| Category | |
| Manufacturer Name | |
| Actuator Type | |
| Breaker Type | |
| Current Rating | |
| Current Rating (Amps) | |
| Illumination | |
| Mounting Type | |
| Number of Poles | |
| Voltage | |
| Voltage Rating |
The E-T-A REF16-S114-DC24V-4A is a solid state circuit breaker designed for DC 24V applications, providing selective protection for load circuits. It features active electronic current limitation and overload disconnection at typically 1.25 times the rated current.
This breaker type is suitable for capacitive loads up to 20,000 μF. It has a current rating of 4A and a voltage rating of 30V. The actuator type is a slide switch, and it has a single pole configuration. Illumination is provided in green, orange, and red.
Designed for ease of installation, the REF16-S series can be plugged into E-T-A sockets with screw or screwless terminals. Dimensions comply with DIN 43880 for built-in units. The device provides status and failure indication via a multi-colored LED, a potential-free signal contact, or an integral short-circuit-proof status output. Remote actuation is possible via a remote reset or ON/OFF signal.
| Qty | Low | High |
|---|---|---|
| 1+ | $0.99 | $0.99 |
Estimated market price range - modelled values for guidance only, not live distributor offers.
The current rating is 4A.
The voltage rating is 30V.
It is a solid state circuit breaker.
It has 1 pole.
The actuator type is a slide switch.
Illumination is available in green, orange, and red.
It limits overcurrent to typically 1.25 times the rated current.
It supports capacitive loads up to 20,000 μF.
The operating voltage is DC 24V.