Panasonic Electronic Components

<p>The Panasonic ECK-ANA102MB is a ceramic disc capacitor designed for safety applications. It offers a capacitance of 1000 pF with a tolerance of ±20% and is rated for 440 VAC operation. The capacitor uses a Y5P (B) temperature coefficient dielectric and operates over a temperature range of -25°C to 125°C.</p><p>&nbsp;</p><p>This component is classified under the IEC60384-14 standard as sub-class Y1/X1, making it suitable for line-to-ground and line-to-line interference suppression in AC mains applications. The through-hole mounting style with a radial disc package and formed leads ensures reliable mechanical attachment on printed circuit boards.</p><p>&nbsp;</p><p>The capacitor has a diameter of 10.00 mm, a seated height of 15.00 mm, and a lead spacing of 10.00 mm. It is intended for safety-critical roles where transient overvoltage protection and noise filtering are required.</p>

<p>The Panasonic ECJ-0EB1E821K is a multilayer ceramic chip capacitor (MLCC) designed for general purpose electronic equipment. It offers a capacitance of 820 pF with a tolerance of ±10% and a rated voltage of 25 V. The X7R temperature coefficient provides stable capacitance over a temperature range of -55°C to 125°C, making it suitable for coupling, decoupling, and bypass applications.</p><p>&nbsp;</p><p>This capacitor features a small 0402 (1005 Metric) footprint with dimensions of 1.00 mm x 0.50 mm and a maximum thickness of 0.55 mm. Its surface mount design allows for automated assembly and high-density PCB layouts. The component is RoHS compliant and offers excellent solderability and resistance to soldering heat.</p><p>&nbsp;</p><p>Typical applications include general purpose filtering, coupling, and timing circuits where moderate capacitance stability is required. The X7R dielectric offers a good balance between capacitance density and temperature performance for most industrial and consumer electronics designs.</p>

<p>This is a metallized polyester film capacitor from Panasonic's ECQ-E series. It offers a nominal capacitance of 0.047 µF with a tolerance of ±10% and a DC voltage rating of 250 V. The dielectric material is polyester (metallized), providing stable performance over a wide operating temperature range of -40°C to 85°C.</p><p>&nbsp;</p><p>The component is housed in a radial leaded package with PC pin terminations. It measures 12.5 mm in length, 4.5 mm in width, and 8.5 mm in height, with a lead spacing of 10.0 mm. This construction makes it suitable for general purpose applications such as DC filtering, coupling, decoupling, and bypass circuits.</p><p>&nbsp;</p><p>The capacitor is designed for through-hole mounting, which facilitates manual assembly and prototyping. It is RoHS compliant (unverified), REACH unaffected (unverified), and has an MSL level of 1 (unverified).</p>

<p>The Panasonic ECW-FE2W104K is a metallized polypropylene film capacitor with a capacitance of 0.1 µF and a tolerance of ±10%. It is rated for 450V DC operation and features a non-inductive construction that minimizes parasitic inductance, making it suitable for high frequency and pulse circuits.</p><p>&nbsp;</p><p>This capacitor uses a flame retardant plastic case and non-combustible resin, providing enhanced safety. It exhibits excellent frequency characteristics with a low dissipation factor of 0.1% at 1 kHz, and offers high insulation resistance of at least 9,000 MΩ or 30,000 MΩ depending on test conditions.</p><p>&nbsp;</p><p>Designed for applications such as EMI/RFI suppression, high frequency switching, and high pulse or dv/dt environments, the ECW-FE2W104K can also be used in active filter circuits. It operates over a temperature range of -40°C to +105°C, with voltage derating above 85°C.</p><p>&nbsp;</p><p>The capacitor is packaged in a radial through-hole format with PC pin terminations and a lead spacing of 10.00 mm. Its dimensions are 13.00 mm length, 5.00 mm width, and 10.50 mm height.</p>

<p>The Panasonic ECQ-P1H123GZ is a polypropylene film capacitor with a capacitance of 0.012 µF and a tolerance of ±2%. It is rated for 50 VDC operation and features a non-inductive construction using polypropylene film dielectric with an epoxy resin coating. This capacitor is designed for through-hole mounting in a radial package with a 5.00 mm lead spacing and crimped PC pin terminations.</p><p>&nbsp;</p><p>Key electrical characteristics include a maximum dissipation factor of 0.1% at 20°C and 1 kHz, a minimum insulation resistance of 45000 MΩ for capacitance values up to 0.33 µF, and a withstand voltage of 125 V (250% of rated voltage) applied between terminals for 1 to 5 seconds. The operating temperature range is -40°C to +85°C, with derating required for temperatures above 70°C.</p><p>&nbsp;</p><p>This capacitor is suitable for applications requiring excellent temperature and frequency characteristics, such as Dolby circuits and oscillation circuits. The radial package with 5.00 mm lead spacing and crimped leads facilitates reliable insertion in printed circuit boards.</p>