Eaton - Electronics Division

<p>The ATM-15 is a miniature blade-type automotive fuse from Eaton - Bussmann Electrical Division. It is rated for 15A at 32V DC with a fast blow response time and a breaking capacity of 1kA. The fuse requires a holder for mounting and is packaged in a standard miniature blade form factor. Dimensions are 10.92mm x 3.81mm x 8.81mm (L x W x H). The blue housing indicates the 15A rating. Compliance includes RoHS3, REACH unaffected, and MSL 1 (unlimited). This fuse is commonly used for overcurrent protection in automotive electrical systems.</p>

<p>The Eaton BK/S505-5-R is a 5 amp, 250 volt AC ceramic cartridge fuse from the S505 series. It features a slow blow (time-delay) response characteristic, making it suitable for circuits with inrush currents.</p><p>&nbsp;</p><p>With a breaking capacity of 1.5 kA at 250 VAC and a melting I²t of 71.3 A²s, this fuse provides reliable overcurrent protection. The 5mm x 20mm cylindrical body requires a compatible fuse holder for installation.</p><p>&nbsp;</p><p>This fuse is approved by multiple agencies including BSI, CCC/CQC, CSA, cULus, IMQ, KC, PSE/JET, SEMKO, and VDE, indicating broad international acceptance.</p>

<p>This is a fuse clip by Eaton designed for 20A cartridge fuses with a 0.394" diameter (10mm). It accepts 13/32" diameter fuses. The clip is made of spring bronze with tin finish, ensuring reliable contact. It is through-hole mounted with PC pin termination. The holder is oriented horizontally and has a single circuit. It is suitable for use in circuit protection applications where a replaceable cartridge fuse is needed.</p>

<p>The BK/ATC-10 is an automotive blade fuse manufactured by Eaton - Bussmann Electrical Division. It is rated for 10A continuous current at 32V DC and features a fast blow response time, making it suitable for protecting sensitive electronic circuits in vehicles. The fuse has a breaking capacity of 1kA at rated voltage and is UL approved for safety.</p><p>&nbsp;</p><p>The fuse uses the standard ATO/ATC blade package, which is widely compatible with automotive fuse blocks and holders. It requires a holder for mounting and is color-coded red per industry standards for 10A rating. The overall dimensions are 19.30mm length, 5.25mm width, and 12.50mm height.</p><p>&nbsp;</p><p>This fuse is designed for overcurrent protection in automotive electrical systems, including 12V and 24V applications. The fast blow characteristic ensures rapid disconnection to prevent damage to downstream components.</p>

<p>The Eaton Bussmann F03B250V1-1-2A is an electrical specialty fuse designed for overcurrent protection in government and industrial applications. Rated at 250V and 1.2A, this fuse comes in the standard 3AB/3AG package (0.250" diameter x 1.250" length, 6.35mm x 31.75mm). It requires a holder for mounting, making it suitable for panel or chassis installations where easy replacement is needed.</p><p>&nbsp;</p><p>This fuse is RoHS3 compliant and REACH unaffected, meeting current environmental standards. The 3AB/3AG form factor is widely used in power supplies, industrial controls, and test equipment. The part number indicates a 250V rating and 1.2A current rating, typical for specialty fuses in higher-voltage circuits.</p><p>&nbsp;</p><p>Engineers should verify the interrupting rating and time-delay characteristics from the datasheet for proper circuit protection design. The fuse is intended for use in circuits where a 250V, 1.2A overcurrent device is required.</p>

<p>The Eaton Bussmann F02B250V3-8A is an electrical specialty fuse designed for overcurrent protection in industrial and commercial applications. It is rated for 250 V and belongs to the F02B series.</p><p>&nbsp;</p><p>This fuse is RoHS3 compliant and REACH unaffected, meeting key environmental standards. The MSL rating is 1 Unlimited, indicating no moisture sensitivity limitations.</p><p>&nbsp;</p><p>As a specialty fuse, it is intended for use in circuits requiring reliable overcurrent interruption. The exact current rating, breaking capacity, and package details are not specified in available data.</p>

<p>The Eaton Bussmann 70C-3A is a cartridge fuse designed for overcurrent protection in telecom applications. It is rated for 3A continuous current at 125V with a breaking capacity of 1kA. The fuse is approved by CE and UR, ensuring compliance with relevant standards.</p><p>&nbsp;</p><p>This fuse features an alarm indicating function, which provides visual or electrical indication when the fuse has blown. The cylindrical, alarm indicating package has a body diameter of 7.10 mm and a length of 47.40 mm. It requires a separate holder for installation, compatible with standard fuse holders.</p><p>&nbsp;</p><p>Typical applications include telecom equipment where reliable overcurrent protection and blown-fuse indication are critical. The indicating feature aids in quick identification of failed fuses, reducing downtime. The fuse is designed for use in circuits up to 125V AC/DC.</p>

<p>The Eaton Bussmann AC2 is a 2A cartridge fuse designed for overcurrent protection in electrical circuits. It is rated for 550VAC and 250VDC, making it suitable for both AC and DC applications. The fuse features a bolt mount mounting type and comes in a cylindrical, blade terminal (bolt) package with dimensions of 0.827" diameter by 2.165" length (21.00mm x 55.00mm).</p><p>&nbsp;</p><p>This fuse is intended for use in industrial and commercial electrical systems where reliable circuit protection is required. The bolt mount design ensures secure installation in fuse holders or panels. The cartridge construction provides robust performance under rated conditions.</p><p>&nbsp;</p><p>As a specialty fuse from Eaton's Bussmann division, the AC2 is designed to meet the demands of circuit protection in various environments. Its voltage ratings cover both standard AC mains and DC circuits, offering flexibility in system design.</p>