Tensility International

<p>The Tensility 54-00127 is a shielded DC power jack designed for through hole, right angle PCB mounting. It features a 2.10mm inner diameter and 5.50mm outer diameter mating barrel, with a mating length of 8.20mm. The connector has 2 conductors and 3 contacts, including a single normally closed internal switch.</p><p>&nbsp;</p><p>Electrical ratings include a maximum operating voltage of 48V and a maximum operating current of 6.0A (not to be mated under load). Contact resistance is 50 mΩ maximum, insulation resistance is 100 MΩ minimum at 500 Vdc, and dielectric strength is 500 Vac for 1 minute. The operating temperature range is -25°C to 85°C.</p><p>&nbsp;</p><p>Mechanically, the jack is constructed with a black PBT insulator, brass silver-plated terminals and cover, and a copper alloy nickel-plated center pin. It is rated for 5000 mating cycles with an insertion and withdrawal force of 0.3-3.0 kgf. The component is UL 94 V-0 flammability rated and meets solderability requirements of 75% minimum coverage.</p>

<p>The Tensility International 30-00692 is a multi-conductor cable featuring 2 conductors of 24 AWG stranded tinned copper wire (11 strands of 34 AWG each). The conductors are insulated and jacketed in poly-vinyl chloride (PVC) with a nominal jacket diameter of 0.157 inches and a thickness of 0.0299 inches. The cable is rated for 300 V and has an operating temperature range up to 80 °C.</p><p>&nbsp;</p><p>This cable carries a UL Style 2464 safety rating, indicating it meets recognized industry standards for internal wiring of electronic equipment. The black jacket provides a professional appearance and is commonly used in control panels, signal transmission, and low-power distribution applications where flexibility and durability are required.</p><p>&nbsp;</p><p>The cable is sold in a 1000-foot (304.8 meter) continuous length on a spool. It is RoHS3 compliant and REACH unaffected, making it suitable for use in products bound for global markets with environmental compliance requirements.</p>

<p>The CA-2192 from Tensility International is a barrel power cable assembly designed for low-voltage DC power connections. It features a 0.7mm inner diameter, 2.35mm outer diameter plug connector on one end and wire leads on the other, making it suitable for connecting power supplies to devices with matching barrel jacks. The cable is flat and unshielded, with a length of 6.0 feet (1.83 meters), and uses 24 AWG wire. This assembly is commonly used in consumer electronics, LED lighting, and small appliances where a simple, cost-effective power connection is needed. The plug-to-wire-leads style allows for easy termination to a power source or circuit board.</p>