Uncategorized

The clamp meter is a useful tool for precisely recording various electrical parameters. With a measuring range of 0 to 600 V for AC voltage and 0 to 1000 A for AC current, it offers sufficient flexibility for various applications. In addition to measuring active power, power factor, active energy and frequency, the clamp meter also allows you to monitor power consumption and the associated costs. With its compact dimensions of 220 x 195 x 105 mm, it is handy and easy to use. The device's internal memory can store up to 2000 data records, which can be conveniently called up via the LC display. To transfer the data to a PC, however, it is necessary to install the supplied software, which enables both tabular and graphical visualisation of the data. The data can also be exported to a text document. Continuous data recording, which can be started via the clamp meter, takes place at intervals of one second until the memory is full. This memory can only be called up in the device. In addition, alarm functions can be set for upper and lower limit values for the measured power, AC voltage and AC current. The integrated "cost function" allows the operator to set a cost factor to display the total cost of consumption. In addition, a weight factor can also be set to determine gas consumption, for example. All in all, the clamp meter offers a wide range of applications and functionality for measuring and controlling electricity and energy consumption.

The electrical tester is designed for accurate measurement and analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring voltage, current, active power, power factor, frequency, and energy consumption in kWh. In addition to the color display, the electrical tester has additional input jacks for measurements up to 2 A. The measurement range of .1 ... 5 W allows power measurement for many consumers in industry and crafts. The electrical tester has a current measurement range of .1 ... 2 A AC with a resolution of 1 mA.  In the settings of the electrical tester, an alarm value can be set for the power and current value, which gives an audible warning when exceeded. The electrical tester comes with 4 safety measurement cables, and the measurement jacks are also protected against electric shock to enable the operator to measure safely. The power meter can be used in the laboratory on the table as well as in industrial environments, thanks to the adjustable stand bracket.

The clamp meter redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp meter allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.The graphical representation of waveforms and vector graphics allows users to visually capture and analyze electrical signals. These features provide insights into the quality of electrical power and aid in identifying issues in the network. The device can also detect and display sags, surges, or flickers in the power supply network. The broad measurement range or desired selection allows the integrated data logger with generous 8 GB storage to store and archive extensive measurement data for later analysis. This ensures continuous data capture that can also be scheduled. The clamp meter is equipped with LAN and USB interfaces, enabling convenient data transfer and remote control. These interfaces offer seamless integration of the clamp meter into existing networks and systems. The included flexible current clamps with a capacity of up to 3 A facilitate the measurement of high currents and provide accurate results, even in challenging applications.The clamp meter complies with international standards (IEC61-4-3, 61-4-15, 61-4-7, EN516), ensuring the quality and accuracy of measurements and ensuring that it meets the demanding requirements of professional applications. Whether testing operational characteristics of transformers, lighting systems, or switching electronics such as frequency converters or power supplies – our clamp meters guarantee the highest accuracy and are capable of precisely analyzing even complex signal waveforms.

The clamp meter redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp meter allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.The graphical representation of waveforms and vector graphics allows users to visually capture and analyze electrical signals. These features provide insights into the quality of electrical power and aid in identifying issues in the network. The device can also detect and display sags, surges, or flickers in the power supply network. The broad measurement range or desired selection allows the integrated data logger with generous 8 GB storage to store and archive extensive measurement data for later analysis. This ensures continuous data capture that can also be scheduled. The clamp meter is equipped with LAN and USB interfaces, enabling convenient data transfer and remote control. These interfaces offer seamless integration of the clamp meter into existing networks and systems. The included flexible current clamps with a capacity of up to 3 A facilitate the measurement of high currents and provide accurate results, even in challenging applications.The clamp meter complies with international standards (IEC61-4-3, 61-4-15, 61-4-7, EN516), ensuring the quality and accuracy of measurements and ensuring that it meets the demanding requirements of professional applications. Whether testing operational characteristics of transformers, lighting systems, or switching electronics such as frequency converters or power supplies – our clamp meters guarantee the highest accuracy and are capable of precisely analyzing even complex signal waveforms.

