Molex

<p>The Molex 90170-0026 is a strain relief component designed for use with the QF-50 series of ribbon cable connectors. It accommodates 26 circuits arranged in 2 rows at a 1.27mm pitch, providing mechanical support and cable strain relief for reliable connections.</p><p>&nbsp;</p><p>Constructed from black polyester resin, this strain relief features a locking mechanism to secure it to the mating part. It is rated for a maximum current of 1A per contact and a maximum voltage of 250V, with an operating temperature range of -25°C to +85°C.</p><p>&nbsp;</p><p>This accessory is packaged in a bag and is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). It is suitable for use in applications requiring secure cable management and connector protection.</p>

<p>The Molex 0705530037 is a 3 position single row shrouded header designed for board-to-cable/wire applications. It features a 2.54mm (0.100") pitch and a through hole right angle mounting style, making it suitable for compact PCB layouts where a low-profile right-angle connection is required.</p><p>&nbsp;</p><p>The header is fully shrouded with a 4-wall design and includes a latch holder fastening type for secure mating. The contacts are made of phosphor bronze with a tin finish (150.0µin thickness) and have a square shape. The insulator is black polyester, glass filled, with a UL94 V-0 flammability rating.</p><p>&nbsp;</p><p>Electrical rating is 250V, and the operating temperature range spans -40°C to 105°C. Termination is via solder. This connector is RoHS3 compliant and REACH unaffected per unverified database records.</p>

<p>Molex 1720641006 is a rectangular connector header designed for board-to-cable/wire interconnection. It features 6 positions arranged in 2 rows with a pitch of 5.70mm and row spacing of 5.70mm. The connector is shrouded with a 4-wall design and includes a locking ramp for secure mating.</p><p>&nbsp;</p><p>The header is right angle oriented with through hole mounting and solder termination. Contacts are made of copper with tin plating (0.76µm thickness) and square contact shape with 3.60mm length. The housing is black Liquid Crystal Polymer (LCP) with a flammability rating of UL94 V-0. Insulation height is 14.53mm. Additional features include a board guide and glow wire compliance.</p><p>&nbsp;</p><p>Compliance information indicates RoHS3 and REACH unaffected status, and MSL 1 unlimited, though these are unverified. The datasheet is not available. Cross-reference part number WM11211-ND (DigiKey). Electrical ratings and operating temperature are not provided and should be verified with the manufacturer.</p>

<p>Molex 89400-0410 is a 2.00mm pitch wire-to-board header from the 89400 series. It is a single-row, vertical, through-hole connector with 4 positions. The header is partially shrouded and includes a locking feature for secure mating.</p><p>&nbsp;</p><p>Electrical ratings include 4A maximum current per contact and 250V maximum voltage. Operating temperature range is -25°C to +85°C. The insulation material is Nylon with UL 94V-0 flammability rating. Contact plating is Tin with minimum 1.27µm thickness on both mating and termination areas.</p><p>&nbsp;</p><p>The header is designed for wire-to-board applications. It mates with Molex 87369 series crimp housings. The recommended PCB thickness is 1.20mm, and the mated height is 7.30mm. Packaging is in bag.</p>

<p>The Molex 1060594100 is a fiber optic coupler adapter designed for connecting SC-terminated simplex singlemode cables. It features a ceramic ferrule for precise alignment and low insertion loss, housed in a durable black polymer body. The adapter supports panel mount and bulkhead mounting, making it suitable for patch panels, enclosures, and distribution frames. A protective cap is included to keep the ferrule clean when not in use. This component is ideal for singlemode fiber optic networks in telecommunications, data centers, and enterprise infrastructure.</p>

