DC DC Converters

<p>The DH06S1215A is an isolated DC-DC converter module from Delta Electronics, delivering up to 6W of output power with a single 15V output. The module operates from a 9V input and provides a maximum output current of 400mA. It features 82% efficiency and includes protection functions: overcurrent protection (OCP), short circuit protection (SCP), and undervoltage lockout (UVLO). Designed for medical applications, this converter offers reliable isolation. The module is packaged in a 24-DIP through-hole form factor with 8 leads, measuring 31.8mm x 20.3mm x 10.2mm. Its operating temperature range spans -40°C to 85°C, and it is RoHS3 compliant with an MSL rating of 1 (unlimited floor life).</p>

<p>The Wurth Elektronik 171031801 is a fully integrated non-isolated Point-of-Load (PoL) DC-DC converter module belonging to the MagI3C Power Module WPME-VDLM series. It integrates the switching regulator, inductor, input and output capacitors in a single LGA-16EP package measuring 9.0mm x 9.0mm x 3.0mm.</p><p>&nbsp;</p><p>The module operates from a 4V to 18V input voltage range and provides an adjustable output from 0.8V to 17V with a maximum output current of 3A. Peak efficiency reaches up to 95% with a fixed switching frequency of 850kHz. The device uses peak current mode control and includes protection features such as overcurrent (OCP), overtemperature (OTP), short circuit (SCP), and undervoltage lockout (UVLO).</p><p>&nbsp;</p><p>Designed for industrial, medical, and test &amp; measurement applications, the module requires no minimum load and supports automatic power saving at light loads. The package features exposed pads for enhanced thermal performance and operates over an ambient temperature range of -40°C to 85°C with a junction temperature range of -40°C to 125°C.</p>

<p>The AXA02B36-L from Artesyn Embedded Power is an isolated DC/DC converter module designed for commercial ITE applications. It delivers a regulated 12V output at up to 2.09A from an 18V nominal input, providing 25W of output power. The module achieves up to 90% efficiency, minimizing power loss and heat generation.</p><p>&nbsp;</p><p>Key features include remote on/off control and short-circuit protection (SCP), enhancing system reliability. The converter operates over a wide temperature range of -40°C to 85°C, making it suitable for demanding environments. The 6-DIP package with through-hole mounting ensures robust mechanical connection and easy integration into PCBs.</p><p>&nbsp;</p><p>With its compact dimensions of 25.4mm x 25.4mm x 10.2mm (1.00" x 1.00" x 0.40"), this module is ideal for space-constrained applications. The single-output design simplifies power distribution in industrial and telecommunications systems.</p>

<p>The Vicor B048F240T30 is a high-efficiency bus converter module from the VI Chip BCM family. It operates from a 38 to 53 Vdc primary bus and delivers an isolated 19.0 to 26.5 Vdc output (nominal 24 Vdc) at up to 12.5 A continuous (18.8 A peak for 1 ms). Continuous output power is 300 W, with a peak capability of 450 W for 1 ms.</p><p>&nbsp;</p><p>This module achieves typical efficiency of 96% (95.8% specified) and provides 2250 Vdc input-to-output isolation. It features remote on/off control and undervoltage lockout (UVLO). The operating junction temperature range is -40°C to 125°C (T-Grade).</p><p>&nbsp;</p><p>The B048F240T30 uses through-hole termination and is housed in a compact module package measuring 32.5 mm x 22.0 mm x 6.7 mm, weighing 15 g. It is designed for commercial ITE applications and can power non-isolated point-of-load converters or serve as an independent 19.0-26.5 V source.</p>

<p>The TDK-Lambda CC1R5-1205SF-E is an isolated DC-DC converter module designed for commercial (ITE) applications. It delivers a regulated 5V output from a 9V minimum input, with a maximum output current of 300mA, providing 1W of power. The converter features an isolated topology for improved safety and noise immunity. Its control features include an enable pin with active-low logic. The module is housed in a compact 7-DIP through-hole package measuring 16.5mm x 16.6mm x 8.5mm. It operates over a wide temperature range of -40°C to +85°C, making it suitable for industrial environments. The CC1R5-1205SF-E is compliant with RoHS and REACH regulations, and has an MSL rating of 1 (unlimited floor life).</p>