The power meter is a tabletop device for measuring effective power, apparent power, power factor, energy consumption, current, continuous voltage, resistance and frequency. The power meter also offers the possibility to connect industrial current converters with a transmission relation of 1/5A or 1/5A. Its large 93 x 52mm LCD is easy to read and provides a variety of results, including Watts, cos φ, ACV and ACA. With the optional PCE-PA ADP current adaptor with ground wire (up to 1ACA) it can safely and quickly measure and analyse with the help of the power meter. Measurement of current and power can be done directly with test cables that come with the device or indirectly using the clamps. The device has an RS-232 interface, and software* to analyse results and transfer data to a computer. This makes it the ideal device for any workshop or for measuring power to determine faults in devices. *Soft-lut-usb software is available in the accessories tab   

36° rotating head with adjustable eye relief / Diopteradjustment / LC display The digital microscope impresses with its diverse application options in teaching and laboratory operations. Due to the technical equipment and great reliability, the digital microscope is particularly well suited to be used in advanced teaching facilities as well as in laboratories. The tripod from the digital microscope consists of the light yet strong material, aluminum, and is modern and ergonomically shaped. The eyepieces are very user-friendly, since both the diopter and the eye relief can be adjusted. This makes it easy for people who wear glasses to work with the digital microscope. There is also a rheostat on the side of our digital microscope with which the brightness can be easily adjusted. The LED light from the digital microscope is very durable and requires little maintenance. The color temperature is similar to that of sunlight, so an examination under the digital microscope is possible that is comparable to that under daylight.  The LCD screen built on the 3rd eyepiece enables viewing of the specimen through the eyepieces and simultaneously on the screen. This allows e.g. when used in schools, the teacher to quickly check the settings and the preparation. As a further option, the screen offers an output option to an external imaging device such as a large screen or projector.

The barometric pressure meter has a measuring range of -3 ... 6°C / -22 ... 14°F and can be used in cold environments. In addition to temperature and humidity measurement, the barometric pressure meter can also measure the absolute air pressure in the ambient atmosphere in a measuring range between 7 ... 11 hpa. Due to the different sensors, the barometric pressure meter already covers a wide range of measuring tasks. Typical applications of the barometric pressure meter are, for example, the monitoring of refrigeration facilities, greenhouses or also in the monitoring of an office workplace.  The measured values are stored on the internal memory of the barometric pressure meter . The barometric pressure meter has a memory capacity of 1334 measuring points. Once a measurement run has been completed, the stored measurement data can be read out from the barometric pressure meter independently of the operating system. This is possible because the barometric pressure meter is recognised as a mass data memory. When storing the measurement data, the measurement points are saved in a .pdf and in a .csv file. With the corresponding software for the barometric pressure meter , the measured values can be displayed graphically. In addition, settings for the barometric pressure meter can be made via the software. For example, the storage interval can be set between 1 minute and 24 hours, visual alarm limits and start/stop pulses can be set for the barometric pressure meter . Optionally, the barometric pressure meter can be equipped with an ISO calibration certificate.

The humidity detector was designed in collaboration with biomass power plant operators. Since the heating value of pellets depends strongly on its moisture the humidity detector ensures high efficiency. The humidity detector performs a resistance moisture detection. This means that the humidity detector measures the resistance of the test sample in order to gain information about its moisture due to its characteristic curve. Therefore it is of great importance to select the appropriate characteristic curve and temperature of the humidity detector. The humidity detector is applicable for comparative measurements of pellets that are made of either sawdust, wood chips, straw, hay, scraps of pellets, shells of sunflowers, buckwheat, corn, soy, etc. Therefore, simply plunge the 1 mm long sensor into the pile of pellets and the measuring data will be collected after its stabilization. The humidity detector only measures at the tip of its sensor-probe. It is advised to perform several measurements at different points in order to achieve an adequate overview of the water content of the pile. Thus the humidity detector helps providing quick, easy and low-cost information about pellets moisture.

