Film Capacitors

<p>The KEMET A72QQ2220AA02J is a polypropylene film capacitor from the A72 series, designed for pulse and high frequency applications. It offers a capacitance of 0.022 µF with a ±5% tolerance and a DC voltage rating of 1000 V. The capacitor is constructed with polypropylene film and metal foil, with axial leads of tinned wire for through-hole mounting. The operating temperature range spans -55°C to +105°C, making it suitable for demanding environments. The component is encapsulated in a polyester tape wrapping case, with Tape &amp; Reel packaging available. Typical applications include resonant circuits, high frequency filtering, and snubber circuits for SCR and IGBT devices. The capacitor is RoHS compliant and features lead-free terminations.</p>

<p>The ECH-U1H102JX5 is a surface mount film capacitor from Panasonic Electronic Components. It offers a capacitance of 1000 pF with a tolerance of ±5% and is rated for 50 V DC. The dielectric material is Polyphenylene Sulfide (PPS) in a metallized stacked construction, providing stable electrical characteristics over a wide temperature range of -55°C to 125°C.</p><p>&nbsp;</p><p>The capacitor is housed in an 0805 (2012 Metric) package with solder pad terminations. Its dimensions are 2.00mm length, 1.25mm width, and 1.10mm height, making it suitable for compact PCB layouts in general purpose applications.</p>

<p>The B32922C3154M189 is a polypropylene film capacitor manufactured by TDK Electronics, designed for EMI and RFI suppression applications. It has a capacitance of 0.15 µF with a tolerance of ±20% and a DC voltage rating of 630V. The capacitor is classified as X2 safety rated, suitable for across-the-line use.</p><p>&nbsp;</p><p>The dielectric material is polypropylene (PP), which provides low ESR and stable electrical characteristics over a wide temperature range. The operating temperature spans -40°C to 110°C. The capacitor is housed in a radial package with dimensions of 18.00mm x 6.00mm and a seated height of 12.00mm. Lead spacing is 15.00mm, and terminations are PC pins for through hole mounting.</p><p>&nbsp;</p><p>Applications include EMI and RFI suppression in power supplies, industrial equipment, and consumer electronics. The capacitor is RoHS compliant and REACH unaffected, with MSL level 1. It is intended for use in DC circuits up to 630V; AC voltage rating is not specified for this variant.</p>

<p>The ECW-U1393JC9 is a surface mount film capacitor from Panasonic Electronic Components. It offers a capacitance of 0.039 µF with a tolerance of ±5% and a voltage rating of 100V DC. The dielectric material is a metallized stacked polyester and polyethylene naphthalate (PEN) film, providing stable performance over a wide temperature range of -55°C to 125°C. This capacitor is designed for general purpose applications. It comes in a 1913 (4833 Metric) package with solder pad terminations, suitable for automated assembly processes.</p>

<p>The Panasonic ECH-U1C473JX5 is a general-purpose film capacitor with a capacitance of 0.047 µF and a voltage rating of 16 V DC. It uses a metallized stacked Polyphenylene Sulfide (PPS) dielectric, providing stable performance over a wide temperature range of -55°C to 125°C.</p><p>&nbsp;</p><p>The capacitor is housed in a 1206 (3216 metric) surface-mount package with solder pad terminations. The dimensions are 3.20mm length by 1.60mm width with a height of 1.70mm. It has a tight capacitance tolerance of ±5%.</p><p>&nbsp;</p><p>This component is suitable for general purpose DC filtering, coupling, and decoupling applications where a stable, low-loss film dielectric is required. The PPS dielectric offers low dissipation factor and excellent long-term capacitance stability.</p>

<p>This DME2P1K-F is a metallized polyester film capacitor from Cornell Dubilier Electronics, part of the DME series. It has a capacitance of 0.1µF with a ±10% tolerance and a voltage rating of 250VDC, making it suitable for general purpose DC applications.</p><p>&nbsp;</p><p>The capacitor uses a metallized polyester dielectric, offering self-healing properties and stable performance over a wide temperature range of -55°C to 125°C. It comes in a radial through-hole package with a lead spacing of 7.5mm (0.295 inch). The part is RoHS3 and REACH compliant.</p><p>&nbsp;</p><p>Key electrical characteristics include a dissipation factor of 1% maximum at 25°C and 1kHz, a minimum insulation resistance of 9000 MΩ, and the ability to withstand 150% of rated voltage for one minute as a dielectric strength test. The capacitors are designed for DC applications and offer compact size relative to their capacitance and voltage rating.</p>

<p>The Panasonic ECW-U1H104JC9 is a film chip capacitor with a stacked metallized PEN (Polyethylene Naphthalate) dielectric. It offers a nominal capacitance of 0.1 µF with a tolerance of ±5%, and is rated for a DC voltage of 50 V. The component operates over a temperature range of -55°C to +105°C and exhibits a dissipation factor of 1.0% or less at 20°C and 1 kHz. Insulation resistance is a minimum of 3000 MΩ at 50 VDC and 60 seconds. The withstand voltage is 87.5 V (175% of rated voltage for 1-5 seconds).</p><p>&nbsp;</p><p>This capacitor is housed in a 1913 (4833 Metric) surface-mount package with dimensions of 4.80 mm length, 3.30 mm width, and 3.00 mm height. Termination is via solder pads, and the component is suitable for reflow soldering as per the datasheet specifications. The design is moisture-resistant with an MSL rating of 1 (unlimited).</p><p>&nbsp;</p><p>Typical applications include coupling, bypass, and general-purpose use in electronic circuits. The stacked construction helps achieve a compact footprint while maintaining stable electrical performance. RoHS3 and REACH compliance are declared, though not independently verified in this data.</p>

<p>The ECH-U1H473JX9 is a surface mount film capacitor from Panasonic Electronic Components, featuring a capacitance of 0.047µF with ±5% tolerance and a voltage rating of 50V DC. It uses a metallized stacked Polyphenylene Sulfide (PPS) dielectric, which provides stable capacitance over a wide temperature range of -55°C to 125°C.</p><p>&nbsp;</p><p>This capacitor is housed in a 1913 (4833 Metric) package with solder pad terminations, measuring 4.80mm in length, 3.30mm in width, and 1.70mm in height. It is designed for general purpose applications where stable, reliable film capacitor performance is required in a compact surface mount form factor.</p><p>&nbsp;</p><p>The stacked metallized construction offers low ESR and excellent self-healing properties, making it suitable for timing, coupling, and bypass circuits in various electronic assemblies.</p>