<p>The Cincon EC6A16 is an isolated DC-DC converter from the EC6A series, delivering a regulated ±15V dual output. Each output is rated at 250 mA, providing a total power of 7.5W. The converter accepts a wide 2:1 input range of 18 to 36 VDC (nominal 24V) and achieves a typical efficiency of 84% at full load.</p><p>&nbsp;</p><p>Electrical characteristics include a switching frequency of 300 kHz, output voltage accuracy of ±2%, and a Pi-type input filter. The module features continuous short circuit protection and is designed without tantalum capacitors inside. Isolation is rated at 1500 VDC with an isolation capacitance of 560 pF and minimum isolation resistance of 10⁹ Ω. Maximum capacitive load is 2200 µF per output.</p><p>&nbsp;</p><p>The EC6A16 is housed in a 24-DIP through-hole package with 14 leads, measuring 31.8 mm x 20.3 mm x 10.2 mm. It operates over an ambient temperature range of -40°C to +85°C with derating above 71°C, cooled by natural convection. The converter carries CE and cURus approvals and meets UL60950-1 and IEC/EN/UL 62368-1 standards. It is intended for commercial ITE applications.</p>

<p>The Artesyn AEE02H12-M is a 20W isolated DC DC converter from the AEE20W-M series. It accepts a nominal 12V input (9~18V range) and provides a regulated 24V output at 840mA. Key electrical specifications include 89% typical efficiency, ±0.5% line regulation, 1.0% load regulation, and 150mV maximum ripple and noise. Protection features include overcurrent protection (150%, hiccup mode), overvoltage protection (110%), and short circuit protection. The converter operates at a switching frequency of 285kHz and has a temperature coefficient of ±0.02%/°C. It offers 4200VAC reinforced I/O isolation with insulation resistance of 10GΩ and low leakage current below 5µA. The input filter meets EN 55022 Class A and FCC Level A conducted emissions standards. The device is housed in a non-conductive black plastic case (UL94V-0) with a 5-DIP through-hole package measuring 50.8mm x 25.4mm x 12.0mm and weighing 30g. It operates over -40°C to +80°C (with derating) and is certified to medical safety standards EN/IEC 60601-1 3rd Edition and ANSI/AAMI ES60601-1 with 2x MOPP rating.</p>

<p>The Cincon CHB50-24S12 is an isolated DC-DC converter providing a regulated 12V output at up to 4.16A (50W). It operates from a minimum input voltage of 18V and achieves 88% typical efficiency. The module includes comprehensive protection: overcurrent (OCP), overtemperature (OTP), overvoltage (OVP), short-circuit (SCP), and undervoltage lockout (UVLO). Remote on/off control with an active-high enable simplifies system integration. The half brick package (61.0mm x 57.9mm x 12.7mm) uses through-hole mounting and supports a -40°C to +100°C operating range with derating. This module is designed for commercial ITE (Information Technology Equipment) applications and is certified to safety standard 60950-1 with CE and cURus approvals.</p>

<p>The Cincon CHB75W-48S24 is a high-performance isolated DC-DC converter from the CHB75W series, designed for industrial and commercial applications. It provides a regulated 24V output at 3.12A with a maximum power of 75W, operating from a wide 4:1 input voltage range of 18 to 75VDC (nominal 48V).</p><p>&nbsp;</p><p>Key electrical specifications include an efficiency of 85%, a switching frequency of 300kHz, and 1500VDC input-to-output isolation. The module incorporates comprehensive protection features including overcurrent (OCP), overvoltage (OVP), overtemperature (OTP), short circuit (SCP), and under voltage lockout (UVLO). Remote on/off control with positive logic (enable, active high) is provided.</p><p>&nbsp;</p><p>The converter is housed in a standard half brick package (61.0mm x 57.9mm x 12.7mm) with through-hole mounting. It operates over a temperature range of -40°C to +100°C (with derating) and is certified to UL60950-1, with CE and cURus approvals. The CHB75W-48S24 is suitable for ITE (commercial) equipment requiring a reliable, isolated 24V power rail.</p>