| Category | |
| Manufacturer Name | |
| Actuator Type | |
| Breaker Type | |
| Current Rating | |
| Current Rating (Amps) | |
| Illumination | |
| Mounting Type | |
| Number of Poles | |
| Storage Temperature | |
| Tape & Reel | |
| Voltage | |
| Voltage Rating | |
| Width |
The E-T-A REF16-S101-DC24V-8A is an electronic overcurrent protector designed for DC 24V systems, providing selective protection for load circuits. It features active electronic current limitation, typically at 1.25 times the rated current, and disconnection during overload or short circuit conditions.
This single-pole, solid-state circuit breaker has a current rating of 8A and a voltage rating of 30V. It supports capacitive loads up to 20,000 μF and operates with a nominal voltage of 24VDC. The device has a width of 12.5 mm, complying with DIN 43880 standards for built-in units when plugged into an E-T-A socket.
Status indication is provided via a multi-colored LED, a potential-free signal contact, or an integral short-circuit-proof status output. Remote actuation is possible through reset or ON/OFF signals, and a manual ON/OFF button allows for intentional start-up of individual load circuits. The protector latches into its socket and can be assigned to current ratings or slots using coding pins.
| Qty | Low | High |
|---|---|---|
| 1+ | $0.99 | $0.99 |
Estimated market price range - modelled values for guidance only, not live distributor offers.
The current rating is 8A.
The voltage rating is 30V.
It is a solid-state electronic overcurrent protector.
The operating voltage is 24VDC.
It provides active electronic current limitation, typically at 1.25 times the rated current, and disconnects during overload or short circuit.
It supports capacitive loads up to 20,000 μF.