| Category | |
| Manufacturer Name | |
| Actuator Type | |
| Ambient Temperature | |
| Breaker Type | |
| Current Rating | |
| Current Rating (Amps) | |
| Failure Rate | |
| Illumination | |
| Insulation Resistance | |
| Mounting Type | |
| Number of Poles | |
| Voltage Rating |
This E-T-A 1658-G41-04-S80-10A is a thermal overcurrent circuit breaker with a single pole configuration. It features a push-to-reset actuator and is designed for panel mounting.
The circuit breaker has a current rating of 5 to 30 Amps and a voltage rating of 240 VAC or 28 VDC. It offers an interrupting capacity of 2,000 A at specified voltage and current conditions. The device is built to meet international requirements and is UL, CSA, VDE, and EN 60934 approved.
Key electrical specifications include a rated impulse withstand voltage of 2.5 kV and a dielectric strength of 3,000 V in the operating area. Insulation resistance is greater than 100 MΩ. The operating temperature range is -20 to +60 °C.
Typical applications for this series include battery chargers, consumer products, power supplies, and motors. The compact and lightweight design makes it suitable for various integration needs.
The breaker is rated for 240VAC and 28VDC.
The current rating is 10A.
The operating temperature range is -20°C to +60°C, with a maximum of +40°C for currents below 8A.
The interrupting capacity is 200A (Icn) and up to 2,000A under UL 1077/EN 60934 PC1 conditions for specific voltage and current ranges.
The operating area is IP40 and the terminal area is IP00.
The typical life is 1,000 operations at 2 times the rated current.
The actuator type is push-to-reset.