The PCE-PFG force measuring device is a handy, digital measuring device for measuring tensile and compressive forces. The force measuring device offers a sampling rate of 5 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 1 measurements. The measurement data and a statistical evaluation of the data stored in the force measuring device (MIN / MAX / average) are shown on the graphic display and can be transferred to a PC via the USB interface. In addition, the force measuring device offers a limit value function MIN / MAX, which can switch a multi-colored LED (yellow / green / red) and switching contacts. The graphic display can be rotated and the force measuring device can be securely attached to a test stand using the M4 threaded holes on the back. The force is introduced into the internally installed load cell via an M6 threaded rod. Various mounting pieces are included in the scope of delivery of the force measuring device. The force measuring device can be operated continuously for up to 36 hours on a single charge (without background lighting) and is a reliable partner as a mobile force measuring device.  

Multifunction Conductivity Meter is a portable, easy-to-use measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Multifunction Conductivity Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.   Temperature compensation guarantee a high level of accuracy even with variable temperature measurements. PCE-PHD 1-R is supplied with a redox electrode. Additional electrodes are available for purchase separately, as is an optional mains adapter for power and a software kit with an RS-232 cable. PCE-PHD 1-LF acts as a real-time data logger. All values can be stored directly on the included SD card in Microsoft Excel format or transferred to a PC by means of the RS-232 port. Thus, no additional software is required for evaluation of the data. 

The advanced environmental meter stands for precision, user-friendliness, and GLP compliance (Good Laboratory Practice). With a high-resolution LCD display, the environmental meter provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors.  A Permanent Measurement Verification (PMV) indicates to the operator, using a color bar, where the measurement value is located within the calibration range, providing insight into whether the measurement is in the correct range.The graphically guided calibration makes the process simple and user-friendly. User and sample management enable easy navigation and adjustment of measurement parameters on the environmental meter. Sample information can be stored to facilitate the management and identification of measurements. A generous internal data storage saves extensive records without the need for external storage. The USB-C port on the environmental meter ensures fast data transfer and charging. A powerful LiPo battery allows hours of measurements before needing to be recharged.  Overall, this environmental meter represents a significant step in the development of handheld and laboratory instruments. The high accuracy of ± .2 pH + 2 Digits, graphically guided calibration, GLP compliance, user and sample management, and data storage make it an indispensable tool for scientists, researchers, and laboratory technicians relying on precise pH measurements. It not only enhances the accuracy and efficiency of experiments but also streamlines daily work in industry, quality assurance, and the laboratory.

The redox meter is the optimal tool for checking the most important water parameters. The portable redox meter is used to control pH and conductivity. It also serves for simultaneous temperature measurement. Furthermore, the redox meter can be used to measure the redox potential.  A three-point calibration and automatic temperature compensation up to 9°C / 194°F guarantee high accuracy even with fluctuating measuring temperatures. The redox meter has an easily readable display. The test device is delivered including a redox probe, calibration and storage liquid.

The pH meter was developed to directly determine the pH in aqueous media or water based solutions. The waterproof pH tester PCE-PH2 is used for the fast and accurate measurement of pH. The practical display makes the pH value on the pH meter easy to read. Due to the waterproof and robust housing (IP 67), the pH value tester can also be used under difficult conditions. A recalibration always guarantees optimum accuracy and is very easy to perform using the optionally available calibration kits (automatic calibration function without calibration screws - to be performed only via the keyboard). Water quality in aquariums is extremely important for the living organisms that inhabit it. Slight changes in pH level and temperature may lead to aggravating results and even death of the fishes or reptiles in the water tank. Therefore, application of the appropriate pH meter is required. The ecosystem in the aquarium must be as much similar to the natural conditions as possible. So, the measurements should be regular and provide accurate result. Depending on the purpose of creating an aquarium, commercial, scientific (experimental and laboratory tests), decorative, the most desirable pH level should be maintained to provide correct living conditions for the fishes and other possible organisms there. Modern devices are often portable and easy-to-use instruments which help to monitor the changes in the pH level during the day or from day to day etc. The glass electrodes have long service life and due to a high level of precision and wide measurement range, it is possible to apply the meter often and detect the slightest deviations. For this type of measurements, the presence of the temperature sensor is very important, since the temperature change may occur within one aquarium, and it should be detected at once. Not depending on the purpose, the aquarium is supposed to fulfil the main task of its own is to create the best conditions and the most favourable medium. This task may be a bit more challenging that it seems to be, because just filling-in the tank with fresh water is not enough and much depends on the parameters which the water has and how they may change with the time. Depending of the fish type, there may be slightly different requirements to the pH level of water (from 6 to 8, in average, but there may be exceptions). A very influential factor is also the type of water the owner decides to choose for the aquarium. Fresh and salty water have different desirable pH levels and it is important to take into consideration. As a rule, salty water has a higher pH value than fresh (8 and more). Before choosing the inhabitants for the aquarium, it is necessary to learn more about their natural habitat, because the conditions in aquarium should be maximally adjusted to the natural ones. The level of pH in aquarium should eb maintained on the desirable level. The growth of pH may have a destructive influence, since the growing ammonia deteriorates the water quality and may be very harmful to the fishes. That is why, pH level control in aquarium is practically a daily task, if your intention is to have a beautiful water tank with healthy inhabitants. Fishes are very sensitive to the fluctuation of pH, especially if the values are much different from the natural and usual ones for them. pH tester allows the user for checking the current pH level within just a few seconds and make the changes immediately if the deviation happens.

