| Category | |
| Manufacturer Name | |
| Actuator Type | |
| Approval Agency | |
| Breaker Type | |
| Current Rating (Amps) | |
| Insulation Resistance | |
| Mounting Type | |
| Number of Poles | |
| Rated Current | |
| Voltage Rating | |
| Weight |
The Schurter Inc. 4404.0096 is a thermal circuit breaker designed for equipment protection. This 1-pole device features THT terminals for convenient PCB mounting and a push-to-reset actuator.
Key electrical specifications include a rated voltage of 240 VAC and a rated current of 3A. It offers a conditional short circuit capacity of 2 kA under various conditions (IEC, UL/CSA). The circuit breaker is built to withstand 1500 VAC dielectric strength and has an insulation resistance greater than 1000 MΩ at 500 VDC.
Environmental and thermal data indicate a degree of protection of IP40 on the front side. Allowable operating temperatures vary slightly with current, ranging from -5°C to 60°C for 3A and 5-15A ratings, and -5°C to 50°C for 4A.
Designed for reliability, the T9-series breaker boasts a minimum endurance of 50 switching cycles under IEC conditions and typical endurance of 2500 to 6000 switching cycles depending on the current rating. Solderability is rated at 245°C for 3 seconds, and resistance to soldering heat is 260°C for 10 seconds, adhering to IEC standards.
240 VAC and 48/32 VDC.
-5 °C to 60 °C for 3A and 5-15A ratings; -5 °C to 50 °C for 4A rating.
3A (with range 3-15A depending on approval).
Push to Reset.
1 pole.
CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, UL1077.
Through Hole.