| Category | |
| Manufacturer Name | |
| Applications | |
| Approval Agency | |
| Current | |
| Efficiency | |
| Failure Rate | |
| Features | |
| Frequency | |
| Height | |
| Input Voltage | |
| Isolation | |
| Length | |
| Mounting Type | |
| Number of Outputs | |
| Operating Temperature | |
| Power (Watts) | |
| Storage Temperature | |
| Temperature Coefficient | |
| Turn On Time | |
| Type | |
| Voltage | |
| Width |
The Artesyn MP4-1D-1E-4LL-03 is a 600W 4-output AC-DC converter from the MP series. It accepts a universal AC input of 85-264 VAC or 120-350 VDC with a frequency range of 47-440 Hz. The converter provides up to 600W total output power with four independent outputs. It features active power factor correction (0.99 typical) meeting EN61000-3-2 harmonic distortion limits. Efficiency ranges from 70-80% typical at full load.
Each output offers ±10% voltage adjustment and remote sense for outputs greater than 2A. Current sharing is supported on outputs rated 10A or higher. The unit includes global and individual module inhibit/enable, input OK and DC OK signal indicators, and overload protection on all outputs. A built-in low-noise fan with field-replaceable design provides forced air cooling. Operating temperature range is -20°C to 50°C (derated at higher ambient with rear air option).
The converter is enclosed in a chassis-mount package measuring 254.0mm x 127.0mm x 63.5mm (10" x 5" x 2.5"). Standards compliance includes CB, CE, CSA, UL, and VDE approvals. It is suited for both commercial ITE and medical equipment applications, with a low leakage option available.
85-264 VAC or 120-350 VDC.
-20°C to 50°C (start @ 0°C).
Enclosed chassis mount with forced air cooling.
Four outputs.
600W.
Yes, with a typical power factor of 0.99 and meets EN61000-3-2.
CB, CE, CSA, UL, VDE.