Film Capacitors

<p>The KEMET F461BP684J250L is a metallized polypropylene film capacitor from the F461 series, offering a capacitance of 0.68 µF with a tolerance of ±5%. It is rated for 250 VDC at 85°C and 150 VDC at 105°C, as well as 160 VAC operation. This capacitor exhibits low dissipation factor (0.05% at 1 kHz) and high insulation resistance (44.118 GOhms), making it suitable for pulse and high-frequency applications.</p><p>&nbsp;</p><p>Constructed with a metallized polypropylene dielectric, it provides self-healing properties and stable performance over a wide temperature range of -55°C to +105°C. The component is designed for general purpose and pulse circuits, with a rated dV/dt of 300 V/µs and low equivalent series inductance (ESL) of 6 nH.</p><p>&nbsp;</p><p>The capacitor is packaged in a radial lead configuration with a lead spacing of 15 mm, and dimensions of 18 mm length, 14.5 mm height, and 8.5 mm thickness. It is supplied in tape and reel packaging with a standard quantity of 300 units. Please note this part is marked as "Not for New Design" and has been replaced by the R75 series per the datasheet.</p>

<p>The ECQ-E1824KF is a metallized polyester film capacitor from Panasonic Electronic Components. It offers a capacitance of 0.82 µF with a tolerance of ±10% and a DC voltage rating of 100 V. This component is designed for general purpose applications.</p><p>&nbsp;</p><p>The capacitor uses a metallized polyester dielectric, which provides stable performance over a wide temperature range of -40°C to 105°C. It is housed in a radial through-hole package with dimensions of 12.00 mm length, 6.00 mm width, and 14.50 mm height. The lead spacing is 10.00 mm and termination is via PC pins.</p><p>&nbsp;</p><p>This capacitor is suitable for applications requiring reliable DC blocking, filtering, and energy storage. Its through-hole mounting makes it easy to integrate into PCB designs. The RoHS and REACH compliance status is indicated as compliant, though unverified.</p>

<p>The ECQ-E2274KF is a metallized polyester film capacitor from Panasonic Electronic Components, offering a capacitance of 0.27µF with a ±10% tolerance. It is rated for 250VDC and operates over a temperature range of -40°C to 105°C.</p><p>&nbsp;</p><p>This capacitor features a radial through-hole package with PC pin termination and a lead spacing of 10.00mm. The body dimensions are 12.00mm in length, 6.00mm in width, and 12.50mm in height.</p><p>&nbsp;</p><p>Designed for general purpose applications, the metallized polyester dielectric provides stable performance and self-healing properties. The component is suitable for use in power supplies, filtering, coupling, and decoupling circuits where a compact radial package is required.</p>

<p>The Panasonic ECW-F4223JL is a metallized polypropylene (PP) film capacitor with a capacitance of 0.022µF and a tolerance of ±5%. It is rated for 400V DC operation and designed for high frequency and switching applications. The capacitor features a radial through-hole package with PC pin terminations and a lead spacing of 10.00mm. Its dimensions are 12.50mm in length, 5.80mm in width, and 10.10mm in height. The operating temperature range is -40°C to 105°C, making it suitable for a variety of environments. This component is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited).</p>

<p>The Panasonic ECQ-U2A103MV is a metallized polyester film capacitor designed for interference suppression applications. It has a capacitance of 10000 pF with a tolerance of ±20% and a rated voltage of 250VAC. The capacitor is classified as X2 according to safety standards, suitable for across-the-line and line-by-pass applications. The dissipation factor is maximum 1.0% at 20°C and 1kHz. Insulation resistance is minimum 15000 MΩ at 100VDC and 2000 MΩ at 500VDC. The capacitor is housed in a flame-retardant plastic case with non-combustible resin, radial leaded with PC pin terminations and 15mm lead spacing. Dimensions are 17.5mm length, 4mm width, and 11mm height. Operating temperature range is -40°C to 85°C. The component is RoHS3 compliant, REACH unaffected, and MSL 1. It is suitable for use in EMI filters, power supplies, and other AC line applications requiring X2 rated capacitors.</p>

<p>This is a polypropylene film capacitor from Panasonic, part number ECQ-P1H822GZ3. It has a capacitance of 8200 pF with a tolerance of ±2% and a voltage rating of 50V DC.</p><p>&nbsp;</p><p>The capacitor features a dissipation factor of 0.1% maximum at 20°C and 1kHz, and an insulation resistance of 45000 MΩ minimum for capacitance ≤0.33 µF. It can withstand 250% of rated voltage for 60 seconds.</p><p>&nbsp;</p><p>Designed for high frequency and switching applications, it operates over a temperature range of -40°C to 85°C. The component is through-hole mounted with a radial package, crimped PC pins, and a lead spacing of 5.00mm. Dimensions are 12.00mm length, 5.50mm width, and 14.00mm height.</p><p>&nbsp;</p><p>The capacitor is RoHS3 compliant and REACH unaffected. It is suitable for use in oscillation circuits and Dolby circuits as recommended by the manufacturer.</p>

<p>The CB037E0473JBA is a 0.047 µF metallized PEN (Polyethylene Naphthalate) film chip capacitor from Kyocera AVX. It features a stacked construction with no external encapsulation, allowing for a compact 1812 (4532 Metric) surface-mount package. The capacitor is rated for 100V DC with a tolerance of ±5%. It operates over a temperature range of -55°C to 125°C and has a dissipation factor of less than 100 x 10⁻⁴ at 1kHz. Insulation resistance is greater than 1000 MΩ for this capacitance value.</p><p>&nbsp;</p><p>This capacitor is designed for general purpose applications in low voltage environments, including automotive (airbag, fuel injection), telecom (switching systems, modems), and industrial (SMPS, power converters). It is suitable for IR or vapor phase reflow soldering but not wave soldering. The film technology provides self-healing properties and low ESR and ESL, enhancing reliability in critical circuits. Voltage derating of 1.25%/°C applies above 105°C.</p><p>&nbsp;</p><p>The component is supplied in tape and reel packaging for automated assembly. The metallized termination features a nickel barrier with 100% matte tin plating for excellent solderability.</p>