Altech Corporation

<p>The Altech 37.016 is a 16-position terminal block plug designed for wire-to-board connections. It features a 5.08mm pitch and uses a screw rising cage clamp termination for secure wire retention. The plug is rated for 300V and 15A, supporting wire gauges from 0.5 to 2.5 mm².</p><p>&nbsp;</p><p>This plug offers free hanging (in-line) mounting with a 180° wire entry angle. The housing is green and includes retention latches on the non-wire side for added mechanical stability. Stripping length is 6mm and screw hole diameter is 3mm.</p><p>&nbsp;</p><p>Typical applications include industrial control panels, power distribution, and automation equipment where reliable and infrequent wire terminations are needed. The modular design allows for multipole configurations.</p>

<p>The Altech 930046104 is a 4mm green test plug designed for use in test and measurement applications. It features a screw-type connection for secure termination. The plug is RoHS3 compliant, ensuring it meets current environmental standards. It also has a Moisture Sensitivity Level of 1 (Unlimited), indicating no special handling requirements. Additionally, it is unaffected by REACH regulations, further simplifying compliance in European markets. This part belongs to the banana plug family, suitable for mating with compatible jacks in laboratory and industrial setups.</p>

<p>The Altech Corporation 5306131 is a cable gland with M16x1.5 metric thread, designed for cable diameters from 4.0 mm to 8.0 mm. It is constructed from polyamide (nylon) in black color, providing a lightweight and corrosion-resistant solution for cable entry points.</p><p>&nbsp;</p><p>This gland features an IP68 ingress protection rating, ensuring dust-tight and waterproof sealing suitable for demanding environments. It includes an integrated strain relief to protect the cable from tension and bending stress. The operating temperature range is -30°C to 100°C.</p><p>&nbsp;</p><p>The panel hole size required is 16.0 mm, with a thread length of 6.0 mm. This component is RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified.</p>

<p>The Altech Corporation 30.330 is a 10 position plug terminal block with a 5 mm pitch, designed for use in terminal block interconnect applications. It is rated for 9 A of current and 150 V of voltage, making it suitable for moderate power signal and control wiring.</p><p>&nbsp;</p><p>This plug features a gray and blue housing color. As a plug type terminal block, it is intended to mate with a corresponding header or socket to create a reliable and removable wire-to-board connection.</p><p>&nbsp;</p><p>The component is listed as RoHS3 compliant and REACH unaffected, though these compliance statuses are unverified. The part is classified under the Headers, Plugs and Sockets subcategory within Terminal Blocks.</p>

<p>The Altech Corporation 37.206 is a 6-position terminal block header with male pins, shrouded on 4 sides. It features a 5.08mm pitch and vertical orientation, designed for through hole soldering. The header is rated for 300V and 15A, suitable for power distribution in industrial control systems. Color is black. The single-level design accommodates 6 positions per level. This component is commonly used in PCB-to-wire connections for terminal blocks. The shrouded design provides pin protection and polarization. The 5.08mm pitch is standard for European-style terminal blocks. Applications include PLCs, power supplies, and building automation.</p>

<p>The CDB4/10(1) is a power distribution block from Altech Corporation. It features a side input 20 configuration. The component is RoHS3 compliant, REACH unaffected, and has an MSL rating of 1 (unlimited). It is designed for use in power distribution applications within terminal block systems.</p>

<p>The CMDB10/2/Y is a power distribution block from Altech Corporation designed for distributing electrical power in industrial and commercial systems. It features 4 outputs with a 10mm pitch, allowing for efficient wiring and organization. The block is rated for 60A continuous current, making it suitable for medium-power applications. It is RoHS3 compliant and REACH unaffected, meeting environmental standards. The compact design facilitates installation in terminal blocks and junction boxes.</p>

<p>The 2C1UL is a 2-pole thermal magnetic miniature circuit breaker from Altech Corporation's UL Series. It is rated for 1A continuous current at 480V AC (480Y/277V AC) and provides a C-trip characteristic for moderate inrush protection. The breaker is UL489 listed and carries CE and cULus approvals.</p><p>&nbsp;</p><p>This breaker offers a 10 kA short circuit interrupting capacity at 240V AC and 250V DC (2-pole configuration). It is designed for DIN rail mounting with a 17.5 mm width per pole. The calibration temperature is 40 °C, with an operating ambient range of -25 °C to +55 °C.</p><p>&nbsp;</p><p>The 2C1UL features a lever actuator and is line/load reversible. It is suitable for branch circuit protection in industrial control panels, distribution boards, and equipment requiring UL489 compliant overcurrent protection.</p>

<p>The Altech Corporation 934100101 is a red 4mm male banana plug designed for use in banana and tip connector applications. This connector features a 4mm plug diameter and is intended for test and measurement, laboratory, and educational setups where reliable temporary connections are required.</p><p>&nbsp;</p><p>The plug is male gender and comes in a red color for easy identification. It is compliant with RoHS3 and REACH unaffected, making it suitable for use in environments with environmental compliance requirements. The part is categorized under jacks and plugs within the banana and tip connectors family.</p><p>&nbsp;</p><p>This component is manufactured by Altech Corporation, a known supplier of industrial connection solutions. The 934100101 is a standard banana plug that can be used with compatible 4mm banana jacks and binding posts.</p>