<p>The Molex 1061430300 is a duplex fiber optic adapter designed to convert between ST and ESCON receptacle interfaces. It supports multimode fiber optic operation and is housed in a black polymer body with plastic ferrules, ensuring reliable optical alignment.</p><p>&nbsp;</p><p>The adapter features a panel mount with flange design, allowing secure installation in equipment panels or enclosures. Its mechanical construction includes a durable polymer housing and plastic ferrule material, and it comes with a protective dust cap to maintain connector cleanliness during storage or transport.</p><p>&nbsp;</p><p>This adapter is suitable for use in multimode fiber optic networks requiring conversion between ST and ESCON connector types. The duplex configuration supports two fibers for bidirectional communication. Typical applications include legacy equipment integration, test setups, and industrial networking environments.</p>

<p>The Molex 1201080238 is a circular cable assembly designed for industrial environments. It features M12 connectors on both ends, each a 4-position receptacle with male pins. The D-coded orientation ensures proper alignment in applications requiring keyed connections. The assembly is shielded for protection against electromagnetic interference and uses a round, green polyurethane (PUR) cable jacket for flexibility and durability. The cable length is 5.00 meters (16.40 feet), providing ample reach for connecting sensors, actuators, and other devices in automation systems. With an IP67 rating, this assembly is dust-tight and waterproof, suitable for harsh conditions. Both connectors are free-hanging (in-line) mounting type, and all 4 positions are loaded. The product is RoHS3 compliant, meeting environmental standards. The cable material offers good resistance to oils and chemicals, making it reliable in factory floor settings.</p>

<p>The Molex 0430200201 is a rectangular connector housing designed for free hanging (in-line) mounting. It accommodates 2 male pin contacts arranged in 2 rows with a 3mm row spacing. The housing features a locking ramp fastening type for secure mating and is terminated via crimp contacts.</p><p>&nbsp;</p><p>This connector housing is rated for an operating temperature range of -40°C to 105°C and is glow wire compliant. The housing is black in color. It is suitable for applications requiring a compact, reliable 2-position interconnect.</p>

<p>The Molex 1501781020 is a rectangular connector housing designed for free hanging (in-line) applications. This receptacle-style housing has 2 positions arranged in a single row with a 3.68mm pitch. It features a detent lock fastening type for secure mating with a corresponding plug housing. The housing is natural in color and accepts female socket contacts terminated by crimp.</p><p>&nbsp;</p><p>The housing operates over a broad temperature range of -40°C to 105°C, making it suitable for various environments. It is RoHS3 compliant, REACH unaffected, and has an MSL of 1 (unlimited). The part is part of a rectangular connector housing subcategory commonly used in wire-to-wire and wire-to-board applications.</p><p>&nbsp;</p><p>This product is manufactured by Molex, a leading interconnect manufacturer. The primary cross-reference part number is WM16556-ND (Digi-Key).</p>

<p>The Molex 2132272070 is a 20 position rectangular receptacle connector designed for board to cable/wire interconnections. It features a 1.5mm pitch and surface mount (SMT) termination with solder contacts. The forked contacts are finished with tin, plated to a thickness of 30.0µin (0.76µm), providing reliable conductivity.</p><p>&nbsp;</p><p>The connector includes a latch holder fastening type for secure mating and is rated for 100V AC/DC voltage. The operating temperature range is -40°C to 105°C, and the insulator material meets UL94 V-0 flammability rating. The natural colored insulator has a height of 8.80mm.</p><p>&nbsp;</p><p>Additional features include pick and place compatibility and solder retention, making it suitable for automated assembly processes. The connector is available in Tape &amp; Reel packaging (as well as Cut Tape and Digi-Reel options from DigiKey). Current rating is not specified as it varies with wire gauge.</p>

<p>The Molex 0022232021 is a 2-position single row header designed for board-to-board or cable-to-board connections. It features a 2.54mm (0.100") pitch and through hole mounting with solder termination. The header is shrouded with one wall and includes a friction lock for secure mating. Contacts are made of brass with a tin finish, providing reliable conductivity. The insulator is white polyamide (nylon) with a UL94 V-0 flammability rating. The overall contact length is 14.22mm (0.560") with a contact length of 7.49mm (0.295") and insulation height of 8.18mm (0.322"). This header is suitable for various applications requiring a compact, reliable interconnect solution.</p>