| Category | |
| Manufacturer Name | |
| Actuator Type | |
| Breaker Type | |
| Current Rating | |
| Current Rating (Amps) | |
| Illumination | |
| Mounting Type | |
| Number of Poles | |
| Storage Temperature | |
| Tape & Reel | |
| Voltage | |
| Voltage Rating | |
| Width |
The E-T-A REF16-S102-DC24V-1A is a solid state electronic overcurrent protector designed for DC 24V applications. It offers selective protection for load circuits with a width of 12.5 mm. This device features active electronic current limitation and overload disconnection at typically 1.25 times the rated current.
It supports capacitive loads up to 20,000 μF and has a current rating of 1A. The breaker type is solid state, with a single pole and a slide switch actuator. Illumination is provided in green, orange, and red.
Designed for ease of installation, it plugs into an E-T-A socket and complies with DIN 43880 dimensions. The REF16-S provides status and failure indication via a multi-coloured LED, a potential-free signal contact, or an integral short-circuit-proof status output. Remote actuation is possible through a remote reset or ON/OFF signal.
This circuit breaker is suitable for automation systems where maintaining stable voltage supply to all connected loads is critical. It responds faster to overload conditions than switch-mode power supplies, preventing voltage dips in other circuits.
| Qty | Low | High |
|---|---|---|
| 1+ | $0.99 | $0.99 |
Estimated market price range - modelled values for guidance only, not live distributor offers.
The current rating is 1A.
The voltage rating is 30V.
It is a solid state circuit breaker.
It limits the maximum possible overcurrent to typically 1.25 times the rated current.
It can handle capacitive loads up to 20,000 μF.
The REF16-S series is designed for DC 24V applications.