<p>The 195-010 is a mounting plate manufactured by Altech Corporation. It is designed for use with Altech enclosures, providing a platform for mounting internal components. The plate measures 160mm by 74mm, as indicated by the MP1809 part number. This accessory is typically used in industrial control enclosures and junction boxes.</p>

<p>The Altech Corporation 1BU25R is a 1-pole thermal magnetic supplementary protector from the R-Series. It is rated for 25A continuous current at 480V AC (277/480Y VAC) and provides a short circuit withstand rating of 10kA per UL 1077. The breaker uses a B trip curve and is designed for DIN rail mounting with a 17.5mm width per pole.</p><p>&nbsp;</p><p>Key electrical specifications include a DC voltage rating of 48 VDC (self-certified) and an interrupting capacity of 10kA per IEC/EN 60898/60947-2. The device offers an electrical life of 6,000 cycles and a mechanical life of 10,000 cycles. It operates over a temperature range of -25°C to 60°C and can be stored from -25°C to 75°C.</p><p>&nbsp;</p><p>Mechanically, the 1BU25R accepts copper wire only (60/75°C) with terminal sizes from 14-3 AWG (torque 17.5 lb-in) and 18-16 AWG (torque 25 lb-in). The terminal protection degree is IP20 at the front. It is vibration resistant to 3g (18-50Hz) and can be mounted in any plane. The device is approved to CE, cURus, and UL 1077 standards.</p>

<p>This 90° adapter from Altech Corporation is designed for use with POLYFLEX® conduit tubing. It features a PG48 thread size and is constructed from polyamide (PA66) nylon 6/6, providing durability and resistance. The 90° angle allows for space-saving routing in cable management systems.</p><p>&nbsp;</p><p>This adapter is RoHS3 compliant and has REACH unaffected status. It is classified as a cable accessory for industrial applications. The MSL rating is 1 (unlimited).</p>

<p>The Altech Corporation 91.001 is a KO4071SP enclosure designed for housing electrical components. This enclosure features 4 terminals for standard wiring connections.</p><p>&nbsp;</p><p>Compliance data indicates RoHS3 and REACH unaffected status, and a Moisture Sensitivity Level of 1 (Unlimited), making it suitable for a wide range of environments without special handling requirements.</p><p>&nbsp;</p><p>This product is categorized under Boxes within the Boxes, Enclosures, Racks category. It is intended for use in applications requiring a protective housing for terminal blocks or similar components.</p>

<p>The 1C6UM is a thermal magnetic circuit breaker manufactured by Altech Corporation. It provides overcurrent protection with a current rating of 6A and a voltage rating of 480V AC. The single-pole design makes it suitable for 1-phase applications.</p><p>&nbsp;</p><p>The breaker utilizes a thermal magnetic trip mechanism for reliable protection against overloads and short circuits. It is actuated by a lever and has no illumination. The compact design supports DIN Rail mounting, commonly used in industrial control panels and distribution systems.</p><p>&nbsp;</p><p>Mechanically, the breaker is built for DIN Rail installation, which simplifies assembly and replacement. The lever actuator offers clear visual indication of the breaker status. The unit is not illuminated, reducing complexity.</p><p>&nbsp;</p><p>Compliance includes CSA, UL508, and VDE approvals. The RoHS status is indicated as RoHS3 compliant, though this is unverified. The part is designated as REACH unaffected. Moisture sensitivity level is MSL 1 (unlimited).</p>

<p>The Altech Corporation 720-051 is an MSS-40 pole mounting kit designed for use with enclosures. This kit includes two pieces for secure mounting. It is part of the MSS-40 series and is suitable for various enclosure mounting applications.</p>

<p>The Altech Corporation PSH-12048 is an AC DC converter designed for applications requiring a broad input voltage range. This unit operates with an input voltage spanning from 340 to 550 VAC.</p><p>&nbsp;</p><p>Compliance information indicates that the PSH-12048 is RoHS3 compliant, meeting environmental standards for electronic components. The Moisture Sensitivity Level (MSL) is rated as 1, signifying unlimited shelf life under standard conditions. REACH status is noted as unaffected.</p><p>&nbsp;</p><p>Further technical specifications such as output voltage, power, current, and efficiency are not detailed in the available data. Similarly, packaging and mounting type information is also missing, requiring further investigation for detailed application planning.</p>

<p>The Altech Corporation 3B30UM is a 3-pole thermal magnetic circuit breaker designed for overcurrent protection in industrial control and power distribution applications. It is rated for 30 amps at 480 volts, using a reliable lever actuator for manual switching and reset.</p><p>&nbsp;</p><p>This circuit breaker features a compact DIN rail mounting format suitable for panel assembly. It holds UL508 and CSA safety approvals, confirming its suitability for North American industrial equipment. The thermal magnetic trip mechanism provides both overload and short-circuit protection.</p><p>&nbsp;</p><p>Typical applications include motor control centers, panelboards, and branch circuit protection in machinery and automation systems. The non-illuminated lever simplifies status indication.</p>