The environmental meter with a measuring range of -2… 20 pH is used to analyze liquid samples. Thus, the water quality of swimming pools, lakes or rivers can be determined with the environmental meter. A 3-point calibration can be carried out on the environmental meter so that the measurement result is as accurate as possible. In addition, an automatic temperature compensation is carried out for each measurement. In order to operate the environmental meter, it must be connected to an Android capable device. The corresponding app for the environmental meter can be downloaded free of charge from the Play Store. The measured values ​​are displayed and saved with the app for the environmental meter. After the measurement data have been saved, a PDF report can be generated via the app.

The pH process controller values ​​for the 2-point control are programmed via the buttons of the pH controller, which are located on the front. Also in the front is the LED display, on which the current measured value can be read at any time. This facilitates the fast and precise control of the water values, especially in the industrial process.  A pH electrode is connected to the pH controller via BNC plug. The screw connections can be used to connect a temperature probe for automatic temperature compensation to the pH process controller. The pH controller finds its application in electroplating, the control of fresh and wastewater or in the wastewater neutralization. Due to the compact dimensions, the pH controller fits in every control panel.

Multifunction Conductivity Meter is a portable, easy-to-use measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Multifunction Conductivity Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.   Temperature compensation guarantee a high level of accuracy even with variable temperature measurements. PCE-PHD 1-LF is supplied with a conductivity electrode. Additional electrodes are available for purchase separately, as is an optional mains adapter for power and a software kit with an RS-232 cable. PCE-PHD 1-LF acts as a real-time data logger. All values can be stored directly on the included SD card in Microsoft Excel format or transferred to a PC by means of the RS-232 port. Thus, no additional software is required for evaluation of the data. 

This pH Meter is a portable, easy-to-use measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Multifunction pH Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water. Three-point calibration and automatic temperature compensation guarantee a high level of accuracy even with variable temperature measurements. The pH meter is supplied with both a pH electrode and a temperature sensor. Additional electrodes are available for purchase separately, as is an optional mains adapter for power and a software kit with an RS-232 cable. The pH meter acts as a real-time data logger. All values can be stored directly on the included SD card in Microsoft Excel format or transferred to a PC by means of the RS-232 port. Thus, no additional software is required for evaluation of the data.

The pipe camera is used to inspect channels and pipes. Depending on the model, the pipe camera has a 6 m / 196.9 ft or 12 m / 393.7 ft fiber optic push cable. At the end of the pipe camera, a motorized camera head is mounted. This camera head is able to be moved 36° horizontally and 18° vertically. Furthermore, the camera has a motorized focus, which makes it possible to realize field of view depths between 2 and 1 cm. At the head of the pipe camera are 4 ultra-bright LEDs, which perfectly illuminate tubes and channels. The pipe camera has an electronic meter counter, which makes it easier to pinpoint damaged areas or blockages in pipes. For documentation, images and videos can be recorded and saved with the pipe channel camera. For a better view of the image, the pipe camera can be connected via HDMI cable to an external monitor. The pipe camera takes pictures in 18P, so no detail is lost. To add commentary to the scan, the USB keyboard can be used. The pipe camera is supplied on a robust, made of aluminum, trolley. Additionally included is a trolley and a roller guide for the camera, which are used to mount the camera head. As a result, pipes and ducts between 8 and 12 mm / 3.1 ... 47.2 in can be driven.

