| Category | |
| Manufacturer Name | |
| Applications | |
| Approval Agency | |
| Current | |
| Efficiency | |
| Failure Rate | |
| Features | |
| Frequency | |
| Input Voltage | |
| Isolation | |
| Mounting Type | |
| Number of Outputs | |
| Operating Temperature | |
| Power (Watts) | |
| SVHC Present | |
| Storage Temperature | |
| Temperature Coefficient | |
| Type | |
| Voltage |
The Artesyn Embedded Power MP6-2P-1J-1L-1W-05 is a configurable AC DC power supply module with an 800W output rating. It offers four distinct output voltages: 20V, 10V, 12V, and 48V, with corresponding current ratings of 18A, 18A, 17A, and 4A respectively. This unit is designed for universal input, accepting a wide range of AC voltages from 85-264 VAC and DC voltages from 120-350 VDC, operating at frequencies between 47-440 Hz.
Key features include adjustable output voltage, power factor correction (PFC), remote on/off control, and a chassis mount type. The operating temperature range is -40°C to 70°C with derating. It meets various safety and EMI standards, including UL, CSA, CE, and VDE approvals, with CISPR 22 and EN55022 Level B compliance for conducted and radiated emissions.
This power supply is suitable for ITE (Commercial) and Medical applications. It supports features like current sharing on higher-rated outputs, remote sensing, overload protection, and global inhibit/enable functions. The unit is cooled by an internal DC fan, which is field replaceable, or can utilize customer-provided air.
The converter provides four outputs: 20V at 18A, 10V at 18A, 12V at 17A, and 48V at 4A.
The input voltage range is 85-264 VAC or 120-350 VDC at 47-440 Hz.
The operating temperature range is -20°C to 50°C (start at 0°C), with linear derating to 50% at 70°C. With the rear air option, the maximum is -20°C to 40°C.
It uses an internal DC fan for forced air cooling, with a field-replaceable fan and a fan fail signal. A customer-provided air option is also available.
Yes, it features power factor correction with a typical power factor of 0.99 and meets EN61000-3-2 harmonic distortion standards.
Overload protection is provided on all outputs. The unit also includes input and output OK signals and global inhibit/enable.