| Category | |
| Manufacturer Name | |
| Applications | |
| Approval Agency | |
| Current | |
| Efficiency | |
| Failure Rate | |
| Features | |
| Frequency | |
| Height | |
| Input Voltage | |
| Isolation | |
| Length | |
| Mounting Type | |
| Number of Outputs | |
| Operating Temperature | |
| Power (Watts) | |
| Storage Temperature | |
| Temperature Coefficient | |
| Type | |
| Voltage | |
| Width |
The Artesyn Embedded Power MP8-1E-1E-1L-1L-1Q-1Q-00 is a high-power AC DC converter designed for demanding applications. With a total output power of 1000W and six distinct outputs, this unit provides versatile power solutions.
Key electrical specifications include a wide input voltage range of 85-264 VAC and 120-350 VDC, with a frequency range of 47-440 Hz. It features adjustable outputs, power factor correction (PFC) meeting EN61000-3-2 standards, and remote on/off control. The converter operates efficiently, typically between 70-80% at full load, and includes features like overload protection and margining on single output modules.
Designed for robustness, the MP8-1E-1E-1L-1L-1Q-1Q-00 operates within an ambient temperature range of -20°C to 50°C (derating applies above 40°C with rear air option, and linearly to 50% at 70°C). It meets stringent safety and EMI standards, including UL, CSA, CE, and VDE certifications, with CISPR 22 Level B compliance for conducted and radiated emissions. The unit is suitable for ITE (Commercial) and Medical applications, with an optional low leakage configuration available for medical use.
Mechanically, the converter measures 254.0mm x 177.8mm x 63.5mm and is designed for chassis mounting. Cooling is managed by an internal DC fan, which is field replaceable, or optionally by customer-provided air.
The input voltage range is 85-264 VAC or 120-350 VDC, with a frequency of 47-440 Hz.
Typical efficiency is 70-80% at full load.
The operating temperature range is -20°C to +50°C (start at 0°C), with derating to -40°C to +70°C.
It has safety approvals including UL1950, CSA22.2 No. 234 Level 5, IEC950 Class 1, VDE EN60950, and CE Mark.
The power factor is 0.99 typical and meets EN61000-3-2 harmonic distortion requirements.
Yes, it has global inhibit/enable using TTL logic levels (Logic '1' and Logic '0').
The minimum hold-up time is 20 ms, independent of input VAC.