TE Connectivity

<p>The 5414974-1 is a BNC jack connector from TE Connectivity, featuring a female socket contact. It is designed for 50 Ohm impedance and supports frequencies up to 4 GHz, making it suitable for RF signal transmission applications.</p><p>&nbsp;</p><p>The connector uses a bayonet lock fastening type for secure mating and includes a board lock feature for enhanced mechanical retention on the PCB. The center contact is made of beryllium copper, and the housing is silver in color.</p><p>&nbsp;</p><p>Mounting is through hole with a right angle orientation, and both contact and shield terminations are solder type. This connector is a single-port, right-angle design ideal for space-constrained PCB layouts in communication and test equipment.</p>

<p>The TE Connectivity D-602-0126 is a coaxial socket center contact designed for use in multi-purpose connector applications. It accommodates 22-26 AWG wire and terminates via solder, ensuring reliable electrical connections. The contact is constructed from copper alloy with a gold finish, providing good conductivity and corrosion resistance.</p><p>&nbsp;</p><p>This contact is part of TE Connectivity's broad portfolio of interconnect solutions. Its coaxial design makes it suitable for RF and signal transmission applications where controlled impedance is required. The socket center configuration allows it to mate with corresponding pin contacts.</p><p>&nbsp;</p><p>As a solder-type contact, it is intended for permanent installation where mechanical stability and low resistance are priorities. The gold plating on the contact surface enhances durability and maintains signal integrity over repeated mating cycles.</p>

<p>This TE Connectivity heat shrink boot is a transition-breakout type with a 3:1 ratio, designed for shell size 34. The boot is made from semi-flexible, halogen-free polyolefin material, colored black.</p><p>&nbsp;</p><p>Key supplied dimensions: large diameter 38.61 mm and small diameter 19.3 mm. After recovery, the large diameter reduces to 18.8 mm and the small to 9.65 mm. The recovered lengths are 61.47 mm (large) and 73.66 mm (small), with a total recovered length of 135.13 mm.</p><p>&nbsp;</p><p>This molded part is qualified under the VG 95343 Qualified Products List (QPL) and is RoHS3 compliant and REACH unaffected. Moisture sensitivity level is MSL 1 (unlimited). Suitable for cable and wire management in demanding environments.</p>

<p>The 643408-1 is a 6-position, single-row header connector from TE Connectivity's Universal MATE-N-LOK series. It features a 6.35mm pitch and a shrouded 4-wall design for secure mating. The connector is through-hole mounted with solder termination and uses phosphor bronze contacts with tin plating on both the mating and post surfaces.</p><p>&nbsp;</p><p>Rated for 12A current and 600VAC, this header operates over a temperature range of -40°C to 105°C. The insulation is white polyamide (nylon) with a UL94 V-0 flammability rating. A locking ramp fastening type and board guide feature ensure reliable board-to-cable/wire connections.</p><p>&nbsp;</p><p>This component is suitable for general purpose applications requiring a robust, polarized connector system. The contact length post is 3.94mm and the insulation height is 13.97mm.</p>

<p>The TE Connectivity 174952-1 is a rectangular connector housing designed for use in wire-to-wire or wire-to-board applications. It features a plug configuration with 20 positions arranged in 2 rows, with a row spacing of 5.90mm (0.232 inches). The housing is white and uses a latch holder fastening type for secure mating. Contacts are female socket type and are terminated via crimp, allowing for reliable connections. The housing is free hanging (in-line) and suitable for a wide operating temperature range of -30°C to 105°C. This connector housing is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). It is commonly used in automotive, industrial, and consumer electronics applications where a compact and robust interconnect solution is required.</p>

<p>The TE Connectivity 130130 is a non-insulated circular ring terminal designed for reliable wire termination in electrical and electronic applications. It accommodates wire gauges from 13.5 to 17 AWG and fits a #1/4 stud size, making it suitable for a variety of power and signal connections.</p><p>&nbsp;</p><p>The terminal features a crimp termination style for secure and consistent connections. The contact is made of copper with a tin finish, providing good conductivity and corrosion resistance. The terminal has a thickness of 0.81mm (0.032"), a width of 11.91mm (0.469"), and a length of 21.70mm (0.854").</p><p>&nbsp;</p><p>This ring terminal is designed for free hanging (in-line) mounting, offering flexibility in wiring harness assembly and field installations. Its non-insulated construction is ideal for applications where insulation is not required or where additional heat shrink tubing is used.</p>

<p>The TE Connectivity 201571-2 is a metal shield designed for use with M Series backplane connectors. It provides electromagnetic shielding and mechanical protection for the connector assembly. The shield accommodates 34 positions and is constructed as a two-piece long design for ease of installation. It is a passive component that does not require soldering or specific mounting hardware. This accessory is suitable for backplane systems in telecommunications, data processing, and industrial equipment where connector shielding is required.</p>

<p>The TE Connectivity 206043-3 is a circular connector receptacle housing with 14 positions arranged in shell size 17-14 with contact size 16. This housing is designed for use with female socket contacts and accepts crimp contacts.</p><p>&nbsp;</p><p>This housing features a threaded fastening mechanism for secure mating and a free hanging (in-line) mounting style, making it suitable for cable-to-cable or cable-to-panel applications where panel cutout is not available. It is constructed from polyamide (PA) nylon with a black color and is rated UL94 V-0 for flammability.</p><p>&nbsp;</p><p>The connector housing is unshielded and intended for power circuit applications, as inferred from its shell and contact sizes. It has a keyed orientation of A to prevent mismating.</p>

<p>The TE Connectivity 5747150-8 is a 9-position D-Sub receptacle connector designed for reliable signal interconnects. It features female socket contacts arranged in 2 rows within a shell size 1 (DE, E) housing. The connector has a steel shell with a tin plating and includes a housing/shell flange feature with 4-40 threaded inserts for secure mating. The contacts are signal type and are terminated via through hole solder connections, making it suitable for vertical mounting on a printed circuit board.</p><p>&nbsp;</p><p>This connector is rated for 6A per contact and utilizes gold contact plating with a thickness of 30.0 µin (0.76 µm) to ensure low contact resistance and high durability over repeated mating cycles. The insulator material has a UL94 V-0 flammability rating for safety. The part is wave solder capable up to 265°C, compatible with standard soldering processes.</p><p>&nbsp;</p><p>The 5747150-8 is RoHS compliant with exemption 6(c) for lead in copper alloy, ELV compliant with exemption 3, and China RoHS 2 restricted materials above threshold. It contains halogen above low-halogen thresholds (Br or Cl &gt; 900 ppm). REACH compliance indicates SVHC lead content at 3.7% in the component part.</p>

<p>The TE Connectivity 745919-3 is a two-piece D-Sub backshell designed for use with 15-position D-Sub connectors. This shielded backshell provides a 180° cable exit angle, suitable for routing cables inline with the connector. It is constructed from a zinc alloy metal with a nickel over copper plating, offering durability and EMI protection.</p><p>&nbsp;</p><p>The backshell includes assembly hardware and a strain relief mechanism to secure the cable and protect the connection from mechanical stress. Color is silver, and it is designed for use with round cables. This accessory is a common component in applications requiring reliable cable management and shielding for D-Sub interfaces.</p>