for use in environmentally sensitive applications.</p><p>&nbsp;</p><p>The housing is designed for use with crimp terminals (not included) and is typically used in wire-to-board or wire-to-wire configurations. Its low profile design helps save space on PCBs and in enclosures.</p>

<p>The Molex 52746-0470 is a 4-position FPC (Flexible Printed Circuit) connector featuring a 0.5mm pitch and a right-angle surface mount design. This ZIF (Zero Insertion Force) connector assembly is intended for reliable connections in compact electronic assemblies.</p><p>&nbsp;</p><p>The connector is rated for a maximum current of 0.5A and a maximum voltage of 50V, making it suitable for low-power signal and power applications. It is constructed with a Liquid Crystal Polymer (LCP) housing and phosphor bronze contacts, with solder termination for secure attachment to the PCB.</p><p>&nbsp;</p><p>The component is packaged in Tape &amp; Reel (TR) for automated assembly, with a standard package quantity of 1000 pieces. It is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited).</p>

<p>The Molex 5016451420 is a 14-circuit, dual-row, vertical through hole header from the iGrid wire-to-board system. It uses a 2.00mm pitch and features a shrouded 4-wall design with latch holder fastening for secure mating. The header is polarized to both the mating part and the PCB and includes a board guide for alignment.</p><p>&nbsp;</p><p>Electrical ratings include a maximum current of 2.0A per contact and a maximum voltage of 250V AC (RMS)/DC. The operating temperature range is -40°C to +105°C. The contacts are made of brass with a tin plating on both the mating and termination areas, while the natural-colored insulator is glass-filled Nylon 6/6 with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>This header is supplied in tray packaging and has a net weight of 923.6 mg. It is RoHS and REACH compliant, and is not low-halogen. The 3.20mm PC tail length is suitable for standard through-hole soldering.</p>

<p>The Molex 10-89-1201 is a 20-position unshrouded header connector designed for board-to-board and cable applications. It features a 2.54mm pitch with two rows of square pins, providing reliable connections in a compact form factor. The header is through hole mounted with solder termination, suitable for wave soldering processes.</p><p>&nbsp;</p><p>The contacts are made of phosphor bronze with a tin finish, offering good conductivity and corrosion resistance. The insulation is black polyester, glass filled, with a UL94 V-0 flammability rating, ensuring safety in various environments. The overall contact length is 11.10mm, with a mating pin length of 2.71mm.</p><p>&nbsp;</p><p>This connector is ideal for general purpose prototyping, industrial equipment, and consumer electronics where a low-profile, unshrouded header is needed. Its push-pull fastening allows easy mating and unmating. The part is also available from distributors like Digi-Key under part number WM6820-ND.</p>

<p>The Molex 1001138220 is a zSFP+ cage assembly designed for high-speed pluggable connector applications. It is configured as a ganged 1x2 cage, allowing two zSFP+ modules to be inserted side by side.</p><p>&nbsp;</p><p>The cage features integrated EMI spring fingers for electromagnetic interference shielding, helping to maintain signal integrity in dense I/O environments. It mounts via through hole right angle orientation and uses press-fit termination for a solderless connection to the PCB.</p><p>&nbsp;</p><p>This component is suitable for use in networking, telecommunications, and data communications equipment where zSFP+ form factor modules are employed.</p>

<p>The Molex 90170-0010 is a strain relief accessory designed for use with QF-50 series connectors, following the DIN 41651 standard. It accommodates up to 10 circuits in a dual row configuration with a 1.27mm pitch, suitable for ribbon cable applications.</p><p>&nbsp;</p><p>This component is rated for 1A maximum current per contact and 250V AC/DC maximum voltage. The housing is molded in black polyester and includes a locking mechanism to the mating part for secure retention. The operating temperature range spans from -25°C to +85°C.</p><p>&nbsp;</p><p>Packaged in a bag, this strain relief is part of the Molex 90170 series and is used with compatible QF-50 connectors. It is RoHS and REACH compliant, with SVHC not contained. For detailed mechanical drawings and product specifications, refer to the product specification PS-99020-0015 and sales drawing SD-90170.</p>

<p>The Molex 0781710004 is a 4-position, single-row shrouded male pin header (plug) with a 1.20mm pitch. It is designed for board-to-cable/wire connections and features a 3-wall shrouded design for protection and alignment. The connector uses a friction lock fastening type to ensure secure mating.</p><p>&nbsp;</p><p>The connector is rated for 50V DC operation and has an operating temperature range of -25°C to 85°C. The insulation material is Liquid Crystal Polymer (LCP) with a UL94 V-0 flammability rating, providing reliable performance in demanding environments.</p><p>&nbsp;</p><p>The header is surface mount (SMD) with solder termination and includes solder retention features for improved board-level reliability. The contacts are made of copper alloy with a gold finish, ensuring low contact resistance and corrosion resistance. The insulation height is 1.40mm, and the connector is fully loaded with 4 positions.</p><p>&nbsp;</p><p>This connector is suitable for compact electronic devices where space is limited, such as portable electronics, consumer devices, and industrial control systems. Its 1.20mm pitch allows for high-density interconnections.</p>

<p>The Molex 51004-0800 is a rectangular connector housing designed for 2.0mm pitch applications. It features a low profile design suitable for space-constrained environments. This housing is compliant with RoHS3 and REACH standards and has a moisture sensitivity level of 1 (unlimited). The housing is unpopulated and requires separate crimp terminals for wire termination. It is intended for use in wire-to-board or board-to-board connections where a compact housing is required.</p>