REF16-S124-DC24V-6A
ETA
The E-T-A REF16-S124-DC24V-6A is a solid state circuit breaker designed for DC 24V applications. It offers selective protection with a 6A current rating and 30V voltage rating.
| Category | |
| Manufacturer Name | |
| Actuator Type | |
| Breaker Type | |
| Current Rating | |
| Current Rating (Amps) | |
| Illumination | |
| Mounting Type | |
| Number of Poles | |
| Voltage Rating | |
| Width |
The E-T-A REF16-S114-DC24V-6A is a solid state circuit breaker designed for DC 24V applications. It provides selective protection for load circuits with a width of 12.5 mm.
This circuit breaker features active electronic current limitation in the event of a short circuit and overload disconnection at typically 1.25 times the rated current. It supports capacitive loads up to 20,000 μF. The device has a current rating of 6A and a voltage rating of 30V.
Installation is facilitated by plugging into an E-T-A socket, available with screw or screwless terminals. The REF16-S series allows for power distribution and signaling via plug-in jumpers. Dimensions comply with DIN 43880 standards for built-in units.
Status and failure indication is provided through a multi-colored LED, a potential-free signal contact, or an integral short-circuit-proof status output. Remote actuation is possible via a remote reset or ON/OFF signal, and manual operation is available through an ON/OFF button on the device.
| Qty | Low | High |
|---|---|---|
| 1+ | $0.99 | $0.99 |
Estimated market price range - modelled values for guidance only, not live distributor offers.
The current rating is 6A.
The voltage rating is 30 V.
It is a solid state circuit breaker.
It has 1 pole.
It uses a slide switch actuator.
The illumination colors are Green, Orange, and Red.
It features active electronic current limitation.
It is designed for DC 24 V applications.
The width is 12.5 mm.
Overload disconnection occurs at typically 1.25 times rated current.
It supports capacitive loads up to 20,000 μF.
Status and failure are indicated by a multi-coloured LED, a potential-free signal contact, or an integral short-circuit-proof status output.
Remote actuation is possible via a remote reset signal or a remote control signal ON/OFF.
Manual actuation is possible using the ON/OFF button on the device.