The moisture meter has a measuring range of .…. 1.%. For a measurement, the ball head is positioned on the test object by the moisture meter. This guarantees a non-destructive measurement with the moisture meter. The moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces. A connection can be established with the moisture meter via the free app. As soon as a connection has been established, the current measured value is displayed by the moisture meter. The recorded data can be exported as .csv and .pdf after a measurement. This means that the data measured by the moisture meter can be processed further.

The parcel scale is a very precise measuring device for determining weights due to the resolution of 1 g and an accuracy of ± .1% of measuring range. The display units available on the parcel scale are lb / oz, kg / g, kg, g, lb, oz. The illuminated LC display of the parcel scale is sized in such a way that the measured value can be read easily even in very bright ambient conditions. In addition, the display of the parcel scale can be removed and can be positioned freely because of the spiral cable. With the piece counting function, the parcel scale can determine the number of objects, such as screws. For this purpose, a reference measurement is first carried out on the parcel scale. The piece counting function is then started by pressing a button. As an extension of the piece counting function, the weighing surface of the parcel scale can be opened to the side. In this way, for example, stacked envelopes or similar can be weighed with the parcel scale without them falling off the weighing surface. The parcel scale is supplied with power via a 6 V DC mains power adapter. In addition, the parcel scale can be operated with three 1.5 V batteries. This means that the parcel scale can be used both stationary and mobile. The automatic switch-off ensures that the parcel scale switches itself off within 5 minutes of inactivity. PCE Instruments optionally offers an ISO calibration certificate for the parcel scale.

The parcel scale is a very precise measuring device for determining weights due to the resolution of 1 g and an accuracy of ± .1% of measuring range. The display units available on the parcel scale are lb / oz, kg / g, kg, g, lb, oz. The illuminated LC display of the parcel scale is sized in such a way that the measured value can be read easily even in very bright ambient conditions. In addition, the display of the parcel scale can be removed and can be positioned freely because of the spiral cable. With the piece counting function, the parcel scale can determine the number of objects, such as screws. For this purpose, a reference measurement is first carried out on the parcel scale. The piece counting function is then started by pressing a button. As an extension of the piece counting function, the weighing surface of the parcel scale can be opened to the side. In this way, for example, stacked envelopes or similar can be weighed with the parcel scale without them falling off the weighing surface. The parcel scale is supplied with power via a 6 V DC mains power adapter. In addition, the parcel scale can be operated with three 1.5 V batteries. This means that the parcel scale can be used both stationary and mobile. The automatic switch-off ensures that the parcel scale switches itself off within 5 minutes of inactivity. PCE Instruments optionally offers an ISO calibration certificate for the parcel scale.

The thermo-hygrometer is a measuring device for orienting measurement of temperature and relative humidity. With a temperature measuring range of -1 ... 5 °C and a humidity measuring range of 2 ... 9% RH the thermo-hygrometer covers a wide range of tasks. The thermo-hygrometer is used, for example, to monitor climatic conditions at workplaces, in cold stores or in the environment. In addition to the normal measuring mode, the thermo-hygrometer has a MIN / MAX function. This means that the thermo-hygrometer can continuously display the largest or smallest measured value. The low power consumption of <1 µA guarantees a long battery life.

PCE-PTS 1N is a heavy-duty, pallet truck, pallet jack, warehouse, dock or floor scale used to weigh industrial shipments up to 2 kg / 449 lbs / 2.2 Tons. Save precious time by weighing your pallets of merchandise right on the pallet jack. Eliminate the use of a forklift to carry pallets of items to a separate scale for weighing. Weigh your goods right at the dock during loading or unloading.